Vintage Steel Mesh Side Chair by Harry Bertoia
About the Item
- Creator:Harry Bertoia (Designer)
- Design:
- Dimensions:Height: 28.75 in (73 cm)Width: 21.26 in (54 cm)Depth: 22.84 in (58 cm)Seat Height: 18.12 in (46 cm)
- Style:Mid-Century Modern (Of the Period)
- Materials and Techniques:
- Place of Origin:
- Period:
- Date of Manufacture:Unknown
- Condition:Refinished. Wear consistent with age and use. The item has been used in a living space and shows some signs of wear and tear. No structural damage.
- Seller Location:Cape Town, ZA
- Reference Number:1stDibs: LU6897229725502
Bertoia Side Chair
When Hans and Florence Knoll invited Italian-American artist Harry Bertoia (1915–78) to move from California to Pennsylvania in 1950 to work with their new design firm, they did not ask him to develop any specific pieces but instead to investigate whatever interested him. That open-ended experimentation led to the 1952 Bertoia Side chair, which was fitted with a fluid metal lattice that gave the seating an ethereal quality. Bertoia considered his collection of chairs created for Knoll Associates to be “mainly made of air, like sculpture,” as he bent steel wire into striking lightweight forms.
While these chairs were innovative in their use of industrial materials, they also had a progressive approach to the ergonomics of seating. Bertoia had previously collaborated with Charles and Ray Eames on molded plywood chairs — what would become the LCW (Lounge Chair Wood) — yet was miffed by the lack of credit for his work. He went on to take a job in engineering for the human body at the Point Loma Naval Electrical Lab in La Jolla, California, during which he created metal sculptures in his spare time. The opportunity from Knoll, another of his former classmates at the famed Cranbrook Academy of Art in Michigan — Bertoia met the Eameses and Knoll and later taught metalworking there — gave him the time and space to devote himself to his own ideas independently. And, as with all Knoll designers, he would get named recognition for his designs.
In a garage in Bally, Pennsylvania, he set up his metal shop and developed ideas for the welded steel grids he would use in his seating. At the time, most chairs were constructed from wood; Bertoia saw the potential for graceful and comfortable designs in the strong material of metal. Along with the Bertoia Side chair, he created the Diamond chair with a diamond pattern in its metalwork and the undulating Asymmetric Chaise (which was too complicated to manufacture until 2005), all with the transparent volume that gives his metal furniture a sense of floating.
Although he would shift to making art rather than furniture, Bertoia still worked on a number of sculptural and architectural designs for the Knoll Planning Unit in the years that followed. Knoll, Inc. has produced the Bertoia Side chair since it was introduced, with its durable materials and optional upholstery or seat covers that can be snapped on and off, making it popular for indoor and outdoor seating.
Harry Bertoia
Sculptor, furniture and jewelry designer, graphic artist and metalsmith, Harry Bertoia was one of the great cross-disciplinarians of 20th-century art and design and a central figure in American mid-century modernism. Among furniture aficionados, Bertoia is known for his chairs such as the wire-lattice Diamond chair (and its variants such as the tall-backed Bird chair) designed for Knoll Inc. and first released in 1952.
As an artist, he is revered for a style that was his alone. Bertoia’s metal sculptures are by turns expressive and austere, powerful and subtle, intimate in scale and monumental. All embody a tension between the intricacy and precision of Bertoia’s forms and the raw strength of his materials: steel, brass, bronze and copper.
Fortune seemed to guide Bertoia’s artistic development. Born in northeastern Italy, Bertoia immigrated to the United States at age 15, joining an older brother in Detroit. He studied drawing and metalworking in the gifted student program at Cass Technical High School. Recognition led to awards that culminated, in 1937, in a teaching scholarship to attend the Cranbrook Academy of Art in suburban Bloomfield Hills, one of the great crucibles of modernism in America.
At Cranbrook, Bertoia made friendships — with architect Eero Saarinen, designers Charles and Ray Eames and Florence Schust Knoll and others — that shaped the course of his life. He taught metalworking at the school, and when materials rationing during World War II limited the availability of metals, Bertoia focused on jewelry design. He also experimented with monotype printmaking, and 19 of his earliest efforts were bought by the Guggenheim Museum.
In 1943, he left Cranbrook to work in California with the Eameses, helping them develop their now-famed plywood furniture. (Bertoia received scant credit.) Late in that decade, Florence and Hans Knoll persuaded him to move east and join Knoll Inc. His chairs became and remain perennial bestsellers. Royalties allowed Bertoia to devote himself full-time to metal sculpture, a medium he began to explore in earnest in 1947.
By the early 1950s Bertoia was receiving commissions for large-scale works from architects — the first came via Saarinen — as he refined his aesthetic vocabulary into two distinct skeins. One comprises his “sounding sculptures” — gongs and “Sonambient” groupings of rods that strike together and chime when touched by hand or by the wind. The other genre encompasses Bertoia’s naturalistic works: abstract sculptures that suggest bushes, flower petals, leaves, dandelions or sprays of grass.
