Metal Toys and Dolls

"Kadi" is the name of this rare Chinese themed vintage German made mechanical toy; depicting two turn of the century Chinese men with pigtails walking along, while carrying a large t...

Vintage Mickey/ Minnie Mouse Toy Wind-Up pre-war handcar (train car) circa 1934; by The Lionel Train Company in collaboration with Walt Disney Enterprises. The wind-up toy car featur...

Antique Wind-Up Double Decker open air bus by the Ferdinand Strauss Toy Company, New York; circa 1925; is quite a large and substantial toy resembling very closely, buses of that era...

Vintage Brooke Bond Tea and Coffee Cast Iron Horse and Wagon, Driver included. Please look at all the pictures antique Cast iron coach, horse and wagon in good vintage condition, whe...

Children's Savings Coin Bank "U.S. Mail" bank , also known as a "still bank"; was American made, circa 1920. This is well made, sturdy, and all original. It is made of cast iron and ...

A beautiful pink pig wicker basket container. Made of wicker, paper mache and glass eyes. This was a window display to showcase the smoked sausages. It is from the 1900s - 1910s. Not...

This is a hard to find pre war vintage, Made in America wind up tin toy by The Lindstrom Toy Company of Bridgeport, Connecticut, circa 1928-1932. The action is fabulous; when wound ...

Manufactured circa 1935 by The J. Chein Company in Harrison, New Jersey, this vintage tin toy, when wound up, depicts a young boy in islander garb, trying to ride an alligator who da...

This circa 1930 "George, Drummer Boy" brightly colored lithographed tin wind-up toy capitalizes on the popularity of marching bands, spawned from the military and World War I victory...

Fabulous American vintage all tin wind-up toy with attached key and clockwork mechanism, whereby upon winding it up, the character (Joe Penner) waddles aimlessly across the floor, hat flying in the air with notorious cigar in motion (see attached video with listing). The toy is in wonderful and complete original condition with all original parts and authentic factory paint. It is often found incomplete (cigar or hat missing more often than not); and usually doesn't work properly. My example works great and is in nice bright original paint and lithography, in multiple colors of a black and white checkered suit...

Fabulous condition and in perfect working order on this "Walt Disney Enterprises" copyrighted (labeled---see image) vintage wind-up toy of the iconic Disney character "Pinocchio", da...

Offered is a hard to find Marx floor toy dump truck with dual action. NOT diecast------made of all tin. Capability to raise and lower the bed is activated by rotating the attached a...

Made by J. Chein & Company Circa 1935 in New York City; originally inventoried as #258 (same number as similar looking Popeye toy dated 1932) and was named "Mechanical Clown Barrel Walker". The name of the maker "Chein" is stamped as a logo to the rear of the barrel (see image). This is one of the earlier toys that Chein made. The lithography and hand paint are in gorgeous original condition with bright colors of red and gold to the barrel, flesh tones to the clown, who sports a multi colorful smiling face. The toy works great; simply wind the attached key wind in the back 1/2 revolution; place on the hard surface----the clown waddles across the floor, back and forth, while shaking his head to and fro (see accompanying video with this listing to see it work) In addition to being quite a scarce toy it is even more difficult to find in this fine condition. Often times the head is lacking or replaced from rough usage and surface rarely maintains this beautiful finish. This particular example is completely original with no restorations, repairs, or touch up paint of any kind. There is a small 5/8" superficial indentation to the front top of barrel (see image). This would make a proud addition to any collection of vintage toys or Americana. Dimensions: 7 1/2" high x 3 1/4" wide x 4" deep See my other listings of vintage toys. Provenance: From a recently acquired West Coast collection of fine quality tin toys. Note: After 40 plus years of dealing and collecting toys, I am justly qualified to guarantee and present the authenticity of antique and vintage toys and children's playthings; important considering the fakes and reproductions in the marketplace. My toys operate properly and are as stated and accurately described. it would behoove an enterprising collector, dealer, or decorator to take advantage of the opportunity to buy as many of the vintage...

