Eames Ctw
to
5
2
7
5
2
1
1
Vintage coffe table CTW designed by Ray & Charles Eames
By Charles and Ray Eames
Located in SAINT-YRIEIX-SUR-CHARENTE, FR
CTW coffee table in moulded and painted plywood, designed by Ray and Charles Eames in 1946. From 1994 onwards, the publisher Hermann Miller offered the fourth generation of this mode...
Category
1990s Central American Mid-Century Modern Coffee and Cocktail Tables
Materials
Plywood
CTW Coffee Table by Charles and Ray Eames, United States, 1940s
By Charles and Ray Eames
Located in Antwerp, BE
CTW round coffee table by Charles and Ray Eames for Evans Products, a timeless piece of mid-century modern design that echoes the innovation and elegance synonymous with the creative...
Category
Vintage 1940s American Mid-Century Modern Coffee and Cocktail Tables
Materials
Walnut, Plywood
Charles and Ray Eames CTW Coffee Table in Plywood Herman Miller 2000s
By Charles and Ray Eames, Herman Miller
Located in Ft Lauderdale, FL
Charles and Ray Eames CTW Coffee Table in Plywood Herman Miller 2000s.
Molded birch plywood classic mid-century design. Early 2000's production.
Category
21st Century and Contemporary American Mid-Century Modern Coffee and Coc...
Materials
Plywood
Early Production "CTW" Molded Plywood Coffee Table by Charles & Ray Eames
By Charles and Ray Eames
Located in Coronado, CA
A delightful early production molded plywood "CTW" coffee table by Charles & Ray Eames circa mid 1950s. A wonderful, lightweight design with curvy contours and an overall soft and ge...
Category
Vintage 1950s American Mid-Century Modern Coffee and Cocktail Tables
Materials
Plywood
Eames CTW-3 Coffee Table by Herman Miller
By Charles and Ray Eames, Herman Miller
Located in Highland, IN
This early vintage coffee table by Charles and Ray Eames is an important and iconic design. The result of the couple's experiments in molded plywood, the table is visually and physic...
Category
Vintage 1950s American Mid-Century Modern Coffee and Cocktail Tables
Materials
Ash
Eames Ctw Coffee Table in Beech for Herman Miller, circa 1950
By Charles and Ray Eames, Herman Miller
Located in San Diego, CA
This 3rd Generation Eames CTW Coffee Table for Herman Miller was made in 1950. This table consists of a circular five-layer plywood top, sitting upon four matching legs of bent plywood to a near 90 degrees. CTW was the abbreviated name of the Coffee (C) Table (T) with a Wood (W) base and is an iconic Mid-Century Modern piece. We have restored but not refinished to keep the overall vintage look to the piece. This would be an amazing addition to any space and certainly a conversation starter. This piece has been refinished to perfection.
Dimensions: 15.75”H x 34"W
About the CTW:
Released as part of the 1946 plywood group of furniture, CTW was the abbreviated name of the Coffee (C) Table (T) with a Wood (W) base. The Eames CTW Coffee Table consisted of a circular five-layer plywood top, sat upon four matching legs of bent ply to a near 90 degrees.
The plywood group was the first to be released to the general market for adults by the Eames Office in 1946. The furniture was manufactured first by the Evans Molded Plywood Company and sold through distributor Herman Miller. Miller then bought and took over the range entirely from 1950.
The group was the first of many from the Eames Office to consist of identical tops and different bases to create varying choices. This would famously be a theme for Eames design and seen to an even greater scale with the fiberglass range. The CTW had two matching all wood chairs in the group, the dining DCW and the lounge LCW as well as a sister rectangular table, the OTW. The Eames CTW Coffee Table and matching chairs were also replicated with metal legs and so named the CTM, DCM and LCM.
The Eames CTW tables...
Category
Vintage 1950s American Mid-Century Modern Coffee and Cocktail Tables
Materials
Beech
2nd Generation Eames CTW Coffee Table in Beech
By Charles and Ray Eames
Located in San Diego, CA
This 2nd Generation Eames CTW coffee table for Herman Miller designed in roughly 1946. This table consists of a circular five-layer plywood top, s...
