Eames Rectangular Coffee Table
to
3
1
4
4
3
3
1
Vintage Charles Eames for Herman Miller Rectangular White and Black Side Table
By Charles and Ray Eames, Herman Miller
Located in Chattanooga, TN
This listing is for the side table alone. The chair and accessories pictured are NOT INCLUDED.
Vintage Charles Eames white side table for Herman Miller. The rectangular end table rests on a black four-star base. The pedestal design allows for maximum leg room beneath the table. The table top is made of an easy to maintain and durable laminate material (Formica type). Leveling glides on the feet can be adjusted maintain balance on uneven floors. This white laminate top is original and features the Herman Miller label beneath. The Eames table was first designed in the Mid-Century Modern era and has endured through the decades with it’s timeless, versatile design. This table is well suited at home or in the office. Commercial settings, rentals, and homes with children benefit from the durable laminate surface.
22 7/8” Wide x 29.75” Deep x 17.75” High
Condition: Original vintage condition with exceptionally clean table top.
We also have a 32 inch square Eames table. A white marble Eames coffee table is also available. Complete your office with Charles Pollock Executive chairs (sold separately) in blue velvet...
Category
Vintage 1980s American Mid-Century Modern Coffee and Cocktail Tables
Materials
Marble, Metal, Aluminum
Eames for Herman Miller 32 Inch Round White Marble Coffee Table
By Charles and Ray Eames, Herman Miller
Located in Chattanooga, TN
This listing is for the coffee table alone. The chair and accessories pictured are not included.
Vintage Eames white marble coffee table for Herman Miller. The 32″ diameter coffee table rests on a classic Charles Eames aluminum contract base with black post. The feet feature leveling glides to maintain balance on uneven floors. Eames’ coffee table is typically seen with a white laminate or wood top. This white marble top may be a post-market modification. The Eames cocktail table was first designed in 1958 and has endured through the decades with it’s timeless design.
32” round x 26” High
Condition: The table top has some light wear including a couple of spots on top and small nicks along the edge.
We also have two 32 inch square Eames tables and a boomerang shaped desk on an Eames aluminum base. Complete your office with Charles Pollock Executive chairs (sold separately) in blue velvet, red or blue fabric. Eames collectors will be happy to know that we have twenty naugahyde stackable Eames shell chairs...
Category
Vintage 1970s American Mid-Century Modern Coffee and Cocktail Tables
Materials
Marble, Metal, Aluminum
"La Fonda" Marble Top Coffee Table by Charles & Ray Eames for Herman Miller
By Charles and Ray Eames, Herman Miller
Located in San Diego, CA
A gorgeous "La Fonda" coffee table designed by Charles and Ray Eames for Herman Miller with original Botticinno marble top and polished aluminum base, circa 1970s. This rare table wa...
Category
Mid-20th Century American Mid-Century Modern Coffee and Cocktail Tables
Materials
Marble, Aluminum
Charles & Ray Eames Contract Table Oak veneer for Vitra
By Charles Eames, Vitra, Charles and Ray Eames
Located in Amsterdam, NL
Elegant small dining or bistro table by Charles & Ray Eames for Vitra. The table has a chrome-plated aluminum base with a powder-coated stand and a table top veneered with oak and so...
Category
Vintage 1960s German Mid-Century Modern Dining Room Tables
Materials
Aluminum, Chrome
Related Items
1950s Gaming Table by Charles Eames for Herman Miller
By Herman Miller, Charles Eames
Located in Sagaponack, NY
A square dining or game table with an ash top, on folding steel legs. Model DTM.
Category
Vintage 1950s American Mid-Century Modern Game Tables
Materials
Steel
Eames Aluminum Group Dining Table for Herman Miller
By Charles and Ray Eames
Located in Cincinnati, OH
A nice sized medium ebony toned dining table with satin black edge having black pedestals attached to cast aluminum star bases with adjustable foot pads. Retains the labels designed ...
Category
Late 20th Century North American Mid-Century Modern Dining Room Tables
Materials
Wood
Small Jean Prouvé Guéridon Dining Table in Natural Oak for Vitra
By Jean Prouvé, Vitra
Located in Glendale, CA
Small Jean Prouvé Guéridon dining table in natural oak for Vitra. Designed in 1949 for the University of Paris, the Guéridon is an ea...
Category
21st Century and Contemporary French Mid-Century Modern Dining Room Tables
Materials
Steel
Charles Eames "Aluminum Group" Coffee Table by Herman Miller
By Charles and Ray Eames
Located in Brooklyn, NY
This Mid-Century Modern coffee table features a white laminate top with black rubber trim and supported by an aluminum base. The original Eames for Herman Miller sticker is affixed t...
Category
Vintage 1950s American Mid-Century Modern Coffee and Cocktail Tables
Materials
Plastic
Eames for Herman Miller LTRT Table Anniversary Edition!
