Plywood

Charles and Ray Eames second generation Zenith shell armchair, black enameled metal legs in X-pattern, large shock mounts, pale yellow fibergla...

Early Charles and Ray Eames for Herman Miller dining chair metal (legs) DCM.

Charles and Ray Eames designed MAX low lounge arm shells with X-base. Original black base and screws in excellent original condition. These are wonderful early transitional parchment...

Eames for Herman Miller IT occasional table with chrome-plated steel, lockable, folding legs suitable for uses such as light dining, card table, computer, or other ancillary use in a...

An early second generation parchment fiberglass arm shell chair with large shock mounts and black iron base in the rare lower lounge height . Having slip on black boot feet of rubber...

Gorgeous set of 4 Herman Miller Eames dining chairs. Vintage fiberglass shells are stamped Herman Miller and guaranteed authentic. Surfaces has been custom recoated in vibrant colors...

This first generation Zenith DAX lounge chair in Lemon yellow was designed by Charles and Ray Eames for Herman Miller. It features the original rope edge beneath the chair, as well a...

This pair of Dars is in great, vintage condition. Both are Zenith plastics first generation rope edge! Read the history of the iconic fiberglass shell armchair and how Zenith was so ...

Charles and Ray Eames aluminum group side chair, EA330 office conference chair in dark olive green upholstery, five-star base, adjust t...

Original 1960s molded fiberglass shell chairs in yellow, designed by Charles and Ray Eames for Herman Miller. Gleaming shells are in original condition, each with a distinct thready ...

Gorgeous set of 4 Herman Miller Eames dining chairs. Vintage fiberglass shells are stamped Herman Miller and guaranteed authentic. Surfaces has been custom recoated in vibrant colors...

Stunning vintage plywood divider by Charles and Ray Eames, for Herman Miller. Model “FSW-6” (folding screen wood) was designed and released to market in 1946. Consists of six adjusta...

Charles Eames for Herman Miller fiberglass DSX shell chair. Circa 1970. Retains all it's plastic glides. Shock mounts are in good condition with no visible drying or cracking. Struct...

DCM chair (Dining metal chair) by Charles and Ray Eames for Herman Miller. Designed in 1946, this molded plywood + chromed steel chair is a classic design. Sometimes referred to as the "potato chip chair...

Very nice early production Charles and Ray Eames designed dining chair metal (DCM ). Clean chrome frame supports ash grain seat and back. Retains original Eames Evans Herman Miller w...

A chair designed in 1958 as outdoor seating still manages to look both classic and contemporary in 21st century interiors. The chairs` clean, trim lines make them appropriate for all...

Charles and Ray married in 1941 and moved to California where they continued their furniture design work with molding plywood. During the war they were commissioned by the Navy to produce molded plywood splints, stretchers and experimental glider shells. In 1946, Evans Products began producing the Eameses` molded plywood furniture. Their molded plywood chair was called "the chair of the century" by the influential architectural critic Esther McCoy. Soon production was taken over by Herman Miller, Inc ., who continues to produce the furniture in the United States to this day. Another company, Vitra International , manufactures the furniture in Europe. The Eameses continued to create new furniture designs into the 1970s. Examples include the molded plastic or fiberglass chairs from the early 1950s and the famous Lounge Chair and Ottoman from 1956. Sturdy, comfortable and elegant office furniture was created in the 1960s, as well as seating designed for Dulles and O`Hare Airports. This Tandem Sling Seating is still in use in airports around the world today. (1) Eames Aluminum Group desk chair...

Early Salmon color Charles and Ray Eames Arm Shell Chair, 2nd generation. X base. Amazing condition, retains clean, crisp gel coat, large domes o...

Early 2nd generation X base translucent arm shell lounge chair by Charles Eames for Herman Miller. Amazing condition, featuring low aluminum X base, large domes of silence shock moun...

A fully adjustable upholstered desk chair having a molded fiberglass body resting on an early four-pronged aluminum base with casters.

Awesome Classic black Eames wire chair on a black eiffel base with the bikini cover for Herman Miller. The bikini cover is missing the button and has a te...

