Vintage Mid-Century Modern Large Diamond Chair by Harry Bertoia for Knoll
About the Item
- Creator:Harry Bertoia (Designer)
- Design:
- Dimensions:Height: 28.25 in (71.76 cm)Width: 45.5 in (115.57 cm)Depth: 31.5 in (80.01 cm)Seat Height: 16.5 in (41.91 cm)
- Style:Mid-Century Modern (Of the Period)
- Materials and Techniques:Metal,Welded
- Place of Origin:
- Period:
- Date of Manufacture:1960s
- Condition:Reupholstered. Refinished. Wear consistent with age and use.
- Seller Location:San Marcos, CA
- Reference Number:1stDibs: LU7060229933752
Diamond Chair
To fully understand the design of Harry Bertoia’s (1915–78) 1952 Diamond chair — an austere and photogenic work of woven steel wire, the intricately sculptural wings of which create the illusion of sitting on air — it helps to go back to his college days: In 1937, the Italian-born artist and designer, who emigrated to Detroit at age 15, earned a scholarship to Cranbrook Academy of Art, the illustrious Michigan design school that attracted such luminaries as Florence Knoll, Eero Saarinen and Charles and Ray Eames. Bertoia was deeply influenced by the Eameses, especially by the sculptural quality that was so prominent in the furniture they made. In the 1940s, he left Cranbrook to work for the couple, developing the molded plywood furniture that would become a trademark of their designs.
Bertoia learned to weld while employed by the Eameses, but left their workshop in anger over the lack of credit he received for the important contributions he made there — a dispute that would come to play an important role in the Diamond chair’s development. He eventually took a job at an electronics lab, where he analyzed human mobility for the purpose of designing electronics with easy-to-reach knobs and consoles.
When his former Cranbrook classmate Florence Knoll tapped Bertoia to make furniture for the Pennsylvania company she had recently founded with her husband, Hans, the designer was swayed with the promise of full credit for designs he produced. Armed with a newly minted background in ergonomics as well as the knowledge he gathered from experimentation with the Eameses, Bertoia capably applied what he’d learned over the years at Knoll, where he utilized thin wires of welded metal to produce pieces that appeared to be floating in the wind — yet remained surprisingly comfortable and supportive. The Diamond chair, a widely revered component of the innovative metal furniture line that Bertoia designed at the company, has been in continuous production at Knoll since 1952 and is available in four finishes today.
Harry Bertoia
Sculptor, furniture and jewelry designer, graphic artist and metalsmith, Harry Bertoia was one of the great cross-disciplinarians of 20th-century art and design and a central figure in American modernism. Among furniture aficionados he is known for the wire-lattice Diamond chair (and its variants such as the tall-backed Bird chair) designed for Knoll Inc. and first released in 1952. As an artist, Bertoia is revered for a style that was his alone. Bertoia’s metal sculptures are by turns expressive and austere, powerful and subtle, intimate in scale and monumental. All embody a tension between the intricacy and precision of Bertoia’s forms and the raw strength of his materials: steel, brass, bronze and copper.
Fortune seemed to guide Bertoia’s artistic development. Born in northeastern Italy, Bertoia immigrated to the United States at age 15, joining an older brother in Detroit. He studied drawing and metalworking in the gifted student program at Cass Technical High School. Recognition led to awards that culminated, in 1937, in a teaching scholarship to attend the Cranbrook Academy of Art in suburban Bloomfield Hills, one of the great crucibles of modernism in America. There, Bertoia made friendships — with architect Eero Saarinen, designers Charles and Ray Eames and Florence Schust Knoll and others — that shaped the course of his life. He taught metalworking at Cranbrook, and when materials rationing during World War II limited the availability of metals, Bertoia focused on jewelry design. He also experimented with monotype printmaking, and 19 of his earliest efforts were bought by the Guggenheim Museum.
In 1943, he left Cranbrook to work in California with the Eameses, helping them develop their now-famed plywood furniture. (Bertoia received scant credit.) Late in that decade, Florence and Hans Knoll persuaded him to move east and join Knoll Inc. His chairs became, and remain, perennial bestsellers. Royalties allowed Bertoia to devote himself full-time to metal sculpture, a medium he began to explore in earnest in 1947.
By the early 1950s Bertoia was receiving commissions for large-scale works from architects — the first came via Saarinen — as he refined his aesthetic vocabulary into two distinct skeins. One comprises his “sounding sculptures” — gongs and “Sonambient” groupings of rods that strike together and chime when touched by hand or by the wind. The other genre encompasses Bertoia’s naturalistic works: abstract sculptures that suggest bushes, flower petals, leaves, dandelions or sprays of grass. As you will see on these pages, Harry Bertoia was truly unique; his art and designs manifest a wholly singular combination of delicacy and strength.