Category
Vintage 1940s American Mid-Century Modern Coffee and Cocktail Tables
Materials
Plywood
Related Items
Round Birch Wood Coffee Table, United States, 1980s
Located in New York, NY
United States 1980s round birch wood coffee table.
This coffee table has two tiers.
The thick top tier is a solid round block of wood.
It is simple and elegant in design.
Category
Vintage 1980s American Coffee and Cocktail Tables
Materials
Birch
Eames La Fonda Slate Top Coffee or End Table for Herman Miller
By Charles and Ray Eames, Herman Miller
Located in Chesterfield, NJ
Handsome La Fonda coffee or large end table designed by Charles and Ray Eames and manufactured by Herman Miller. The series was originally designed for Alexander Girard's La Fonda re...
Category
Vintage 1960s American Mid-Century Modern Coffee and Cocktail Tables
Materials
Slate, Metal
Alexey Krupinin, Coffee table, United States, 2022
By Alexey Krupinin
Located in Los Angeles, CA
A multi-function Object.
Artist Alexey Krupinin
Its complex geometric shape has a durable finish and is made of wood with multiple layers of hand-trowelled Venetian plaster, creati...
Category
2010s American Modern Coffee and Cocktail Tables
Materials
Plaster, Plywood
Charles Eames "Aluminum Group" Coffee Table by Herman Miller
By Charles and Ray Eames
Located in Brooklyn, NY
This Mid-Century Modern coffee table features a white laminate top with black rubber trim and supported by an aluminum base. The original Eames for Herman Miller sticker is affixed t...
Category
Vintage 1950s American Mid-Century Modern Coffee and Cocktail Tables
Materials
Plastic
1965 La Fonda Coffee Table By Charles and Ray Eames for La Fonda Restaurant
By Charles and Ray Eames
Located in Seattle, WA
This La Fonda Coffee Table was part of the "La Fonda Group" Furniture line for Alexander Girard's La Fonda Restaurant in the Time-Life Building. ...
Category
Vintage 1960s North American Mid-Century Modern Coffee and Cocktail Tables
Materials
Aluminum
"La Fonda" Marble Top Coffee Table by Charles & Ray Eames for Herman Miller
By Herman Miller, Charles and Ray Eames
Located in San Diego, CA
A gorgeous "La Fonda" coffee table designed by Charles and Ray Eames for Herman Miller with original Botticinno marble top and polished aluminum base, circa 1970s. This rare table wa...
Category
Mid-20th Century American Mid-Century Modern Coffee and Cocktail Tables
Materials
Marble, Aluminum
Coffe Table Design Vintage
By François Monnet
Located in Napoli, NA
Vintage coffe table.
Design modernariato Small signs of wear.
Category
Vintage 1970s Italian Mid-Century Modern Coffee and Cocktail Tables
Materials
Steel
1950s Vintage Herman Miller Eames CTM Coffee Table
By Charles and Ray Eames
Located in Saint Paul, MN
Third generation black CTM by Ray and Charles Eames for Herman Miller. No label. Retains original feet.
Likely produced in 1950 (due to the domes of silence) as opposed to a late...
Category
Mid-20th Century American Mid-Century Modern Coffee and Cocktail Tables
Materials
Metal
Charles & Ray Eames for Herman Miller 6' Conference Dining Table
By Herman Miller, Charles and Ray Eames
Located in South Charleston, WV
71.75 x 41.75 x 27 7/8". Table was designed by Charles and Ray Eames in the early 1960s for Herman Miller, This model produced 1980. Laminate combed oak top. Signed to underside. Fea...
Category
Vintage 1980s American Mid-Century Modern Conference Tables
Materials
Aluminum
Eames for Herman Miller LTRT Table Anniversary Edition!
By Charles and Ray Eames, Herman Miller
Located in Philadelphia, PA
Eames Blue top LTRT Table, part of Herman Miller "Select" Program. Produced in 2012 in red, yellow, and blue. In Clean condition!
