Skip to main content
Want more images or videos?
Request additional images or videos from the seller
1 of 20

Pair of Philadelphia Brass Andirons with Roman Columns and Ball Finials

About the Item

PRESENTING A GORGEOUS Pair of Early 19C Philadelphia Brass Andirons with Roman Columns and Ball Finials. Made in Philadelphia, circa 1800 -10, during the Federal Period. Made of solid brass, the Andirons each sit on 2 bun feet with curved, flowing legs edged or topped with a curved shell. The Central Column is in the form and design of a Roman Column which sits on a square plinth and finishes with a squared plinth at the top. The squared plinth is then topped with a large Ball Finial. The back of the andirons consists of a curved brass bar ending with a smaller ball finial and turned leg, again in solid brass. Extending backwards the Andirons have a curved cast iron stand that would extend into the fireplace. These ANDIRONS are EXTREMELY HIGH QUALITY, PERIOD, HIGH-END ANTIQUES! These pieces have GLORIOUS NATURAL PATINA and AGING. They would have graced a very fine home in the North East of the US in the Early 19th Century. Provenance: From the Private Collection of a High-End Collector amassed over 30 years Dimensions: Each is 26.5 in Tall, 25 in Deep to rear and 13 in Wide at the Feet
  • Dimensions:
    Height: 26.5 in (67.31 cm)Width: 13 in (33.02 cm)Depth: 25 in (63.5 cm)
  • Sold As:
    Set of 2
  • Style:
    Federal (Of the Period)
  • Materials and Techniques:
    Brass,Cast
  • Place of Origin:
  • Period:
  • Date of Manufacture:
    1800-1810
  • Condition:
    Wear consistent with age and use. Very good original condition.
  • Seller Location:
    Dallas, TX
  • Reference Number:
    1stDibs: LU3978114273721
More From This SellerView All
  • Late 19C English Oak Spindle-back Ball Finial Rocker
    Located in Dallas, TX
    PRESENTING A LOVELY & RARE Late 19C English Oak Spindle-back Ball Finial Rocker. Probably made in England or Scotland, circa 1880-90. Made of oak with glorious naturally aged p...
    Category

    Antique Late 19th Century English Late Victorian Rocking Chairs

    Materials

    Oak

  • Early American Canonball Brass Andirons
    Located in Dallas, TX
    PRESENTING a beautiful pair of early American solid brass andirons. Large pieces! Possibly made in or around Virginia, circa 1820-1830. Often referred to as 'Canonball' andirons, ...
    Category

    Antique Early 19th Century American American Classical Andirons

    Materials

    Brass

  • 18th Century Philadelphia Mahogany Hunt Table
    Located in Dallas, TX
    We are pleased to present an absolutely stunning and exceptionally rare and high quality early American piece of furniture history! This table was made in the mid-late 18th century circa 1750-1790 (George III/Regency Era), and is made of solid mahogany and sits on 8 legs with exceptionally carved ball and claw feet, unmistakably in the Philadelphia style of 'Ball and Claw' carving and legs. Made of dark Cuban mahogany with secondary woods of either pine or maple. 2 drop leafs on either side supported by swinging gate legs on either side when upwards. Oval in shape and It would comfortably seat 8/10 people. Made in Philadelphia. Gorgeous original patina, dark mahogany with his gloss wax finish. This is a ‘Hunt’ Table and not to be confused with an Irish ‘Wake’ Table...
    Category

    Antique 18th Century American George III Dining Room Tables

    Materials

    Maple, Mahogany

  • 17C SE Asian Indian Pair of Brackets with Elephants and Mahuts
    Located in Dallas, TX
    Presenting a stunning piece of Indian antiquity from the 17th century, namely, a pair of red Sandstone brackets with elephants and mahuts Central India carvings. From Central India. This piece has impeccable Provenance ! It was purchased by a Private Dallas Collector at Sotheby’s New York Auction on 15th October 2001. Sale Number 7694, Lot No. 102. Sotheby’s operate a twice yearly auction of Southeast Asian Art & Antiquities in New York in the months of March and September. The sculpture was described as: “A pair of brackets with elephants and mahuts. Red Sandstone. Central India. 17th century.” It carried an Auction estimate of USD 8,000 to USD 10,000 and sold for USD 8,400 (not including buyers...
    Category