"Dancing Dog" is a fairly scarce toy to acquire, especially in this excellent condition and working order. Windup toy is lithographed and hand painted in colors of black and greenish grey, and the name "Spot" is printed in bold letters on the red collar. This is American made in the 1920's having been manufactured by the Lindstrom Company of Bridgeport, Connecticut; established in 1913. Markings to each side of the dog reveal its genesis; "The Lindstrom Tool and Toy Co.; Made in U.S.A." "Patent Applied For"; on the other side is "Dancing Dog". "Dancing Dog" is in excellent condition and is completely original with no repairs or repaint. It works perfectly and is quite amusing. To operate; wind up the attached key on the side, a couple of times; with front legs in the air, place down by his hind legs on a hard surface and watch "Spot" dance. He carries on for quite some time, dancing around in a circle and then side to side. (see attached video accompanying the listing). Dimensions: 5 1/4" wide x 4" high x 2 1/4" deep. Provenance: From a recently acquired discerning West Coast Collection of tin toys. See my other listings of vintage toys. Note: After 40 plus years of dealing and collecting toys, I am justly qualified to guarantee and present the authenticity of antique and vintage toys and children's playthings; important considering the fakes and reproductions in the marketplace. My toys operate properly and are as stated and accurately described. it would behoove an enterprising collector, dealer, or decorator to take advantage of the opportunity to buy as many of the vintage tin toys...

"B.O. Plenty (printed on the back) is the name of this American made tin wind-up toy; named after the classic Dick Tracy comic book and radio character of the 1930's. In his hand he is holding his daughter, Baby Sparkle. Markings include the Marx logo to the rear "Made in The United States of America" in logo as well as location of manufacture, "New York, N,Y.". Vertically in small print on back of pants "By Permission of Famous Artists Syndicated Copyright By Chicago Tribune" (see images for markings), Markings on the box contribute to validating the genesis and name of the toy, and 200 fifth Avenue, New York address of the Marx Company, which was founded in 1919. Highly lithographed (comes with the very hard to find nice condition original box as well) this example is in excellent and all original condition with no restoration or touch up of any kind.Colors include; yellow shirt and hat. blue vest, brown striped pants, white and flesh tones to face and baby. The toy features B.O. Plenty with a "wise guy" look on his face, while holding his baby. When wound up he waddles back and forth, with his hat flying up in the air and back down again (see movie attached to this listing). The toy works great! Dimensions: 8 1/2" high x 2 3/4" wide x 2 1/2" deep. Provenance: From a recently acquired West Coast collection of fine quality tin toys. See my other listings of vintage toys. Note: After 40 plus years of dealing and collecting toys, I am justly qualified to guarantee and present the authenticity of antique and vintage toys and children's playthings; important considering the fakes and reproductions in the marketplace. My toys operate properly and are as stated and accurately described. it would behoove an enterprising collector, dealer, or decorator to take advantage of the opportunity to buy as many of the vintage tin toys...

Founded in 1886, the A.C. Williams Toy Company in Ravenna, Ohio, manufactured this toy circa 1930. This cast iron truck car carrier loaded with three blue "Austin" sedans ("Austin" embossed on the side of each car) is completely original with no restoration of any kind, and is in original paint with no touch-up or repaint. I have black lighted everything to insure originality of paint. A red Mack truck hitched to a green trailer pulls the car carrier with it's three original cars; all nickel plated wheels on all vehicles are original. Other markings include #5, #11, and #1 on the inside of each car by rear axle; and #5 on the green trailer; #5 on the red truck. Wonderful piece of Americana in very nice condition; one or several of the cars usually are missing and/or typically repainted due to rough floor play. See my other listings of vintage toys. Dimensions: 12 1/2" long x 2" wide x 4 1/4" high. Each cast iron car...

This rare and exquisite miniature set of 8 antique German Dollhouse Miniatures is a must-have for Dollhouse and Doll collectors and enthusiasts al...

This rare Set of two Pictures framed in Gold plated ormulu frames is a must-have for Dollhouse and Doll collectors and enthusiasts alike. With its beautiful intricate design, it is suitable for any room and adds a touch of elegance to your Dollhouse. You will get 2 Erhard and Söhne Frames and one framed pictures with a landscape to place it in your dollhouse. Made of high-quality gold-plated metal and handmade by skilled craftsmen, this original piece is a testament to the rich history of German toys. Whether you're a fan of entertainment or vintage items, this Erhard & Söhne dollhouse toy...

