Skip to main content
Want more images or videos?
Request additional images or videos from the seller
1 of 9

Coffee Table Designed by J. Wade Beam for Brueton, circa 1970

About the Item

'SMT Table' by Brueton has a 1/2 inch reverse bevel, tempered glass top that is 48 inches square. The base is 1” thick stainless steel panels truncated inward at a 45° angle to form a L-shaped base; welded, ground and polished into a seamless unit. The polished steel base is angled 45 degrees so that the glass top is counterbalanced. There are no screws, nail or hinges; the glass slides into one corner of the base. The table was purchased from Brueton in the late 1970s by its only owner.
  • Creator:
    Brueton (Manufacturer)
  • Dimensions:
    Height: 14 in (35.56 cm)Width: 48.5 in (123.19 cm)Depth: 48.5 in (123.19 cm)
  • Style:
    Mid-Century Modern (Of the Period)
  • Materials and Techniques:
    Glass,Steel,Polished,Tempered
  • Place of Origin:
  • Period:
  • Date of Manufacture:
    1978
  • Condition:
    Wear consistent with age and use.
  • Seller Location:
    Jersey City, NJ
  • Reference Number:
    1stDibs: LU8073956958
More From This SellerView All
  • Two Coffee Tables by Pace, circa 1970 Made in USA
    By Pace Collection
    Located in Jersey City, NJ
    Coffee tables with round glass tops supported by three 3/4 inch thick pieces of arched glass joined with solid brass hardware. Both tops have pencil point edges and are ale 3...
    Category

    Vintage 1970s American Mid-Century Modern Coffee and Cocktail Tables

  • Coffee Table Designed by Henry Robert Kann for Knoll in 1953 Made in USA
    By Knoll
    Located in Jersey City, NJ
    Coffee table with a rectangular wood top that has 13 strips of solid maple set together and joined in three places by a round peg that runs through each piece to form a solid wood to...
    Category

    Vintage 1950s American Mid-Century Modern Coffee and Cocktail Tables

    Materials

    Metal

  • Steel Coffee Table with a Travertine Top circa 1970, made in France
    Located in Jersey City, NJ
    Coffee table has a nickel-plated solid steel base, each leg with linearly cut corners that form a T, and an inset finished travertine top with curved edges.
    Category

    Vintage 1970s French Mid-Century Modern Coffee and Cocktail Tables

    Materials

    Travertine, Steel

  • Coffee Table designed by Donald Drumm, USA C. 1985
    By Donald Drumm
    Located in Jersey City, NJ
    Coffee table has a tubular metal base that supports a decorative cast aluminium design with a grey paint finish below a round glass top.
    Category

    Late 20th Century American Modern Coffee and Cocktail Tables

    Materials

    Glass

  • Coffee Table Signed Matteograssi Italy Circa 1960
    By Matteo Grassi
    Located in Jersey City, NJ
    Table has black leather over steel frame that supports a, 3/4 inch thick, glass top that rests just a bit lower than the sides. 'Matteograssi is stamped into the leather of one leg.
    Category

    Vintage 1960s Italian Mid-Century Modern Coffee and Cocktail Tables

  • Coffee Table by Richard Troy for Art & Industry Soho NYC, 1980
    By Richard Troy
    Located in Jersey City, NJ
    Coffee table with four T-shaped, solid steel legs and a clear safety glass top.
    Category

    Late 20th Century American Mid-Century Modern Coffee and Cocktail Tables

    Materials

    Steel

You May Also Like
  • 1970s Triform Cantilevered Coffee Table by J. Wade Beam for Brueton
    By J. Wade Beam, Brueton
    Located in Philadelphia, PA
    This is a Triform Cantilevered Coffee Table, designed by J. Wade Beam in 1970 for Breuton. It is formed of a satin stainless steel triangular base with pencil edges throughout, and a...
    Category

    Vintage 1970s American Modern Coffee and Cocktail Tables

    Materials

    Stainless Steel

  • Wade Beam for Brueton Cantilevered " Zephyr" Cocktail Table
    By J. Wade Beam, Brueton
    Located in Peabody, MA
    Cantilivered zephyr coffee table by J. Wade Beam for Brueton in white lacquered finish circa 1970s. Measures: Height to glass, 14 7/8". Height t...
    Category

    Vintage 1970s American Mid-Century Modern Coffee and Cocktail Tables

    Materials

    Glass, Wood

  • Mid-Century Cantilevered Chrome & Glass Coffee Table by J. Wade Beam for Brueton
    By J. Wade Beam, Brueton
    Located in New York, NY
    This dynamic Mid-Century Modernist Angular and Cantilevered Chrome and Glass Cocktail Table is made by the designer J. Wade Beam for Brueton. Founded in 1926, Brueton has been known ...
    Category

    Vintage 1970s American Mid-Century Modern Coffee and Cocktail Tables

    Materials

    Chrome

  • Modern Hoop Cantilevered Low Cocktail Coffee Table by J. Wade Beam for Brueton
    By Brueton, J. Wade Beam
    Located in Topeka, KS
    Stunning 21st Century Hoop cantilevered low cocktail or coffee table by J. Wade Beam for Brueton. Comprised of a cylindrical stainless-steel base with an ivory colored marble inset a...
    Category

    Late 20th Century American Modern Coffee and Cocktail Tables

    Materials

    Concrete, Marble, Stainless Steel

  • Vintage J. Wade Beam for Brueton Chrome and Smoke Glass Square Coffee Table
    By Brueton
    Located in Palm Desert, CA
    Vintage 1970s J. Wade Beam for brueton chrome & smoke glass coffee table. The table is made out of chrome. The smoke glass slides into the chrome fra...
    Category

    Vintage 1970s American Mid-Century Modern Coffee and Cocktail Tables

    Materials

    Chrome

  • Cantilevered Glass White " Zephyr" Cocktail Table by Wade Beam for Brueton
    By J. Wade Beam, Brueton
    Located in Chicago, IL
    Oval glass set into a lacquered angled Wood base. Designed by J. Wade Beam for Brueton.
    Category

    Late 20th Century American Mid-Century Modern Coffee and Cocktail Tables

    Materials

    Glass

Recently Viewed

View All