Pair of White Harry Bertoia "Diamond Chairs" Produced by Knoll, 1950s
About the Item
- Creator:Harry Bertoia (Designer)
- Design:
- Dimensions:Height: 29.53 in (75 cm)Width: 33.08 in (84 cm)Depth: 29.53 in (75 cm)Seat Height: 15.36 in (39 cm)
- Sold As:Set of 2
- Style:Mid-Century Modern (Of the Period)
- Materials and Techniques:Metal,Welded
- Place of Origin:
- Period:
- Date of Manufacture:1950s
- Condition:Wear consistent with age and use.
- Seller Location:Stockholm, SE
- Reference Number:1stDibs: LU5488227926642
Diamond Chair
To fully understand the design of Harry Bertoia’s (1915–78) 1952 Diamond chair — an austere and photogenic work of woven steel wire, the intricately sculptural wings of which create the illusion of sitting on air — it helps to go back to his college days: In 1937, the Italian-born artist and designer, who emigrated to Detroit at age 15, earned a scholarship to Cranbrook Academy of Art, the illustrious Michigan design school that attracted such luminaries as Florence Knoll, Eero Saarinen and Charles and Ray Eames. Bertoia was deeply influenced by the Eameses, especially by the sculptural quality that was so prominent in the furniture they made. In the 1940s, he left Cranbrook to work for the couple, developing the molded plywood furniture that would become a trademark of their designs.
Bertoia learned to weld while employed by the Eameses, but left their workshop in anger over the lack of credit he received for the important contributions he made there — a dispute that would come to play an important role in the Diamond chair’s development. He eventually took a job at an electronics lab, where he analyzed human mobility for the purpose of designing electronics with easy-to-reach knobs and consoles.
When his former Cranbrook classmate Florence Knoll tapped Bertoia to make furniture for the Pennsylvania company she had recently founded with her husband, Hans, the designer was swayed with the promise of full credit for designs he produced. Armed with a newly minted background in ergonomics as well as the knowledge he gathered from experimentation with the Eameses, Bertoia capably applied what he’d learned over the years at Knoll, where he utilized thin wires of welded metal to produce pieces that appeared to be floating in the wind — yet remained surprisingly comfortable and supportive. The Diamond chair, a widely revered component of the innovative metal furniture line that Bertoia designed at the company, has been in continuous production at Knoll since 1952 and is available in four finishes today.
Harry Bertoia
Sculptor, furniture and jewelry designer, graphic artist and metalsmith, Harry Bertoia was one of the great cross-disciplinarians of 20th-century art and design and a central figure in American mid-century modernism. Among furniture aficionados, Bertoia is known for his chairs such as the wire-lattice Diamond chair (and its variants such as the tall-backed Bird chair) designed for Knoll Inc. and first released in 1952.
As an artist, he is revered for a style that was his alone. Bertoia’s metal sculptures are by turns expressive and austere, powerful and subtle, intimate in scale and monumental. All embody a tension between the intricacy and precision of Bertoia’s forms and the raw strength of his materials: steel, brass, bronze and copper.
Fortune seemed to guide Bertoia’s artistic development. Born in northeastern Italy, Bertoia immigrated to the United States at age 15, joining an older brother in Detroit. He studied drawing and metalworking in the gifted student program at Cass Technical High School. Recognition led to awards that culminated, in 1937, in a teaching scholarship to attend the Cranbrook Academy of Art in suburban Bloomfield Hills, one of the great crucibles of modernism in America.
At Cranbrook, Bertoia made friendships — with architect Eero Saarinen, designers Charles and Ray Eames and Florence Schust Knoll and others — that shaped the course of his life. He taught metalworking at the school, and when materials rationing during World War II limited the availability of metals, Bertoia focused on jewelry design. He also experimented with monotype printmaking, and 19 of his earliest efforts were bought by the Guggenheim Museum.
In 1943, he left Cranbrook to work in California with the Eameses, helping them develop their now-famed plywood furniture. (Bertoia received scant credit.) Late in that decade, Florence and Hans Knoll persuaded him to move east and join Knoll Inc. His chairs became and remain perennial bestsellers. Royalties allowed Bertoia to devote himself full-time to metal sculpture, a medium he began to explore in earnest in 1947.
By the early 1950s Bertoia was receiving commissions for large-scale works from architects — the first came via Saarinen — as he refined his aesthetic vocabulary into two distinct skeins. One comprises his “sounding sculptures” — gongs and “Sonambient” groupings of rods that strike together and chime when touched by hand or by the wind. The other genre encompasses Bertoia’s naturalistic works: abstract sculptures that suggest bushes, flower petals, leaves, dandelions or sprays of grass.
As you will see on these pages, Harry Bertoia was truly unique; his art and designs manifest a wholly singular combination of delicacy and strength.
Find vintage Harry Bertoia sculptures, armchairs, benches and other furniture and art on 1stDibs.
- ShippingRetrieving quote...Ships From: Stockholm, Sweden
- Return PolicyA return for this item may be initiated within 7 days of delivery.