Lacquered iron rocket France early 20th century Probably part of an old amusement park attraction. wooden stand included 37 cm Conditions: good overall conditions, a bit of rus...

San Francisco trolley toy Friction cable car; made of all tin; important to note because this was the first of it's kind having been made in the 1950s. They were all tin (no plastic); 7 1/4" long (not shorter); green (not red or multi-clored); "Bay and Taylor St" placard; #504" and most importantly the figures are actual FIGURES made of formed pressed steel and then hand painted and lithographed. Cheaper later models were simply lithographed into the flat sheet steel. Also, my example works (see video). It is a friction toy...

This rare and exquisite miniature antique German corner shelf is a must-have for Dollhouse and Doll collectors and enthusiasts alike. With its beau...

All four toys cars are being sold for one price; as a lot. Please see descriptions below. Videos available on request (they display operation). 1) Early Vintage Chein Company All Tin Toy Wind-Up Limousine, American, Circa 1930 This is one of the earlier, New York City based, J. Chein Company, tin toy pieces. They started doing lithography in 1930. This toy wind-up sedan was made circa 1930 and is brightly lithographed and painted in red and yellow, with grey and red balloon wheels. All tin, this car is quite scarce and well proportioned and stream lined with a visor over the windshield, a fancy checkered, red and yellow running board, and three cut out windows to each side of the car; very luxurious and cool looking. Markings consist of "N.J.-44"; the word "Stop" in a logo of some kind; and Chein logo attesting to "Made in U.S.A." manufacture. (see image). Also "marked" and of note are the tires "Chein Balloon Cord" "U.S.A." and "33 x 6 00.6 Ply" Car is from my own collection and is in very good and all original condition with no touch-up paint or repaint, and no restoration of any kind; fabulous colors and presence. The car works fine; see video for operation of the limousine (on request).. Dimensions: 7 1/4" long x 3 1/2" wide x 3" high 2) Rare 911 Porsche Friction Tin Toy by Bandai Toy Co. Made in Japan Circa 1960's Offered here is a whitish/cream colored friction tin toy 911 Porsche circa 1960's, marked at the bottom; "Porsche" in addition to the Bandai Toy Company logo embossed, along with "Made in Japan" designation being noted. The Bandai Toy Company is a post war toy company established in Taito, Japan circa 1950 and is still conducting business today, albeit, it has shifted from toy manufacturing to video toy accessories. This is a very rare toy and is coveted by collectors of both toys and fast cars. Except for the odd and minor scratch here and there, the toy is in very nice, all original condition with absolutely no restoration or touch up to the paint or mechanism (see images). The action and friction functionality works well (see video on request). Motor and engine mechanics and nomenclature are colorfully displayed through the plastic rear trunk window (see image); while the colorful interior can be seen through the side window. Car is all tin, with rubber tires and plastic windows. Dimensions: 10 1/4" long x 4" wide x 3 1/4" high. Note that this toy doesn't become available very often and the few that have turned up in recent years , don't work. 3) Vintage Free Wheeling Green Lithographed All Tin Racing Car. French, Circa 1930 Circa 1930's free wheeling green lithographed all tin racing car, with attached pressed steel driver; it is probably of French manufacturer (the only time I have seen for sale was from a French toy dealer). This scarce toy has markings resembling early racing cars with the streamlined style graphics in yellow and green; standard grill; exhaust four manifolds to each side, and a spare tire attached to the rear; looks like an early Le Mans type car with the spare (see images). Other markings include the number "3:" on each side; "510 x 1" on the rear tire"; and probably the makers mark and logo, which I can't identify, on the top right behind the driver (see images). Not being a wind-up or a friction toy, this racing car was pushed across the floor by hand or/and used as an accessory in a toy train layout setup. The car is in excellent and all original condition (remarkable for a nearly 100 year old floor toy), with no dents, no touch-up paint and absolutely no restoration.. Provenance: From my own collection of toys and banks, having been purchased 33 years ago in 1990. Dimensions: 8 1/4" long x 2 1/2" wide x 2 1/2" high 4) Lehman Auto "Ito" Sedan, Germany, circa 1913 This hand-painted German tin toy was manufactured by the "Lehman Toy Company" in Brandenburg, Germany beginning in 1913. It was made for a number of years after that, enjoying about a 20 year run. Entitled "Ito" it operates by winding up the attached key wind mechanism, placing it on the floor, and watching it go. The car is in very good all original condition with no repairs and no repaint. It runs well. There are a number of markings on the car including "Lehman" with the corresponding logo and the number 679 on the rear. The side of the has the patent information "Pat'd 12 May 1903; 13 Sept. 1904; and U.S.A. 2 Dec. 1913". Hand-painted nicely in red and black with black and gold trim; the hand-painted driver is in blue with flesh tones to the face. Dimensions: 7" long x 3" wide x 3 1/2" high. Note: After 40 plus years of dealing and collecting toys, I am justly qualified to guarantee and present the authenticity of antique and vintage toys and banks; important considering the fakes and reproductions in the marketplace it would behoove an enterprising collector, dealer, or decorator to take advantage of the opportunity to buy as many of the vintage tin...

