Cesca Chair by Marcel Breuer for Knoll 'Manufactured by Gavina, 1973'
View Similar Items
Cesca Chair by Marcel Breuer for Knoll 'Manufactured by Gavina, 1973'
About the Item
- Creator:Marcel Breuer (Designer)
- Design:
- Dimensions:Height: 31.5 in (80.01 cm)Width: 18.5 in (46.99 cm)Depth: 23.5 in (59.69 cm)Seat Height: 17.75 in (45.09 cm)
- Style:Mid-Century Modern (Of the Period)
- Materials and Techniques:
- Place of Origin:
- Period:
- Date of Manufacture:1973
- Condition:
- Seller Location:Centreville, VA
- Reference Number:1stDibs: LU8365233886222
Cesca Chair
Ubiquitous but never boring, the Cesca chair has defined casual elegance in the dining room since 1928. Designed by Marcel Breuer (1902–81) for the Austrian furniture maker Gebrüder Thonet, the original Cesca chair combines natural beechwood caning and modern tubular steel for a sensibility that celebrates both handicraft and industrialization. It’s a paragon of Bauhaus design, embodying the school’s “truth to materials” philosophy and adhering to the movement’s emphasis on mass production. In fact, the Cesca chair was the first-ever tubular steel frame chair with a caned seat to be mass produced — a breakthrough for furniture design.
Breuer got his start in architecture after dropping out of the painting program at the Academy of Fine Arts in Vienna. He began apprenticing with a Viennese architect and went on to join the Bauhaus movement in 1921, when he was just 19 years old, eventually becoming a master carpenter at the German arts school. While there, Breuer designed furniture for Sommerfeld House in Berlin, industrialist Adolf Sommerfeld’s private residence, which was conceived by architects Walter Gropius (the Bauhaus school’s founder) and Adolf Meyer. Not long afterward, Breuer’s experiments with tubular steel would yield his Wassily chair, named for his friend, painter and Bauhaus professor Wassily Kandinsky, as well as the Cesca.
Originally called the B32, Breuer renamed the chair in honor of his daughter, Francesca, when Italian manufacturer Gavina began producing it in the early 1960s. Knoll introduced the chair when it acquired Gavina in 1968 and continues to manufacture it today.
And while the Cesca chair’s silhouette has remained the same throughout the decades, Breuer himself later made minor modifications, including the implementation of a shallower curve to the back and the addition of a second piece of steel for the frame to account for both comfort and durability. With the Cesca’s cantilevered construction, Breuer’s design transcended that of the traditional four-legged dining chair, pushing the boundaries of what “everyday” could mean in furniture.
Marcel Breuer
The architect and designer Marcel Breuer was one the 20th century’s most influential and innovative adherents of modernism. A member of the Bauhaus faculty, Breuer — like such colleagues as the architects Walter Gropius and Ludwig Mies van der Rohe, and the artists and art theoreticians László Moholy-Nagy and Josef Albers — left Europe in the 1930s to champion the new design philosophy and its practice in the United States.
Born in Hungary, Breuer became a Bauhaus student in 1920 and quickly impressed Gropius, the German school’s founder, with his aptitude for furniture design. His early work was influenced by the minimalist Dutch design movement De Stijl — in particular the work of architect Gerrit Rietveld.
In 1925, while he was head of the Bauhaus furniture workshop, Breuer realized his signature innovation: the use of lightweight tubular-steel frames for chairs, tables and sofas — a technique soon adopted by Mies and others. Breuer’s attention gradually shifted from design to architecture, and, at the urging of Gropius, he joined his mentor in 1937 on the faculty of Harvard and in an architectural practice.
In the 1940s, Breuer opened his own architectural office, and there his style evolved from geometric, glass-walled structures toward a kind of hybrid architecture — seen in numerous Breuer houses in New England — that pairs bases of local fieldstone with sleek, wood-framed modernist upper floors. In his later, larger commissions, Breuer worked chiefly with reinforced concrete and stone, as seen in his best-known design, the brutalist inverted ziggurat built in New York in 1966 as the home of the Whitney Museum of American Art.
Breuer’s most famous furniture pieces are those made of tubular steel, which include the Wassily chair — named after Wassily Kandinsky and recognizable for its leather-strap seating supports — and the caned Cesca chair.
Breuer also made several notable designs in molded plywood, including a chaise and nesting table for the British firm Isokon and a student furniture suite commissioned in 1938 for a dormitory at Bryn Mawr College. Whether in metal or wood, Breuer’s design objects are elegant and adaptable examples of classic modernist design — useful and appropriate in any environment.
Find vintage Marcel Breuer seating, storage cabinets and lighting on 1stDibs.