- Pair of Yngve Ekström "Arka" Easy Arm Chairs in Oak Produced in Sweden, 1950sBy Yngve EkströmLocated in Stockholm, SERare pair of curved mid century "Arka" arm easy chairs in stained oak by Yngve Ekström produced in Sweden 1950s. In good original condition. Dimensions: H: 66 cm / 26" W: 71 cm / 2...Category
Vintage 1950s Swedish Scandinavian Modern Armchairs
MaterialsOak
- Marcel Breuer Model "B34" Bauhaus Chair in Steel Canvas Produced by Thonet 1930sBy Marcel BreuerLocated in Stockholm, SERare "B34" armchair with a tubular steel frame, creamy canvas and dark stained beech wood armrests designed by Marcel Breuer in 1929 and produced by Thonet during the 1930s. Good and...Category
Vintage 1930s German Bauhaus Chairs
MaterialsSteel
- Rare Pierre Jeanneret Dining Office "Box Chair" Produced for Chandigarh, 1950sBy Pierre JeanneretLocated in Stockholm, SEVery rare mid century office dining chair in solid stained teak and rattan by Pierre Jeanneret / Le Corbusier for their Chandigarh project in India 1950s. In good condition and profe...Category
Vintage 1950s Indian Mid-Century Modern Armchairs
MaterialsRattan, Teak
- Pierre Jeanneret Mid Century Wooden "Box Chair" in Teak Produced in India, 1950sBy Pierre JeanneretLocated in Stockholm, SERare mid century wooden "box chair" in dark stained teak by Pierre Jeanneret produced for Chandigarh India, 1950s. In good and professionally restored condition. Cushion included. ...Category
Vintage 1950s Indian Mid-Century Modern Chairs
MaterialsRattan, Teak
- Mid Century Wooden Teak Easy Armchair by Pierre Jeanneret Produced in 1950sBy Pierre JeanneretLocated in Stockholm, SERare mid century easy armchair in teak and rattan by Pierre Jeanneret produced for Chandigarh, India 1950s. In good vintage condition. Cushion is not included but could be made upon ...Category
Vintage 1950s Indian Mid-Century Modern Armchairs
MaterialsRattan, Teak
- Arne Norell Mid Century Asymmetrical Armchair in Velvet Produced in Sweden 1950sBy Arne NorellLocated in Stockholm, SEVery rare mid century asymmetrical free form armchair by Arne Norell in stained birch and newly upholstered brown velvet. Produced in Sweden and in great condition completely restore...Category
Vintage 1950s Swedish Scandinavian Modern Armchairs
MaterialsVelvet, Birch
- Pair of Four White Harry Bertoia "Diamond Chairs" Produced by Knoll, 1950sBy Harry BertoiaLocated in Almelo, NLA set of four of 1960s "421" Diamond chairs by Harry Bertoia for Knoll, in white with contrasting black legs. More information about the designer: Harry Bertoia's finest achieve...Category
Vintage 1950s American Mid-Century Modern Armchairs
MaterialsMetal
- Diamond Chairs by Harry Bertoia for Knoll InternationalBy Knoll, Harry BertoiaLocated in Brussels, BEDiamond chairs by Harry Bertoia for Knoll International, 6 available Sold par piece 1200€.Category
Vintage 1970s European Armchairs
MaterialsChrome
- Diamond Chairs by Harry Bertoia for Knoll InternationalBy Knoll, Harry BertoiaLocated in Brussels, BEDiamond chairs by Harry Bertoia for Knoll International, 6 available Sold par piece 1250€.Category
Vintage 1970s European Armchairs
MaterialsChrome
- Diamond Chairs by Harry Bertoia for Knoll InternationalBy Knoll, Harry BertoiaLocated in Brussels, BEDiamond chairs by Harry Bertoia for Knoll International, 6 available Sold par piece 1200€.Category
Vintage 1970s European Armchairs
MaterialsChrome
- PAIR of Diamond Chairs by Harry BERTOIA, KNOLL INTERNATIONALBy Harry BertoiaLocated in Berlin, BerlinA pair of original Diamond Chairs, designed by Harry Bertoia. U.S.A., Knoll International, 1970s Early production Diamond chairs in white and black painted metal with rust-orange ve...Category
Vintage 1970s American Mid-Century Modern Armchairs
MaterialsMetal
- Pair Mid Century Harry Bertoia Knoll Diamond ChairsBy Knoll, Harry BertoiaLocated in Baltimore, MDA beautiful pair of vintage, knoll, metal mid century, Harry Bertoia, Diamond Chairs. Nice early Harry Bertoia Diamond Chairs for Knoll. A vintage iconic pair designed by Harry Bertoia manufactured by Knoll features original yellow, removable, vinyl, covered wool and metal frames. Chairs can be used with or without fabric, manufactured early label, on underside with knoll’s 320 Park Avenue address, which housed their offices from 1961 to 1970. The pair dates to the early 1960’s. The diamond chair is an astounding study in space, form and function by one of the master sculptors of the last century. Harry Bertoia’s wire chairs...Category
Vintage 1960s American Mid-Century Modern Chairs
MaterialsMetal