Set of Three Original Cherner Mid-Century Modern Dining or Side Chairs, 1960s
View Similar Items
Set of Three Original Cherner Mid-Century Modern Dining or Side Chairs, 1960s
About the Item
- Creator:Norman Cherner (Designer),Plycraft (Manufacturer)
- Dimensions:Height: 31.25 in (79.38 cm)Width: 16.75 in (42.55 cm)Depth: 19 in (48.26 cm)Seat Height: 17.5 in (44.45 cm)
- Sold As:Set of 3
- Style:Mid-Century Modern (Of the Period)
- Materials and Techniques:Walnut,Laminated
- Place of Origin:
- Period:
- Date of Manufacture:circa 1960s
- Condition:Wear consistent with age and use. Very good vintage condition, some light wear. Small repair to chip on the front of one seat.
- Seller Location:Chesterfield, NJ
- Reference Number:1stDibs: LU2670314047502
Norman Cherner
Norman Cherner was an influential designer who explored postwar technological innovations and how to incorporate them into furniture production and architecture. And while its history is complicated, his Cherner chair is one of the most successful examples of mid-century modern molded plywood seating.
Born in New York City, Cherner was an architect and a prolific designer who taught at Columbia University’s Teachers College. An enthusiast of the Bauhaus, he gave lectures in the late 1940s on the principles of the legendary German design school at the Museum of Modern Art.
Cherner was fascinated with the concept of cost-efficient design, and this extended into his pioneering ideas for prefabricated housing. His philosophy was that a modular home should be a complete design concept that included economical furniture and lighting. He published several DIY books, such as How to Build a House for $6,000. Cherner caught the interest of a housing cooperative in upstate New York and was contracted to design and oversee the construction of prefabricated housing in the town of Ramapo. The U.S. Department of Housing assembled a pre-built Cherner home for exhibition in Vienna.
But he is best known for his chair.
In the 1950s, one of George Nelson’s designers, John F. Pile, created the Pretzel chair. It had structural problems and proved too costly to make at Herman Miller, where Nelson was director of design. Production was subcontracted to Massachusetts company Plycraft, but the agreement didn’t last long owing to a dispute between the furniture manufacturers. Based on a recommendation from Nelson, Plycraft sought out Cherner to redesign the chair so that it would be durable and affordable to produce.
Cherner submitted his redesign only to be told that Plycraft had shelved the project. However, Plycraft secretly began producing what would become the Cherner chair under a different name — and Cherner later stumbled across his seat in New York. Cherner sued Plycraft and won. The chair became instantly popular after being featured in a Norman Rockwell illustration for a Saturday Evening Post cover in September of 1961.
Other noteworthy Cherner designs include his Konwiser furniture line, Multiflex storage units and tube lighting. The Museum of Modern Art praised his Konwiser collection as “some of the most progressive furniture designs available to the American public.”
In 1972, Plycraft discontinued production of his chair, and Cherner died in 1987. In 1999, his two sons founded the Cherner Chair Company and began making furniture based on their father's original designs for armchairs, chairs — including the Cherner chair — tables and credenzas.
Find vintage Norman Cherner furniture on 1stDibs today.
Plycraft
While the history of Plycraft is marred by scandal and lawsuits, the American furniture manufacturer produced charming lounge chairs and other seating during the mid-century modern era that are sought after by collectors today.
Paul Goldman founded Plycraft in Lawrence, Massachusetts, in 1953 — he had secured military contracts for the manufacturing of bentwood products during World War II and was able to move into the commercial market thereafter. While Plycraft counted fiberglass boats among its early offerings, its primary focus switched to furniture when what we now call mid-century modernism hit its stride and more designers began to explore the possibilities of bentwood furniture thanks to the revolutionary work of Alvar Aalto and Michael Thonet. Goldman was Plycraft’s principal designer, but George Mulhauser and Norman Cherner were also enlisted to create furniture for the brand.
In 1952, a designer named John F. Pile, who was working in the studio of Herman Miller design director George Nelson, conceived what he called the Pretzel chair in walnut and birch. Pile’s seat, which was inspired by European modernist design, proved too costly to manufacture and it had structural problems. So the illustrious Michigan furniture maker subcontracted Plycraft to produce the Pretzel chair — an agreement that was short-lived owing to a dispute between Plycraft and Herman Miller.
Goldman subsequently tapped Norman Cherner — an innovative architect, designer and professor at Columbia University who was recommended by Nelson — to create an iteration of the Pretzel chair that would be stronger and cost-efficient to manufacture.
Cherner submitted a comfortable, curvaceous update to the Pretzel chair in molded plywood but was told by Plycraft that the project was being scrapped and his drawings shelved. Months later, Cherner was shocked to stumble upon his redesigned chair in a furniture showroom in New York under the Plycraft name. Cherner sued Plycraft and won — the Cherner chair later appeared in a Norman Rockwell painting on the cover of The Saturday Evening Post.
In the late 1950s, designer George Mulhauser created the Mr. Chair for Plycraft, an adjustable, tilting, swivel armchair with a matching ottoman. Mulhauser was also a designer in George Nelson’s studio and is credited with having conceived the iconic Coconut lounge chair for Herman Miller. With its tufted leather seat and shell crafted from a single sheet of plywood, the Mr. Chair lounge — part of a line of seating for which Mulhauser was commissioned — bears a resemblance to the now-legendary Eames lounge chair, which was designed by Ray and Charles Eames for Herman Miller. Mulhauser’s chair was very successful for Plycraft. A model was even spotted on an episode of Star Trek.
