Rare Verner Panton plywood S chair, model 275, 1956, completely original, Thonet
View Similar Items
Rare Verner Panton plywood S chair, model 275, 1956, completely original, Thonet
About the Item
- Creator:Verner Panton (Designer),Thonet (Manufacturer)
- Dimensions:Height: 31.89 in (81 cm)Width: 17.13 in (43.5 cm)Depth: 21.66 in (55 cm)Seat Height: 19.69 in (50 cm)
- Style:Scandinavian Modern (Of the Period)
- Materials and Techniques:Plywood,Woodwork
- Place of Origin:
- Period:
- Date of Manufacture:1956
- Condition:Wear consistent with age and use.
- Seller Location:Wargrave, GB
- Reference Number:Seller: Panton S chair1stDibs: LU839532845462
Verner Panton
Verner Panton introduced the word “groovy” — or at least its Danish equivalent — into the Scandinavian modern design lexicon. He developed fantastical, futuristic forms and embraced bright colors and new materials such as plastic, fabric-covered polyurethane foam and steel-wire framing. And Panton’s ebullient Pop art sensibility made him an international design star of the 1960s and ’70s. This radical departure from classic Danish modernism, however, actually stemmed from his training under the greats of that design style.
Born on the largely rural Danish island of Funen, Panton studied architecture and engineering at Copenhagen’s Royal Danish Academy of Fine Arts, where the lighting designer Poul Henningsen was one of his teachers. After graduating, in 1951, Panton worked in the architectural office of Arne Jacobsen, and he became a close friend of Hans Wegner's.
Henningsen taught a scientific approach to design; Jacobsen was forever researching new materials; and Wegner, the leader in modern furniture design using traditional woodworking and joinery, encouraged experimental form. Panton opened his own design office in 1955, issuing tubular steel chairs with woven seating. His iconoclastic aesthetic was announced with his 1958 Cone chair, modified a year later as the Heart Cone chair. Made of upholstered sheet metal and with a conical base in place of legs, the design shocked visitors to a Copenhagen furniture fair.
Panton went on to successive bravura technical feats. His curving, stackable 1960 Panton chair, his most popular design, was the first chair to be made from a single piece of molded plastic. Three years later, he introduced the S model, the first legless chair crafted from a single piece of plywood, cantilevered on a round metal base. Panton would spend the latter 1960s and early ’70s developing all-encompassing room environments composed of sinuous and fluid-formed modular seating made of foam and metal wire. He also created a series of remarkable lighting designs, most notably his Fun chandeliers — introduced in 1964 and composed of scores of shimmering capiz-shell disks — and the Space Age VP Globe pendant light of 1969.
As you will see from the offerings on 1stDibs, Verner Panton’s designs are made to stand out and put an eye-catching exclamation point on even the most modern decor.
- Finn Juhl, Pair of Teak Easy Chairs, Model Fd138, France & Son, 1959By Finn Juhl, France & SønLocated in Wargrave, BerkshirePair of Easy Chairs by Finn Juhl, model FD138 in teak, produced by France & Son, Denmark, circa 1959 One chair has France & Son label to back stretcher Reupholstered in ochre a...Category
Vintage 1950s Danish Scandinavian Modern Chairs
MaterialsUpholstery, Teak
- Ettore Sottsass, Dado Stool, model T29, completely original 1960s exampleBy Ettore Sottsass, PoltronovaLocated in Wargrave, BerkshireEttore Sottsass, Dado Stool, model T29, designed 1963 and manufactured by Poltronova, Italy during the 1960s. The wooden base is painted in brick red paint with a plain walnut top. ...Category
Vintage 1960s Italian Mid-Century Modern Stools
MaterialsWood, Walnut
- Jean Prouvé, Pair of Standard Chairs, model 306, circa 1950By Jean ProuvéLocated in Wargrave, BerkshirePair of original "semi-metal" Standard chairs, model 306, designed by Jean Prouvé, and dating from around 1950. Constructed from plywood with the original ribbed vinyl covering and...Category
Vintage 1950s French Mid-Century Modern Chairs
MaterialsMetal, Enamel
- Alvar Aalto, Birch Plywood Cantilever Chair, Model 31, Huonekalu-ja, FinlandBy Huonekalu-Ja Rakennustyötedas Oy, Alvar AaltoLocated in Wargrave, BerkshireAlvar Aalto model 31 chair of moulded birch plywood, cantilevered one-piece seat and back suspended from bent supports painted black. Designed in the 1930s and produced by Huonekalu...Category