This rare and exquisite miniature antique German Flower Stand Basket is a must-have for Dollhouse and Doll collectors and enthusiasts alike. With its beautiful intricate design, it is suitable for any room and adds a touch of elegance to your Dollhouse. The set includes also a bouquet of flowers and the stand, all in very good condition. Made of high-quality gold-plated metal and handmade by skilled craftsmen, this original piece is a testament to the rich history of German toys. Whether you're a fan of entertainment or vintage items, this Erhard & Söhne dollhouse toy...

Of American manufacture, by the J. Chein Toy Company in New York City; this early 1930's vintage tin toy depicts a World War I "Doughboy" or American infantryman wearing his back pack and green "fatigues", and when wound up and released on the floor, he walks along (more like waddles along) in a "happy go lucky" manner ------works great! (see attached video). The toy is in excellent and completely all original condition with no restoration and no touch up paint. The lithography and paint is bright and shows little wear except for a couple of superficial scratches on the back (see images). Dimensions: 6" high x 2 3/4" wide x 2 3/4" deep. Provenance: From a recently acquired prominent collection of vintage tin...

Made in Tokyo, Japan by The Haji Company (see image for mark/logo), this all tin vintage wind up toy, circa 1958, depicts a "Monkey Riding A Horse". It ...

Very nice condition all tin, vintage wind up toy by J. Chein Company, New York City, circa 1950, "Boy Skier"; in all original paint and lithography; in ...

A beautiful golden pig candy container or container with secret chamber. Made from white metal, hand painted with cold paint like the bronze Vienna minia...

Perhaps the wildest action of all the Lehman toys, said to resemble Ernest Paul Lehman's temperament (founder of the company), "Balky Mule" was first manufactured in 1897 in Berlin (Brandenburg), and had a multi decade run; this example is from around 1909 (see image with markings to the rear of the carriage). The toy is catalogued as "EPL #425" and documented on page 59 and 60 of the book "Lehman Toys" by Jurgen & Marianne Cieslik, published in 1982. To operate the toy; wind up the attached clockwork key on the underneath of the carriage and place the toy on the floor. Do not over-wind and be gentle, as the toy is aggressive and over 100 years old. The toy will go backwards and forward, and the clown will pop up and down as the cart goes in several different directions across the floor until it winds down (see video accompanying the listing for guidance). The toy is found broken and/or inoperable, more often than not, because of the rough action, and typical abuse by children (after all, it was a toy). This example is in very nice original condition and works well. The lithography and hand paint is bright and original with no touch up or repaint. The hand paint is; flesh tones to the face of the clown, red trousers, orange hair, and grey paint to the seat of the carriage. The clothing to the clown figure is still intact and all original. The lithography to the wheels features brightly colored clowns and a German marking logo. What is really unusual is the fact that the donkey still has all four of its loosely attached original legs, considering the aggressive action of the toy. The metal on the donkey is actually treated with "fabric like" paint, to simulate fur. All in all this is a really cool toy and a "must have" for the collector of tin toys, or someone who simply wants a wonderful example of an early, "turn of the century" iconic wind up toy. Provenance: Recently acquired from a prominent toy collection in Los Angeles, California Dimensions: 7 1/2" long x 3" wide x 5" high Note: After 40 plus years of dealing and collecting toys, I am justly qualified to guarantee and present the authenticity of antique and vintage toys and children's playthings; important considering the fakes and reproductions in the marketplace it would behoove an enterprising collector, dealer, or decorator to take advantage of the opportunity to buy as many of the vintage tin...