- Barcelona Chair by Ludwig Mies van der Rohe for KnollBy Ludwig Mies van der RoheLocated in Centreville, VAAs a rising figure of the modernist movement, Ludwig Mies van der Rohe was selected to design the German Pavilion for the 1929 International Exposition in Barcelona. Through masterf...Category
Vintage 1920s American Bauhaus Lounge Chairs
MaterialsChrome
- Chair 65 by Alvar Aalto for Artek (White laminate)By Alvar AaltoLocated in Centreville, VAClean lines and a simple structure define the design of Chair 65. A low, rectangular backrest is formed from a single piece of birch plywood and has a slight curve that forms natur...Category
Vintage 1930s Finnish Mid-Century Modern Chairs
MaterialsBentwood
- La Fonda Arm Chair by Eames for Herman MillerBy Charles and Ray EamesLocated in Centreville, VAThis arm chair is one of two new fiberglass chairs Charles and Ray Eames designed in 1961, inspired by request from Alexander Girard, who needed seating for his new Manhattan restaurant, La Fonda Del Sol. Some collectors call these “La Fonda” chairs after the restaurant where they were first installed. Because Girard wanted chairs with seat backs no higher than dining table tops, Charles and Ray Eames designed the Eames La Fonda Arm Chair...Category
Vintage 1960s American Mid-Century Modern Armchairs
MaterialsSteel
- La Fonda Arm Chair by Eames for Herman MillerBy Charles and Ray EamesLocated in Centreville, VAThis arm chair is one of two new fiberglass chairs Charles and Ray Eames designed in 1961, inspired by request from Alexander Girard, who needed seating for his new Manhattan restaurant, La Fonda Del Sol. Some collectors call these “La Fonda” chairs after the restaurant where they were first installed. Because Girard wanted chairs with seat backs no higher than dining table tops, Charles and Ray Eames designed the Eames La Fonda Arm Chair...Category
Vintage 1960s American Mid-Century Modern Armchairs
MaterialsSteel
- Togo Fireside Chair by Michel Ducaroy for Ligne Roset (Like New)By Michel DucaroyLocated in Centreville, VAThe Togo® Collection (1973) has been an icon of comfort and style for 50 years. Eliminating the typical base or frame, designer Michel Ducaroy created Togo's distinctive slouchy form...Category
Vintage 1970s French Mid-Century Modern Sofas
MaterialsPolyester
- First Chair by Michele De Lucchi for Memphis MilanoLocated in Centreville, VAMichele de Lucchi was one of the cofounders of the Milano Design Group Memphis, which emerged at the end of 1980 around the central figure of Ettore Sottsass. “First” by Michele d...Category
Late 20th Century Armchairs
MaterialsSteel
- 1970s Gavina Italy Chair "Cesca" by Marcel BreuerBy Marcel BreuerLocated in Biella, ITGavina production Italy chair "cesca" by Marcel Breuer design years '70, signed label.Category
Vintage 1970s Italian Modern Club Chairs
MaterialsMetal
- 4 CESCA chairs model B.32, design by Marcel Breuer for Gavina, 1970sBy Marcel Breuer, GavinaLocated in Milan, ITSet of 4 CESCA chairs, model B32, design by Marcel Breuer for Gavina, Italian manufacture from the seventies. Chromed tubular steel structure, seat and backrest in straw with profil...Category
Vintage 1970s Italian Mid-Century Modern Chairs
MaterialsSteel
- Set of 2 Chairs Cesca, Marcel Breuer, Gavina, 1970By Marcel Breuer, GavinaLocated in Milano, LombardiaSet of 2 Chairs Cesca, Marcel Breuer, Gavina, 1970. The Set of 2 Cesca Chairs, designed by Marcel Breuer in 1970 for Gavina, epitomizes modernist elegan...Category
Vintage 1970s Italian Mid-Century Modern Chairs
MaterialsMetal
- Marcel Breuer for Gavina Set of 6 "Cesca" Chairs, Italy 1960sBy Gavina, Marcel BreuerLocated in Naples, ITSet of 6 Cesca chairs designed by Marcel Breuer, produced by Gavina in 1960. The chairs show slight signs of wear, the seats are original Vienna straw. The combination of Vienna stra...Category
Vintage 1960s Italian Mid-Century Modern Dining Room Chairs
MaterialsMetal
- Mid Century Modern Cesca Chair by Marcel Breuer for KnollBy Marcel Breuer, KnollLocated in Lisboa, LisboaSet of 22 dining Cesca chairs designed by Marcel Breuer in 1928 and produced since that year till today. At the moment Knoll have the rights to do it. Chrome plated tubular frame, se...Category
Mid-20th Century Italian Mid-Century Modern Dining Room Chairs
MaterialsMetal
- 'S32' Cesca Chairs by Marcel Breuer and GavinaBy Marcel BreuerLocated in London, EnglandHeight: 78cm Width: 46cm Depth: 56cm Seat Height: 46cm Designer: Marcel Breuer Manufacturer: Gavina, Italy Date: 1970s Materials: Beech, steel, cane Description: Manufactured for Gavina and made from chromed metal, wood, rattan. Manufacturing label present. Restored by Golborne 44...Category
Vintage 1970s European Chairs
MaterialsSteel, Chrome
$1,665 Sale Price / item20% Off