By Charles and Ray Eames, Herman Miller
Located in Philadelphia, PA
Eames Blue top LTRT Table, part of Herman Miller "Select" Program. Produced in 2012 in red, yellow, and blue. In Clean condition!
Category
2010s American Mid-Century Modern Side Tables
Materials
Metal
Standing Height Herman Miller Eames Contract Base Table
By Charles and Ray Eames, Herman Miller
Located in South Charleston, WV
Produced 2010 and never used for the facility. In pristine condition with a few scuffs to feet and otherwise flawless. 36" wide 29" tall with matching black adjustable feet. Cherry l...
Category
2010s American Mid-Century Modern Dining Room Tables
Materials
Steel
Large Jean Prouvé Guéridon Dining Table in Natural Oak for Vitra
By Jean Prouvé, Vitra
Located in Glendale, CA
Large Jean Prouvé Guéridon dining table in natural oak for Vitra. Designed in 1949 for the University of Paris, the Guéridon is an early masterpiece by the French designer and engineer Jean Prouvé. The Guéridon is executed in solid wood with oiled finish; available in natural or smoked oak or American walnut as well as two sizes. This listings if for the large Guéridon table...
Category
21st Century and Contemporary French Mid-Century Modern Dining Room Tables
Materials
Steel
Eames Ctw Coffee Table in Beech for Herman Miller, circa 1950
By Charles and Ray Eames, Herman Miller
Located in San Diego, CA
This 3rd Generation Eames CTW Coffee Table for Herman Miller was made in 1950. This table consists of a circular five-layer plywood top, sitting upon four matching legs of bent plywood to a near 90 degrees. CTW was the abbreviated name of the Coffee (C) Table (T) with a Wood (W) base and is an iconic Mid-Century Modern piece. We have restored but not refinished to keep the overall vintage look to the piece. This would be an amazing addition to any space and certainly a conversation starter. This piece has been refinished to perfection.
Dimensions: 15.75”H x 34"W
About the CTW:
Released as part of the 1946 plywood group of furniture, CTW was the abbreviated name of the Coffee (C) Table (T) with a Wood (W) base. The Eames CTW Coffee Table consisted of a circular five-layer plywood top, sat upon four matching legs of bent ply to a near 90 degrees.
The plywood group was the first to be released to the general market for adults by the Eames Office in 1946. The furniture was manufactured first by the Evans Molded Plywood Company and sold through distributor Herman Miller. Miller then bought and took over the range entirely from 1950.
The group was the first of many from the Eames Office to consist of identical tops and different bases to create varying choices. This would famously be a theme for Eames design and seen to an even greater scale with the fiberglass range. The CTW had two matching all wood chairs in the group, the dining DCW and the lounge LCW as well as a sister rectangular table, the OTW. The Eames CTW Coffee Table and matching chairs were also replicated with metal legs and so named the CTM, DCM and LCM.
The Eames CTW tables...
Category
Vintage 1950s American Mid-Century Modern Coffee and Cocktail Tables
Materials
Beech
Charles Eames for Herman Miller Dining Table
By Charles Eames, Herman Miller
Located in Pasadena, TX
36" Eames for Herman Miller dining table
Laminated top with contract aluminum 4 star base. Great for dining or conference room ...
Category
Late 20th Century North American Mid-Century Modern Dining Room Tables
Materials
Aluminum
1950s Vintage Herman Miller Eames CTM Coffee Table
By Charles and Ray Eames
Located in Saint Paul, MN
Third generation black CTM by Ray and Charles Eames for Herman Miller. No label. Retains original feet.
Likely produced in 1950 (due to the domes of silence) as opposed to a late...
Category
Mid-20th Century American Mid-Century Modern Coffee and Cocktail Tables
Materials
Metal
Charles and Ray Eames CTW Coffee Table in Plywood Herman Miller 2000s
By Charles and Ray Eames, Herman Miller
Located in Ft Lauderdale, FL
Charles and Ray Eames CTW Coffee Table in Plywood Herman Miller 2000s.
Molded birch plywood classic mid-century design. Early 2000's production.
Category
21st Century and Contemporary American Mid-Century Modern Coffee and Coc...
Materials
Plywood
Eames for Herman Miller Table Post Modern Look
By Charles and Ray Eames, Ettore Sottsass, Herman Miller
Located in BROOKLYN, NY
A post modern take on a classic design. Eames Aluminum group dining or conference table with an 80's take. Stunning cork laminate top with almond edge banding makes this table very d...
Category
1990s American Mid-Century Modern Dining Room Tables
Materials
Aluminum, Steel
Previously Available Items
Charles & Ray Eames Contract Table Oak veneer for Vitra
By Charles Eames, Vitra, Charles and Ray Eames
Located in Amsterdam, NL
Elegant small dining or bistro table by Charles & Ray Eames for Vitra. The table has a chrome-plated aluminum base with a powder-coated stand and a table top veneered with oak and so...