Antique toys like this (wind ups) are difficult to find in outstanding operating condition as this one (see the video attached) because of the rough play they would have received from the children who owned them. In very good and all original condition and paint in green, white, yellow, and flesh tone; the paint and lithography has no touch up or repaint of any kind; there is zero restoration. To operate, just turn clockwise the attached clockwork wind up key on the back of the girl and the she dances around in a circular motion for quite some time. "Dancing Katinka" is an all tin wind up toy...

A beautiful collection of golden pig lucky charm figurines. Made from china porcelain. Such items are given away as good luck charms on New Year's Eve. Nice...

Marx "Wonder Cyclist" is the earlier version of this wind-up "Boy on a Tricycle" toy; and not to be confused with the later version by Unique Art called "Kiddy Cyclist". This toy featured is MUCH more rare and more sought after by collectors of early tin wind up toys...

Circa 1930's free wheeling green lithographed all tin racing car, with attached pressed steel driver; it is probably of French manufacturer (the only time I have seen for sale was from a French toy dealer). This scarce toy has markings resembling early racing cars with the streamlined style graphics in yellow and green; standard grill; exhaust four manifolds to each side, and a spare tire attached to the rear; looks like an early Le Mans type car with the spare (see images). Other markings include the number "3:" on each side; "510 x 1" on the rear tire"; and probably the makers mark and logo, which I can't identify, on the top right behind the driver (see images). Not being a wind-up or a friction toy, this racing car was pushed across the floor by hand or/and used as an accessory in a toy train layout...

All tin; circa 1950's four piece doll furniture set, scaled to fit and accommodate all of your 8" or so dolls from that era, e.g. "Muffie, Ginnette, etc". Display your dolls around this ensemble consisting of a clothing wardrobe...

Nine out of these ten banks are of American manufacture, made between the 1950's and the 1970's, while one (the Well's Fargo Stage Coach) was made in China, circa 1990's. Banthrico, Incorporated (Chicago) made four of these banks, while similar type companies made the other six. They manufactured coin savings banks for banking institutions who used them as premiums to those who opened up a savings account. In the case of young children they were given to them to encourage thrift and savings. These (10) banks are a representation of that era 1950 to early 1970's, encompassing enticing savings themes. They were always made of white metal, and typically plated; usually in a copper finish. All of the banks listed below are pictured front, back, and bottom. Four of the banks lack the coin holding trap, which is quite common, as it was typical for children to toss them or lose them eventually upon removing the money from the bank. 1) "Pirate Bank" Circa 1950's; depicts a pirate sitting on top of a treasure chest with a parrot on his shoulder, protecting his booty. Typical original copper finish in white metal; measures 5 1/2" high x 4 1/2" wide x 3 1/2" deep. Copyright marking to the rear "55" , perhaps 1955. Has the coin trap holder but lacks the circular coin trap. Very good condition. Referenced #335 "The Penny Bank Book" by Andy Moore (published 1984)( 2) "Eagle on Cliff" Made by Banthrico Incorporated and dated 1976 (Americana Bicentennial commemoration bank) portrays a proud American eagle perched on a cliff; nice detail to original copper finish with original coin trap in near mint condition. 6 3/8" high. Made for "United Savings Bank" Referenced #145 "Coin Banks by Banthrico" by Jim Redwine (published 2001) 3) "Covered Wagon" Made by Banthrico Incorporated and from the 1950's, by "The Union Banking Company"; depicts a fully loaded chuck wagon with buckets, and a chest ":parked" on western terrain. Finished with copper finish to white metal, with the typical saw tooth coin trap intact, in excellent and all original condition. 4 5/8" long Referenced #432 "Coin Banks by Banthrico" by Jim Redwine (published 2001) 4) "Well's Fargo Stagecoach Bank" Later made promotional bank by Well's Fargo banking institution; in all original and complete condition with original paint colors of red, yellow, and black, authentic looking stagecoach; in very good condition with coin trap intact and no repaint, restoration or dents. 4 3/4" long 5) "Three Little Pigs" Inscribed on front base plate, all original condition with coin trap intact. Slight manufacturing "blow hole" at base of one of the pigs (see image specific to this); unknown manufacture. Made of copper; measures 5" high. 6) "Indian Chief" Put out by "The Multnomah Bank of Portland,m Oregon; depicts an Indian Chief in full feathered head dress and chieftain regalia; with typical Banthrico Company original copper finish and Banthrico original coin trap to the base. Measures 5" high. Circa 1962 Referenced #27 "Coin Banks by Banthrico" by Jim Redwine (published 2001) 7) "Shoe House" Bank Mistakenly called "Old Lady and the Shoe Bank"; this particular bank is of unknown manufacture (could be early Banthrico bank...