- Early Set of Four Harry Bertoia Molded Shell Side Chairs for Knoll, LabeledBy Harry Bertoia, KnollLocated in Chesterfield, NJSet of four molded shell side chairs designed by Harry Bertoia and manufactured by Knoll. Originally debuted in 1960, this very early set is from 1963 and...Category
Vintage 1960s American Mid-Century Modern Side Chairs
MaterialsMetal
$3,000 Sale Price / set33% Off - Ilmari Tapiovaara Set of 3 Stacking Rare Wilman Chairs Scandinavian ModernBy Ilmari TapiovaaraLocated in Chesterfield, NJSet of 3 rare stackable Wilman chairs designed in 1956 by renowned Finnish designer, Ilmari Tapiovaara, and manufactured in Finland by Wilhelm Schauman Fanerfabrik. These innovative...Category
Vintage 1960s Finnish Scandinavian Modern Dining Room Chairs
MaterialsWood, Paint
- Midcentury Danish Modern Bentwood Dining, Side or Desk ChairLocated in Chesterfield, NJMidcentury Danish modern bentwood chair with metal legs. Lightweight and strong with beautiful wood grain. Made in Denmark stamped underneath.Category
Vintage 1960s Danish Scandinavian Modern Office Chairs and Desk Chairs
MaterialsWood
- Saarinen for Knoll Mid-Century Modern Oak Tulip Pedestal Side TableBy Eero Saarinen, KnollLocated in Chesterfield, NJClassic tulip side table designed by Eero Saarinen and manufactured by Knoll. This table has a 20 inch diameter oak top, a white pedestal base, and was made in 1978. Knoll label unde...Category
Vintage 1970s American Mid-Century Modern End Tables
MaterialsAluminum
- Pair George Kovacs Mid-Century Modern Chrome and Travertine Desk or Table LampsLocated in Chesterfield, NJBeautiful pair of minimalist styled desk or table lamps manufactured by George Kovacs. These lamps have a cantilevered chrome body with quarter-round travertine stone accents. The la...Category
Vintage 1970s American Mid-Century Modern Table Lamps
MaterialsTravertine, Chrome
- Koret Mid-Century Modern Black Patent Leather and Brass Handbag or Shoulder BagBy KoretLocated in Chesterfield, NJStylish black patent leather adjustable handbag made by high end manufacturer, Koret. This bag has a fold over flap with an unusual brass U-shaped twist clasp closure. The interior i...Category
Vintage 1960s American Mid-Century Modern Decorative Boxes
MaterialsBrass
- Mid Century Modern Set of 6 Original Norman Cherner Dining Chairs for PlycraftBy Plycraft, Norman ChernerLocated in Port Jervis, NYFabulous original set of six Norman Cherner Dining chairs for Plycraft c1955. Totally restored, wood was scrubbed clean and restrained and lacquered. All new upholstery, faux black l...Category
Vintage 1950s American Mid-Century Modern Dining Room Chairs
MaterialsFaux Leather, Walnut
- Set of Norman Cherner Pretzel Dining Chairs, Made by Plycraft, USA, 1960sBy Plycraft, Norman ChernerLocated in London, GBA set of four original Norman Cherner pretzel dining chairs, made by Plycraft, USA, in the 1960s. Bentwood frames. Priced for the s...Category
Mid-20th Century American Mid-Century Modern Dining Room Chairs
MaterialsWood
- Norman Cherner Pretzel Dining Side Arm Chair Made by Plycraft 1960'sBy Plycraft, Norman ChernerLocated in Wayne, NJNorman Cherner pretzel dining chairs, made by Plycraft in the 1960's. If you are in the New Jersey , New York City Metro Area , ple...Category
Vintage 1960s American Mid-Century Modern Dining Room Chairs
MaterialsWood
$2,000 Sale Price20% Off - Set of 6 Norman Cherner Dining Chairs, Made by Plycraft, USA, 1963. 2 Arm ChairsBy Norman Cherner, PlycraftLocated in Buffalo, NYA set of six original Norman Cherner dining chairs, made by Plycraft, USA in the 1960s. Bentwood frames, original patent leatherl seats / backs Plycraft labels to the undersides. Th...Category
Vintage 1960s American Mid-Century Modern Dining Room Chairs
MaterialsPatent Leather, Walnut, Plywood
- Iconic Mid Century Cherner Plycraft Bent Ply ChairBy Norman Cherner, PlycraftLocated in New York, NYIconic Mid Century bent plywood chair designed by Norman Cherner for Plycraft with original Plycraft label, dated 1964. This example is...Category
Vintage 1960s American Mid-Century Modern Dining Room Chairs
MaterialsUpholstery, Plywood
- Rare Set of Six (6) Bentwood Dining w/ Metal Bases Chairs by Norman ChernerBy Norman Cherner, PlycraftLocated in Deland, FLAs rare as they are visually stunning this extraordinary set of chairs, first designed by the iconic Norman Cherner in 1958, has recently undergone a comprehensive and transformative restoration offering a modern twist to the classic design. Considered a pioneer in molded plywood, Norman Cherner used this method to create a line of seating for Plycraft that led to his famous "Cherner Chair." This model chair is found in design collections throughout the world, including the Vitra Design Museum and the Cherner Chair is still regarded as one of the most dramatic designs utilizing the technology of molding plywood. The Cherner side chair utilizes a molded plywood seat with a unique construction of laminated walnut plywood in graduated thickness. The seats and backs are designed using a single shell connected by a slim and sturdy neck upholstered in new black vinyl nearly identical to the original material all set atop a set of slender, powder-coated metal legs. Stamped "October 31st, 1963" and retaining the original Plycraft tags these one of a kind dining chairs...Category
Vintage 1960s American Mid-Century Modern Dining Room Chairs
MaterialsWalnut