    Antique 17th Century Indian Archaistic Antiquities

    Materials

    Sandstone

  • Monumental Pair of Late 19C French Empire Brass Wall Sconces
    Located in Dallas, TX
    PRESENTING A EXCEPTIONAL, RARE and MONUMENTAL Pair of Late 19C French Empire Brass Wall Sconces. These matching pair of wall sconces or wall lights are LARGE! Made in France, circa 1890 of solid brass in the Empire Style. Each, is three and a half foot tall (41 inches) and each has 5 branches/lights, with frosted glass flame/torch shades. Unusually, the branches, lights and shades all point downwards, probably due to the Size of each sconce. They are flush mounted wall sconces/lights and weigh around 30 lbs each. At the top they have the Classic ribbon bow. As you move downwards, the have a large convex medallion/armorial medallion, with swags and laurel wreaths below The lower portion has a central tassel swag over a fluted architectural column which ends with an acorn/flower bulb style finial. Each light branch is decorated with a floral curved and scrolling leaf. The rear of the sconces has all the ‘oxidization’ one would expect from late 19th century pieces. Fully operational and in great condition. Good quality casting. Not marked, but were undoubtedly made by a top French maker! WE ‘DARE’ YOU TO FIND ANOTHER PAIR! A 'FANTASTIC' match for the Empire Bedroom Set in our Collection as seen in the pics. Provenance: From the Private Collection of a Former Dallas French Antique...
    Category

    Antique Late 19th Century French Empire Revival Wall Lights and Sconces

    Materials

    Brass

  • Vintage Gold and Brass 4 Light Lantern
    By Moe Lighting
    Located in Dallas, TX
    Presenting a lovely vintage gold and brass 4 light lantern from circa 1955. Lovely restored Moe Lighting Lantern from circa 1955. Made in the U.S.A. 4 bulb Lantern in full functional condition and sympathetically restored to its original beauty. The Lantern is gilt metal and brass and is covered in gold leaf. It has been recently re-gilted. The top finial of the lantern is beautifully cast with scrolling arms and handles. There are 5 glass panels edged in brass. The interior working bulb platform is on a tilt central column or lever that tilts with the movement of the lantern in the wind. Both the top and bottom parts of the lantern have a pierced gallery and the base has a removeable plate with a final to access the bulbs on the interior. The interior has a label hidden from view under the bulb base (see photos) confirming that the Lantern was made by Moe Light of Fort Atkinson Wisconsin a Division of Thomas Industries. This helps us date the piece as Moe Lighting was acquired by Thomas Industries in 1953. We are of the opinion that this piece date from the mid 1950’s. A beautiful addition to any home of style !! Thomas Industries was formed in a 1953 merger of two companies–a lighting fixture manufacturer and the maker of electrical spraying machines–both of which came into being in the late 1920s. The unlikely marriage of these two product lines was the cornerstone of what would become the company’s two core businesses: lighting fixtures and air compressors/pumps. The lighting fixture side of Thomas Industries traces its history back to Milwaukee, Wisconsin, and two brothers: Henrik and Ole Moe. The Moe Brothers, together with a number of other entrepreneurs, owned the Moe-Bridges Co., a lighting fixture manufacturer formed in 1919. As a result of friction among the Moe-Bridges management, however, the Moe brothers were frozen out of the company in the late 1920s by the majority owners. Deciding to stay with the industry they knew, the Moes formed another lighting fixture company called Moe Brothers Manufacturing. Henrik’s two sons joined the business in the early 1930s, and in 1938, the company moved its operations from Milwaukee to Fort Atkinson, Wisconsin. While the Moe brothers were building their lighting fixture business, the Electric Sprayit Company–the forerunner to Thomas Industries’ compressor and pump division–was also testing its wings. In 1928, the Electric Sprayit Company was formed in Chicago “to manufacture, buy, and sell electrical spraying machines, blowers, air compressors, mechanical, and mercantile devices.” In a curious twist of fate, in 1934 the Electric Sprayit Company acquired Moe-Bridges, the company that had forced out the Moe brothers, and moved from Chicago into the Moe-Bridges plant in Milwaukee. In 1939, Electric Sprayit moved its operations again, this time to Sheboygan, Wisconsin. During World War II, both companies stopped making their standard product lines in order to produce materials for the war effort. At the close of the war, in 1946, Moe Brothers received a large contract from Sears to produce household pressure cookers. Although the company had not previously manufactured pressure cookers, the large stamping presses they had obtained for the war gave them the production capabilities for the job. The brothers planned to use sales revenues from the pressure cooker contract to return to the lighting fixture business. Unfortunately, Sears rescinded the company’s contract due to a product malfunction. In the aftermath of the contract loss, pressured by the bank to repay existing debt, the Moe brothers decided to sell the company. Moe Brothers was purchased in 1948 by a Louisville investment group headed by Lee Thomas. Thomas, the former president of Ekco Products in Chicago, had recently purchased a small saw business in Louisville and was looking for further investment opportunities. His new purchase was renamed Moe Light, and a national advertising campaign was launched to promote residential lighting fixtures. Two years later, Moe Light expanded by opening a new residential lighting factory in Kentucky and acquiring the Los Angeles-based Star...
    Category