Highly colorful and completely operational hard to find LARGE tin child's toy spinning top made by the J. Chein Company, Harrison, New Jersey, Circa 1950. It works great and is in co...

A beautiful Children Toy sewing machine. Made of metal. Was made in the years right after WWII and is marked "Made Germany, British Zone". Made by C...

By J. Chein, circa 1930, this tin lithographed and hand painted American tin wind-up toy is all original and in working order. There are a few scratches here and there (from normal play and use); but for a nearly 100 year old toy, it is in very good and all original paint with no touch up or restoration. The turtle is painted in colors of yellow (predominantly) with a turquoise border and red dots, and an orange neck; while the boy is dressed in yellow. The action of the toy portrays a boy riding a turtle; and upon winding up the attached clockwork key and releasing on the floor, the turtle with boy rider, ride away! The turtle moves his head up and down while the boy rocks up and down, as the turtle moves across the floor (see attached 12 second video of operation). Works well (unique for this toy) but occasionally "sticks". Of American manufacturer (marked on the left of center of the shell of the turtle), the J. Chein Company was in Harrison, New Jersey, and one of the premier toy makers of the 1930's. Dimensions: 8" long x 4 1/2" wide x 4" high Note: After 40 plus years of dealing and collecting toys, I am justly qualified to guarantee and present the authenticity of antique and vintage toys...

Very difficult antique toy to come by, especially to find with the original box, as this example. In excellent and all original condition and paint in bright blue, white, and yellow paint and lithography with no touch up; there is zero restoration, and the toy is in outstanding operating condition; just wind up the attached wind up key on the back of the boy and the he dances around in a circular motion for quite some time while seemingly playing his accordion (see the video attached). "Dancing Dutch Boy" is an all tin wind up toy...

This brightly lithographed tin wind-up toy in colors of red, yellow, and blue, with a driver dressed in appropriate motorcycle clothing, depicts a young man driving a delivery cart with "Speed Boy Delivery" printed on each side of the wagon. The manufacturers logo is clearly marked on both sides of the stake wagon and on the right shoulder of the driver "MAR" with a circle around it and "Made in The United States of America, New York, N.Y." around the circumference (see images). The license plate number is "268", which, along with the red painted inside of the drivers arms (as it should be!) indicates this earlier version and authenticity. Nearly 100 years old, it still operates fine and, upon winding the attached wind-up key a few times and placing the toy on the ground, the motorcycle and driver move across the floor on the way to their deliveries; do not over wind. (see video attached to this listing). The toy is completely original and in very good condition, with no repairs or restorations of any kind and no touch up or repaint. The arms and steering handle bars are also original (sometimes replaced) and they have the appropriate paint and markings. This would make a welcome addition to a collection of pre-war Americana. Dimensions: 9 7/8" long x 5 7/8" wide x 5 3/4" high After 40 plus years of dealing and collecting toys, I am justly qualified to guarantee and present the authenticity of antique and vintage toys...

This is one of the earlier, New York City based, J. Chein Company, tin toy pieces. They started doing lithography in 1930. This toy wind-up sedan was made circa 1930 and is brightly ...

This is the more rare and desirable variation of this toy, with the dog riding "shotgun", sitting on the running board of the auto. The tin lithographed and hand painted wind-up toy by the Louis Marx Company of New York City, circa 1930, was undoubtedly influenced by Mack Sennett's Keystone Kops series featured in silent films. The toy portrays a New York City policeman, seated behind the steering wheel of a car with his dog by his side on the running board; driving erratically; forward and backwards, left and right; doing "popping wheelies", while spinning his head around in utter confusion attempting to negotiate traffic. The toy works great; just as it did when new, (see the attached 40 second movie with the listing). Simply wind up the fixed clockwork key in place a few times (do not over-wind) and watch the action described above. This "Komikal Kop...