- ShippingRetrieving quote...Ships From: San Marcos, CA
- Return PolicyA return for this item may be initiated within 3 days of delivery.
- Mid Century Danish Modern Teak High Back Lounge Chair by Ulferts FabrikerBy Ulferts SwedishLocated in San Marcos, CAHere is a beautiful lounge chair manufactured in Sweden for Ulferts Fabriker circa 1960s, this high-backed lounge chair has a great look. Chair has been completely refinished and has...Category
Vintage 1960s Swedish Scandinavian Modern Lounge Chairs
MaterialsTeak
- Vintage Mid Century Danish Modern Teak Credenza/CabinetLocated in San Marcos, CAVintage Danish Modern Teak credenza. This piece is very versatile, could be used as a media console, bookcase or an entryway piece. Has 2 adjustable shelves on each side. Finished ...Category
Vintage 1960s Danish Scandinavian Modern Cabinets
MaterialsTeak
- Vintage Mid Century Bar Stools by Chet BeardsleyBy Chet BeardsleyLocated in San Marcos, CAHere is a killer pair of vintage mid century bar stools by Chet Beardsley. Original yellow vinyl fabric is in great vintage condition with minimal wear. Solid black walnut frames are...Category
Vintage 1960s American Mid-Century Modern Stools
MaterialsWalnut
- Vintage Mid Century Walnut Credenza by BP JohnLocated in San Marcos, CAFor sale is a vintage credenza by BP John circa 1963 in walnut. Credenza features three drawers and one cabinet. Piece has been completely refinished, hardware has been polished. Thi...Category
Vintage 1960s American Mid-Century Modern Credenzas
MaterialsWalnut
- Mid Century Danish Modern Erik Buch Dining Chairs Model 49By Erik BuchLocated in San Marcos, CAHere's is an amazing pair of the quintessential Danish teak dining chairs designed by Erik Buch Model 49. these chairs have been completed refinished and have...Category
Vintage 1960s Danish Scandinavian Modern Dining Room Chairs
MaterialsTeak
- Set of 4 Mid-Century Danish Modern Dining Chairs by Erik Buch-Model 49/50By Erik BuchLocated in San Marcos, CAHere's is an amazing set of 4 of the quintessential Danish teak dining chairs designed by Erik Buch Model 49 and 50. These chairs have been completed refinished and have brand new charcoal...Category
Vintage 1960s Danish Scandinavian Modern Dining Room Chairs
MaterialsTeak
- Harry Bertoia for Knoll Large Diamond ChairBy Harry Bertoia, KnollLocated in Philadelphia, PAHarry Bertoia for Knoll large diamond chair with a green cover. Base is original white. Bushings are in good shape, and overall the cover is pretty clean! ...Category
Vintage 1970s American Mid-Century Modern Lounge Chairs
MaterialsMetal
- Mid-Century Modern “Diamond” Chairs Designed by Harry Bertoia for Knoll, a PairBy Harry Bertoia, KnollLocated in Union City, NJMid-Century Modern “Diamond” Chairs Designed By Harry Bertoia For Knoll, circa 1960s. This early pair of Diamond chairs feature original fully upholstered black leather covers. Both ...Category
Vintage 1960s Mid-Century Modern Lounge Chairs
MaterialsMetal
- Large Diamond Chair by Harry Bertoia for Knoll, 1970sBy Knoll, Harry BertoiaLocated in Lasne, BEArmchair in metal and blue fabric by Harry Bertoia. Large Diamond model. Seat height: 39 cm. Wear due to time and age.Category
Vintage 1970s Central American Mid-Century Modern Lounge Chairs
MaterialsMetal
- Harry Bertoia for Knoll Large Chrome Diamond ChairBy Harry Bertoia, KnollLocated in Ferndale, MIHarry Bertoias concept of woven welded steel wire was to present a chair appearing lighter than air. This is the large diamond chair from his wire ser...Category
Mid-20th Century Mid-Century Modern Lounge Chairs
MaterialsSteel, Chrome
- Pair of Large Diamond Chairs by Harry Bertoia for KnollBy Knoll, Harry BertoiaLocated in Dallas, TXFabulous, iconic pair of large "Diamond Chairs" by Harry Bertoia for Knoll. Black metal frames and yellow upholstery.Category
Vintage 1960s Mid-Century Modern Chairs
MaterialsSteel
- Vintage Diamond Chair by Harry Bertoia for Knoll, Set of 2By Harry BertoiaLocated in Cape Town, WCUsing industrial material while elevating the chair to the status of an art-work, Bertoia cemented the conversation around utility and aesthetics within the context of furniture desi...Category
Vintage 1950s American Mid-Century Modern Lounge Chairs
MaterialsSteel