Category
2010s American Mid-Century Modern Side Tables
Materials
Metal
Eames for Herman Miller 32 Inch Round White Marble Coffee Table
By Charles and Ray Eames, Herman Miller
Located in Chattanooga, TN
This listing is for the coffee table alone. The chair and accessories pictured are not included.
Vintage Eames white marble coffee table for Herman Miller. The 32″ diameter coffee table rests on a classic Charles Eames aluminum contract base with black post. The feet feature leveling glides to maintain balance on uneven floors. Eames’ coffee table is typically seen with a white laminate or wood top. This white marble top may be a post-market modification. The Eames cocktail table was first designed in 1958 and has endured through the decades with it’s timeless design.
32” round x 26” High
Condition: The table top has some light wear including a couple of spots on top and small nicks along the edge.
We also have two 32 inch square Eames tables and a boomerang shaped desk on an Eames aluminum base. Complete your office with Charles Pollock Executive chairs (sold separately) in blue velvet, red or blue fabric. Eames collectors will be happy to know that we have twenty naugahyde stackable Eames shell chairs...
Category
Vintage 1970s American Mid-Century Modern Coffee and Cocktail Tables
Materials
Marble, Metal, Aluminum
Eames for Herman Miller Table Post Modern Look
By Ettore Sottsass, Charles and Ray Eames, Herman Miller
Located in BROOKLYN, NY
A post modern take on a classic design. Eames Aluminum group dining or conference table with an 80's take. Stunning cork laminate top with almond edge banding makes this table very d...
Category
1990s American Mid-Century Modern Dining Room Tables
Materials
Aluminum, Steel
Previously Available Items
Vintage Charles Eames CTW Molded Plywood Coffee Table circa 1950s Label Verso
By Charles and Ray Eames
Located in Atlanta, GA
The iconic CTW coffee table by Charles and Ray Eames. For an understanding of this iconic table, I turned to the Eames website, "Released as part of the 1946 plywood group of furniture, CTW was the abbreviated name of the Coffee (C) Table (T) with a Wood (W) base. The Eames CTW Coffee Table consisted of a circular five-layer plywood top, sat upon four matching legs of bent ply to a near 90 degrees. The plywood group was the first to be released to the general market for adults by the Eames Office in 1946. The furniture was manufactured first by the Evans Molded Plywood Company and sold through distributor Herman Miller. Miller then bought and took over the range entirely from 1950. The Eames CTW tables...
Category
Mid-20th Century American Mid-Century Modern Coffee and Cocktail Tables
Materials
Wood, Plywood
Eames Ctw Coffee Table in Beech for Herman Miller, circa 1950
By Charles and Ray Eames, Herman Miller
Located in San Diego, CA
This 3rd Generation Eames CTW Coffee Table for Herman Miller was made in 1950. This table consists of a circular five-layer plywood top, sitting upon four matching legs of bent plywood to a near 90 degrees. CTW was the abbreviated name of the Coffee (C) Table (T) with a Wood (W) base and is an iconic Mid-Century Modern piece. We have restored but not refinished to keep the overall vintage look to the piece. This would be an amazing addition to any space and certainly a conversation starter. This piece has been refinished to perfection.
Dimensions: 15.75”H x 34"W
About the CTW:
Released as part of the 1946 plywood group of furniture, CTW was the abbreviated name of the Coffee (C) Table (T) with a Wood (W) base. The Eames CTW Coffee Table consisted of a circular five-layer plywood top, sat upon four matching legs of bent ply to a near 90 degrees.
The plywood group was the first to be released to the general market for adults by the Eames Office in 1946. The furniture was manufactured first by the Evans Molded Plywood Company and sold through distributor Herman Miller. Miller then bought and took over the range entirely from 1950.