Vintage 1950s Finnish Scandinavian Modern Lounge Chairs
MaterialsBirch, Plywood
- Gio Ponti for Cassina, Harlequin Set of Leggera Chairs, Model 646 in Ash, 1950sBy Gio Ponti, CassinaLocated in Wargrave, BerkshireGio Ponti for Cassina, Harlequin Set of Four Leggera Chairs, Model 646, 1950s Ash frames, recently re-upholstered in Kvadrat fabric in yellow, green, red and orange. Good condition...Category
Vintage 1950s Italian Mid-Century Modern Chairs
MaterialsUpholstery, Ash
- Hans J Wegner, Valet Chair, Model JH540 in Teak and Oak, Designed 1953, StampedBy Hans J. Wegner, Johannes HansenLocated in Wargrave, BerkshireHans J Wegner (1914-2007), Valet Chair, model no. JH540, teak and oak, original edition produced by Johannes Hansen, 1953. Underside impressed with manufacturer’s mark: JOHANNES ...Category
Vintage 1950s Danish Mid-Century Modern Chairs
MaterialsOak, Teak
- Non-Serial Model 275 S-Chair by Verner Panton in Bent Fineer, Denmark, 1956By Verner PantonLocated in Hellouw, NLThis extraordinarily impressive chair was designed by Danish designer Verner Panton in 1956, only to see the light of day ten years later. The technology to put this chair into production was simply not sufficient at the time. Gerrit Rietveld had tried much earlier in 1932 to manufacture his Zig-Zag chair from one piece of Material. German author and expert on Panton's oeuvre, Mathias Remele, notes that the IDEA may have originated after Panton's collaboration with August Sommer. A German company specialized in curved laminated wood that produced its Barboy in 1963. The Thonet brothers finally took up the Challenge and produced two versions of this chair. Model 275 and 276 respectively with a round backrest. This specific chair is a non-serial production and has a marvellous provenance. It was used for the pavilion for wooden constructions at the 'Debau exhibition fair in Essen' in the sixties/seventies. The chair consists of fourteen layers of glued, bent and pressed rounded veneer...Category
Vintage 1950s Danish Scandinavian Modern Chairs
MaterialsWood
- S-Chair No. 275 in Red by Verner Panton, 1956By Verner PantonLocated in New York, NYVerner Panton. S-chair, model 275. Designed 1956, this example manufactured ca. 1965. Manufactured by A. Sommer, Germany. Retailed by Thonet, Frankenberg, Germany. Aniline-dyed beech...Category
Vintage 1960s German Modern Side Chairs
MaterialsPlywood
Price Upon Request - Verner Panton C1 ChairsBy Verner PantonLocated in Dronten, NLIconic red C1 armchair designed by Verner Panton and manufactured by Vitra. On swivel bearings and slightly tilted, the upholstered seat shell is comfortable - both for relaxed sitti...Category
21st Century and Contemporary Danish Scandinavian Modern Chairs
MaterialsStainless Steel
$595 / item - 1970, Verner Panton, 1-2-3 Serie Office Chair, Original Panton Fabric by KvadratBy Verner Panton, RosenthalLocated in Amsterdam IJMuiden, NLThis item is part of the private collection of Casey Godrie and is situated in his private house. Ask him for competitive shipping quotes. His incredible Dune Villa, Amsterdam Beach,...Category
Vintage 1970s Danish Scandinavian Modern Chairs
MaterialsMetal, Chrome
- Verner Panton "Panton Chair" 6 Original Chairs Edition Herman Miller circa 1960By Herman Miller, Verner PantonLocated in Saint-Ouen, FRVerner Panton "Panton chair" 6 original chairs edition Herman Miller in enamelled fiberglass circa 1960 repainted a few years ago. original color: white wear and minor losses.Category
Vintage 1960s North American Mid-Century Modern Chairs
MaterialsFiberglass
- Cone Chair by Verner PantonBy Verner Panton, Fritz HansenLocated in Hudson, NYOriginal condition, iconic swiveling cone shaped chair with four steel feet and black glides. Made by Fritz Hansen. Original vinyl upholstery.Category
Vintage 1950s Danish Scandinavian Modern Chairs
MaterialsSteel
Recently Viewed
View AllRead More
113 Chairs That Prove Danish Design Isn’t Limited to Denmark
In an innovative display, the Designmuseum Danmark is permanently exhibiting the 20th century's most iconic seats.
Verner Panton’s Bold Designs From the 1960s and ’70s Are Showing Up Everywhere
From high-fashion runways to a brand-new book, the groovy, futurist work of this groundbreaking Danish creative is receiving newfound — and much deserved — attention.