    Mid-20th Century American American Classical Lanterns

    Materials

    Brass, Gold Leaf

You May Also Like
  • Pair of Philadelphia Brass Flanking Urn Finial Andirons with Engravings, C 1790
    By Philadelphia Museum
    Located in Hollywood, SC
    Pair of Philadelphia brass flanking urn finial andirons with swags, centered fluted columns, and resting on squared chased engraved medallion plinths with spur legs and ball & claw f...
    Category

    Antique 1790s American American Colonial Andirons

    Materials

    Brass, Wrought Iron

  • Pair of Chenets or Andirons with a Ball and Flame Finial, 19th Century
    Located in Savannah, GA
    19th Century Pair of Chenets or Andirons with a Ball and Flame Finial Professionally cleaned and polished
    Category

    Antique 19th Century French Andirons

    Materials

    Brass

  • Elegant Pair of English Andirons with Brass Acorn Finials
    Located in London, GB
    A pair of very large polished wrought iron firedogs with scrolled feet and brass acorn finials. English, 19th century. Measures: Height: 1040 mm 41" Wi...
    Category

    Antique 19th Century English Andirons

    Materials

    Iron, Brass

  • American Federal Philadelphia Brass Andirons Faceted Acorn Top
    Located in Wells, ME
    American Federal Philadelphia cast brass faceted acorn top large andirons. The motif of faceting is repeated in the stepped faceted column as well as on the acorns. The columns rest ...
    Category

    Antique Late 18th Century American Federal Andirons

    Materials

    Brass, Wrought Iron

  • Large Pair of Arts & Crafts Andirons with Brass Sunflower Finials
    Located in London, GB
    A large pair of late 19th century Arts & Crafts steel firedogs with scrolled form to feet and shafts surmounted by oval centre and repousse droplets. Copper sunflower tops with brass...
    Category

    Antique 19th Century English Arts and Crafts Andirons

    Materials

    Steel

  • Pair of Old Cannon Ball Brass Andiron
    Located in North Salem, NY
    Pair of Old Solid Brass Cannon Ball Andirons.
    Category

    20th Century Fireplace Tools and Chimney Pots

    Materials

    Brass, Iron

Recently Viewed

View All