A unique and quite scarce bank, made in Japan by the Marusan Company for the American market in the 1950's; this all tin bank is known as (according to the gr...

Offered here is a whitish/cream colored friction tin toy 911 Porsche circa 1960's, marked at the bottom; "Porsche" in addition to the Bandai Toy Company logo embossed, along with "Made in Japan" designation being noted. The Bandai Toy Company is a post war toy company established in Taito, Japan circa 1950 and is still conducting business today, albeit, it has shifted from toy manufacturing to video toy accessories. This is a very rare toy and is coveted by collectors of both toys and fast cars. Except for the odd and minor scratch here and there, the toy is in very nice, all original condition with absolutely no restoration or touch up to the paint or mechanism (see images). The action and friction functionality works well (see video). Motor and engine mechanics and nomenclature are colorfully displayed through the plastic rear trunk window (see image); while the colorful interior can be seen through the side window. Car is all tin, with rubber tires and plastic windows. Dimensions: 10 1/4" long x 4" wide x 3 1/4" high. Priced competitively; note that this toy doesn't become available very often and the few that have turned up in recent years , don't work and are several hundred dollars more than mine. Note: After 40 plus years of dealing and collecting toys, I am justly qualified to guarantee and present the authenticity of antique and vintage toys; important considering fakes and reproductions in the marketplace it would behoove an enterprising collector, dealer, or decorator to take advantage of the opportunity to buy as many of the vintage tin...

This 1940's "Drummer Boy" brightly colored lithographed tin wind-up toy capitalizes on the popularity of marching bands, spawned from World War II and the preponderance of patriotism...

Here I have to offer a fine antique classic early 20th century selection of House Altar Christianity miniatures and accessories. A wonderful decorative appeal! Each was made in Germa...

Diminutive late 1940s "penny toy like" wind-up tin toy platform train modern and sleek looking for that era; it is hand painted and lithographed in bright co...

This beautiful Bisque Head doll, with a smaller baby doll, is seated in a metal sled. The doll has brown glass eyes, blonde hair and teeth. The coat is made of pressed cotton. The sl...

Antique American primitive handmade gliding rocking hobby horse Additional information: Materials: Iron, Leather, Wood Color: Antique White Period: 19th Century Styles: Ameri...

This is a wonderful depiction of Krampus or the devil puppet. The item is approximately 32 inches tall and has a skeleton, arms and legs made of wood. Height was measured from foot t...

This is a later (1950's), albeit often overlooked and important mechanical bank that is quite rare, and highly sought after by collectors. Iconic bank collector F.H. Griffith wrote a...

Antique Victorian wooden children’s sled with iron wrapped runners, painted dark red with the word “Belle” picked out in gold.

This mariner compass marble game board is in amazing condition and is all completely original. It has the original label on the reverse and was manufactured in Bridgeport, Conn. and ...

Early 20th century scratch-built tricycle model. A charming example of an English scratch built folk art child’s tricycle model. Constructed from a metal frame, wooden wheels, han...

Vintage folk art toy or child's Christmas sleigh/ sled / toboggan. Made of slatted wood with scrolled iron accents featuring cut out Christmas trees. ...

This rare pre- WW II German made tin toy is seldom seen. Lloyd, Harold (Clayton) (1893–1971), U.S. movie comedian. Performing his own hair-raising stunts, ...

"Cat With A Bow Seated" cast iron still bank is a re-issue of a bank by the same name and same casting made in the early 1900s by the Grey Iron C...

Original "Billiken" cast iron still bank patented in 1908 by Florence Pretz (patent number on the back in raised letters "NO39BO3". It was manufa...

For the mechanical bank and toy enthusiast, listed is a tin, lithographed and painted, all original 1960s mechanical bank made by the Yone Company of Japan (see image of logo on side panel). The company was founded in 1950 and is typical of the post war companies who produced outstanding children's toys. The action is unique, clever, and encourages saving money. With the bank wound (attached key wind on the underneath (see image); place a penny on the spot provided on top of the bank. The mouse dashes out of the grey shoe...