Category
Vintage 1960s German Mid-Century Modern Dining Room Tables
Materials
Aluminum, Chrome
Vintage Herman Miller 32 Square Solid Wood Top Eames Table
By Charles and Ray Eames, Herman Miller
Located in Chattanooga, TN
Vintage Eames table by Herman Miller. The 32″ square table is compact and versatile. Use this table in the dining room, kitchen, or office. The table was first designed by Charles and Ray Eames in 1964. The elegant yet utilitarian table was meant to adapt a variety of needs and settings. The sleek, stem-like, base maximizes leg room. The table has the signature four-prong aluminum base. Leveling glides on the feet correct uneven floor surfaces. The solid wood top on this table appears to be a post-market modification.
32” square x 26” High
Condition: Clean solid wood top except for very minor flaws. Original aluminum base has some light wear including scuffs and spots.
We also have a second, nearly identical version of this table. Inquire if you are interested in the mate. Complete your office with Charles Pollock Executive chairs (sold separately) in blue velvet, red or blue fabric. Eames collectors will be happy to know that we have twenty naugahyde stackable Eames shell chairs...
Category
Vintage 1970s American Mid-Century Modern Dining Room Tables
Materials
Metal, Aluminum
Table Basse Par Charles & Ray Eames Pour Herman Miller
By Charles and Ray Eames
Located in Busserolles, FR
Cette table basse, table d’appoint ou coffee table de Charles & Ray Eames a été éditée par Mobilier International dans les années 1960. Elle présente u...
Category
Vintage 1960s French Mid-Century Modern Coffee and Cocktail Tables
Materials
Aluminum
Charles and Ray Eames MCM Round Dining or Conference Table for Herman Miller
By Charles and Ray Eames, Herman Miller
Located in Plainview, NY
A timeless round dining or conference table designed by Ray and Charles Eames for Herman Miller. The table features a laminate top in white with light grey grain design standing on s...
Category
Mid-20th Century American Mid-Century Modern Dining Room Tables
Materials
Aluminum, Stainless Steel
Coffee Table or Side Table from Charles & Ray Eames Herman Miller
By Charles and Ray Eames
Located in Oostrum-Venray, NL
Beautiful & timeless original side table/coffee table by Charles & Ray Eames.
Manufacturer:Herman Miller.
Country of origin: America.
Period:1960.
This coffee table has a bea...
Category
Vintage 1960s American Mid-Century Modern Furniture
Materials
Petrified Wood
More Charles and Ray Eames Designs
Eames Aluminum Group
Average Price
$3,456
Number Available
80
Eames Aluminum Group
Materials
Metal, Aluminum, Animal Skin, Leather, Steel
Styles
Mid Century Modern
Eames Lounge Chair Ottoman
Average Price
$10,577
Number Available
31
Eames Lounge Chair Ottoman
Materials
Wood, Animal Skin, Leather, Metal, Rosewood
Styles
Mid Century Modern
Long before it was the pièce de résistance in a collector’s office or an upscale bachelor pad — landing in ample design magazines, on television and in well-appointed offices over the years — the Eames lounge chair was a fresh, subversive new take on a classic club chair and a culmination of experimentation by its inventive creators.
Charles and Ray Eames (1907–78; 1912–88) met while studying at the Cranbrook Academy of Art, the prestigious Michigan institution that drew such illustrious desi...
Eames Dcm
Average Price
$2,181
Number Available
22
Eames Dcm
Materials
Wood, Metal, Hardwood, Steel, Ash, Plywood
Styles
Mid Century Modern
During World War II, American designers Charles and Ray Eames (1907–78; 1912–88) worked with the United States Navy to make a new leg splint. Recognizing that metal splints could further injure a wounded person through the vibrations of their material, the couple created a new model with molded plywood. That wartime experience propelled the Eameses to continue their explorations in plywood. In 1946, they debuted the DCM, its shortened name referencing the “Dining Height (D) Side Chair (C) on ...
Eames Dax Chair
Average Price
$1,945
Number Available
19
Eames Dax Chair
Materials
Plastic, Fiberglass, Metal, Steel
Styles
Mid Century Modern
The scooped form of the revolutionary single-shell Eames molded fiberglass armchair — of which the Eames DAX chair is a variation — is ubiquitous in interior design today, found everywhere from restaurants to private homes to offices. In 1948, American designers Charles and Ray Eames (1907–78; 1912–88) conceptualized a lounge chair comprising two bonded fiberglass shells as well as a molded fiberglass armchair for the Museum of Modern Art’s International Competition for Low-Cost Furniture Des...