As you will see on these pages, Harry Bertoia was truly unique; his art and designs manifest a wholly singular combination of delicacy and strength.
Find vintage Harry Bertoia sculptures, armchairs, benches and other furniture and art on 1stDibs.
- ShippingRetrieving quote...Ships From: Cape Town, South Africa
- Return PolicyA return for this item may be initiated within 7 days of delivery.
- Vintage Diamond Chair by Harry Bertoia for Knoll, Set of 2By Harry BertoiaLocated in Cape Town, WCUsing industrial material while elevating the chair to the status of an art-work, Bertoia cemented the conversation around utility and aesthetics within the context of furniture desi...Category
Vintage 1950s American Mid-Century Modern Lounge Chairs
MaterialsSteel
- Pair of Vintage Model 65 Chairs by Alvar AaltoBy Artek, Alvar AaltoLocated in Cape Town, WCModel 65 encapsulates designer Alvar Aalto’s approach to systematic, rational design within the context of Finnish minimalism; showcasing clean lines and his favoured use of birchwoo...Category
Vintage 1940s European Mid-Century Modern Chairs
MaterialsBirch
- Set of Vintage DalVera Les Arcs Chairs chosen by Charlotte PerriandBy DalVeraLocated in Cape Town, WCStructurally, the chrome frame imitates the backward position of an armchair – yet without armrests, instead finding its comfort in its Cognac leather seat...Category
Vintage 1970s European Mid-Century Modern Chairs
MaterialsSteel
- Pair of Foldable Plia Chairs by Giancarlo PirettiBy Giancarlo PirettiLocated in Cape Town, WCThe essential folding chair, the Plia showcases function while marking the move towards transparent furniture design trends from the late 1960s to the 19...Category
Vintage 1960s Italian Mid-Century Modern Chairs
MaterialsStainless Steel
- Set Costes Chairs by Philippe Starck with Black Leather SeatsBy Driade, Philippe StarckLocated in Cape Town, WCThe Costes Chair expresses the multiplicity inherent within the every-day object as a goal for the pursuit of form; owing its wooden, shell-like structure to Starck’s keenness for ex...Category
Vintage 1980s European Post-Modern Chairs
MaterialsSteel
- Set of Stackable 40/4 Chairs By David Rowland in Green and BlackBy Howe, David RowlandLocated in Cape Town, WCRecognised as the first truly stackable chair, the 40/4 Chair is a feat of elegance and ergonomics; encompassing the full range of multi-function that has come to challenge modernist...Category
Vintage 1960s North American Modern Chairs
MaterialsSteel
- Harry Bertoia 2 ChairsBy Harry BertoiaLocated in Lucca, ITHarry Bertoia 2 chairs 1960 .This type of chair by architect Harry Bertoia is an icon of dedign.These two chairs are original and intact .They are suitable for any type of environmen...Category
Vintage 1960s European Mid-Century Modern Chairs
MaterialsMetallic Thread
- Harry Bertoia side chairs by Knoll with original upholstery, mint 1970'sBy Harry BertoiaLocated in Chicago, ILPair of Harry Bertoia side chairs by Knoll International, 1978 Two available, price is per chair. With original blue upholstery. Manufacturer's label dated 1978. New internal foam...Category
Vintage 1970s American Mid-Century Modern Chairs
MaterialsChrome
- Bertoia Chair, Model 420, Harry Bertoia for KnollBy Harry Bertoia, KnollLocated in Neuss, NWBertoia chair, model 420, designed in the 1940s by Harry Bertoia for Knoll. Frame made of wire mesh with a new seat cover in grey. Quality Features: ver...Category
Vintage 1940s American Chairs
MaterialsWire
- BERTOIA Chairs, Model 420, Harry Bertoia for KnollBy Knoll, Harry BertoiaLocated in Neuss, NWBERTOIA chair, model 420, designed in the 1940s by Harry Bertoia for Knoll. Frame made of wire mesh with a new felt cover in grey. The offer includes 4 chair...Category
Vintage 1940s American Bauhaus Chairs
MaterialsMetal
- Diamond Chairs by Harry Bertoia for Knoll InternationalBy Harry Bertoia, KnollLocated in Brussels, BEDiamond chairs by Harry Bertoia for Knoll International, 6 available Sold par piece 1200€.Category
Vintage 1970s European Armchairs
MaterialsChrome
- Diamond Chairs by Harry Bertoia for Knoll InternationalBy Knoll, Harry BertoiaLocated in Brussels, BEDiamond chairs by Harry Bertoia for Knoll International, 6 available Sold par piece 1250€.Category
Vintage 1970s European Armchairs
MaterialsChrome