Georgian Stairs

French Post-War Design (1966) polished aluminum helicoid form circular 13 step staircase with rubber step surface (designed by ROGER TALLON)

This is a very beautiful unique stairs. It is hand carved and comes out of a mansion Near Paris, France.

A monumental, completely free-standing, dark oak spiral staircase. The central newel of this very large spiral staircase consists of an entire solid oak tree trunk, which is made into a strong pole with a diameter of 30 cm. Because of this, the bullnose steps around it have remained firmly in place for 150 years without sagging. The oak round edge (stringer) that surrounds the steps consists of large, hand-worked, strong pieces of oak that show the extraordinary craftsmanship of the stair builders. The banister consists of a wrought iron railing that on wrought iron spindles or balusters with rosettes, starting with an ornamented cast iron hand baluster. The underside of the stairs, between the stringer and the central newel, was originally plastered. This plaster had to be removed in order to break out the staircase in one piece, without cutting it. When the stairs are placed in a new house, plaster can be applied again. The photos show how we got the stairs out in one piece by breaking down an inner wall and an outer wall. The original plaster of the stairs is also clearly visible in the photos. The measurements are: Total height: 448.5 cm 22 steps of 19.5 cm high plus the last step to the landing is 23 x 19.5 = 448.5 cm Step width: 77 cm Width bottom step: 88 cm Depth steps: 9 to 46 cm, in the middle of the step ± 30 cm. Pole diameter: 19 cm Total staircase diameter (including the handrail): 175 cm Height of the round outer edge of the stairs 20.5 cm. Height of the bannister...

Early 20th century spiral wooden staircase from Spain Ideal for lofts an big spaces. It was located in south spain to comunicate the groundfloor wh...

HELICOID STAIRCASE ROGER TALLON Helicoid staircase, also known as Escalier M400, designed by the French industrial designer Roger Tallon, produced ...

An early 19th century elm and oak cricket table, with straight tapering legs,

19th Century English Jacobean End Table was hand-crafted by able artisans from indigenous old-growth oak, and features a solid plank top supported by solid plank aprons connected on each corner with the top of four beautifully turned legs. It would be fascinating to see how the legs were turned using tools...

19th century Rustic pine side table from England. The top has rounded front corners, and follows down to simple aprons on the sides. The front of the table has two single drawers, bo...

19th century pine cricket table from England. The top is made from planks and has pegged construction. The top is supported on a simple apron and splayed legs which have been hand ...

19th century oak joint stool from England with a single plank seat which has a beveled edge, following down to a hand carved decorated apron with a nuked pattern over hand turned leg...

Early 20th century folding library steps/table. Mahogany Library steps with inset tooled leather surfaces. Stains to leather, repaired splits to ...

19th century French Renaissance library table in stripped oak is perfect as a center table creating a timeless old world effect. The rectangu...