The group was the first of many from the Eames Office to consist of identical tops and different bases to create varying choices. This would famously be a theme for Eames design and seen to an even greater scale with the fiberglass range. The CTW had two matching all wood chairs in the group, the dining DCW and the lounge LCW as well as a sister rectangular table, the OTW. The Eames CTW Coffee Table and matching chairs were also replicated with metal legs and so named the CTM, DCM and LCM.
The Eames CTW tables...
Category
Vintage 1950s American Mid-Century Modern Coffee and Cocktail Tables
Materials
Beech
2nd Generation Eames CTW Coffee Table in Beech
By Charles and Ray Eames
Located in San Diego, CA
This 2nd Generation Eames CTW coffee table for Herman Miller designed in roughly 1946. This table consists of a circular five-layer plywood top, s...
Category
Vintage 1940s American Mid-Century Modern Coffee and Cocktail Tables
Materials
Plywood
Eames CTW Molded Plywood Coffee Table by Herman Miller
By Herman Miller, Charles and Ray Eames
Located in San Francisco, CA
About
An Eames molded plywood coffee table in black.
Creator Charles & Ray Eames for Herman Miller.
Date of manufacture c.201...
Category
21st Century and Contemporary Mid-Century Modern Coffee and Cocktail Tables
Materials
Plywood
Eames CTW in Walnut
By Charles and Ray Eames
Located in Brooklyn, NY
Vintage Eames CTW coffee table in walnut, designed by Charles and Ray Eames. Timeless lightweight design with clean silhouette, sure to bring balance to livi...
Category
Vintage 1960s American Mid-Century Modern Coffee and Cocktail Tables
Materials
Walnut
Molded Oak CTW Coffee Table by Charles and Ray Eames for Herman Miller
By Herman Miller, Charles and Ray Eames
Located in Dorchester, MA
This round oak coffee table by Charles and Ray Eames is a great vintage example of their classic moulded plywood designs for Herman Miller.
Category
Vintage 1960s American Mid-Century Modern Coffee and Cocktail Tables
Materials
Oak
More Charles and Ray Eames Designs
Eames Aluminum Group
Average Price
$3,360
Number Available
80
Eames Aluminum Group
Materials
Metal, Aluminum, Animal Skin, Leather
Styles
Mid Century Modern
Eames Lounge Chair Ottoman
Average Price
$10,432
Number Available
32
Eames Lounge Chair Ottoman
Materials
Wood, Animal Skin, Leather, Metal, Rosewood
Styles
Mid Century Modern
Long before it was the pièce de résistance in a collector’s office or an upscale bachelor pad — landing in ample design magazines, on television and in well-appointed offices over the years — the Eames lounge chair was a fresh, subversive new take on a classic club chair and a culmination of experimentation by its inventive creators.
Charles and Ray Eames (1907–78; 1912–88) met while studying at the Cranbrook Academy of Art, the prestigious Michigan institution that drew such illustrious desi...
Eames Dcm
Average Price
$2,123
Number Available
22
Eames Dcm
Materials
Wood, Metal, Hardwood, Steel, Ash, Plywood
Styles
Mid Century Modern
During World War II, American designers Charles and Ray Eames (1907–78; 1912–88) worked with the United States Navy to make a new leg splint. Recognizing that metal splints could further injure a wounded person through the vibrations of their material, the couple created a new model with molded plywood. That wartime experience propelled the Eameses to continue their explorations in plywood. In 1946, they debuted the DCM, its shortened name referencing the “Dining Height (D) Side Chair (C) on ...
Eames Dax Chair
Average Price
$1,991
Number Available
18
Eames Dax Chair
Materials
Plastic, Fiberglass, Metal, Steel
Styles
Mid Century Modern
The scooped form of the revolutionary single-shell Eames molded fiberglass armchair — of which the Eames DAX chair is a variation — is ubiquitous in interior design today, found everywhere from restaurants to private homes to offices. In 1948, American designers Charles and Ray Eames (1907–78; 1912–88) conceptualized a lounge chair comprising two bonded fiberglass shells as well as a molded fiberglass armchair for the Museum of Modern Art’s International Competition for Low-Cost Furniture Des...