Charles and Ray Eames Charles and Ray married in 1941 and moved to California where they continued their furniture design work with molding plywood. During the war, they were commissioned by the Navy to produce molded plywood splints, stretchers, and experimental glider shells. In 1946, Evans Products began producing the Eameses` molded plywood furniture. Their molded plywood chair was called "the chair of the century" by the influential architectural critic Esther McCoy. Soon production was taken over by Herman Miller, Inc ., who continues to produce the furniture in the United States to this day. Another company, Vitra International, manufactures furniture in Europe. The Eameses continued to create new furniture designs into the 1970s. Examples include the molded plastic or fiberglass chairs from the early 1950s and the famous lounge chair and ottoman from 1956. Sturdy, comfortable and elegant office furniture was created in the 1960s, as well as seating designed for Dulles and O`Hare Airports. This Tandem Sling Seating is still in use in airports around the world today. 1948 designed Herman Miller Eames vinyl...

Four vintage Herman Miller Eames fiberglass chairs in primary colors. All chairs in very good vintage condition with Herman Miller bases available in black or metallic silver color f...

Gorgeous pair of early Eames DCW dining chairs in walnut. An ergonomic dining chair that is attractive as is comfortable to lounge in, like its...

Impeccable molded swiveling armchair by Charles and Ray Eames for Herman Miller. Contractor base model.

This vintage 1940s-1950s Eames LCM chair that is unrestored, the back rubber mounts have been drilled through to connect the back rest. This is a fully functional chair as shown. We...

This is an extremely rare first year Evans production LCM chair designed by Charles and Ray Eames. This LCM has its original red aniline dye finish, chrome finish legs, Evans label a...

An early example of the iconic RAR rocker with a molded, rope-edged fiberglass seat with large shock mounts, made by Zenith Plastics for Herman Miller, set upon cross-braced steel st...

Vintage Eames upholstered DKX wire frame chair for Herman Miller on its original low black base. Item features believed to be an original 1st edition ...

Ray & Charles Eames were commissioned to design the perfect utilitarian seating for the first international airports in 1962. Created for comfort and convenience, this chair is iconi...

The Eames Aluminum Group collection (1958) began as a special project for Eero Saarinen and Alexander Girard, who needed seating for a home they were designing for industrialist J. Irwin Miller in Columbus, Indiana. The pair asked the Eameses to design light, mobile leisure chairs. At the time, Charles and Ray were exploring ways to use aluminum, which had been strengthened, refined and made more affordable since WWII. So, they constructed a lightweight, die-cast aluminum frame and set a sling in it - a “sitting pocket,” as they called it, which subtly conformed to the body’s shape. This completely new type of seat marked a departure from the idea of a chair as solid Pair of restored Herman Miller...

Gorgeous Eames lounge and ottoman in brand new white leather. New shock mounts installed in seat panel ($600 value). All adjustable feet intact. Chair swivels smoothly.

Original 1960s Eames terracotta fiberglass shell chairs with original H bases, designed by Charles and Ray Eames for Herman Miller. The scarce terracotta shell has its original finis...

The Herman Miller Aluminum Group chair has been a staple of the upscale business and home office environment for nearly half a century. It was originally designed by Charles and Ray ...

We are delighted to offer for sale 1 of 4 original fully stamped ICF for Charles Eames, EA105 Hopsak chrome swivel armchairs RRP £2,096 each. Super iconic, award winning, what more can you say, these are pretty much the most comfortable office chairs ever made, these are fully stamped with the model number to the base and the Eames label...

Royal House Antiques Royal House Antiques is delighted to offer for sale 1 of 4 original fully stamped Charles & Ray Eames Hopsak chrome swivel armchairs RRP £2,200 each Please not...

Royal House Antiques is delighted to offer for sale this now discontinued, Limited Edition, Ivory white leather upholstered, American Cherry Wood framed, Vitra Eames lounge armchair ...

We are delighted to offer for sale extremely rare and important lightly restored, original, Herman Miller No1 1960's black leather and Rosewood lounge armchair and ottoman This is...

A pair of vintage original DCW chairs, designed by Charles and Ray Eames for Herman Miller. Early 21st century. Molded plywood in a signature profile. Legs and seat edges a...

We are delighted to offer extremely rare and important pair of fully restored, original, Herman Miller No1 & Herman Miller Hillie circa 1958-1960 black leather and Rosewood lounge armchairs and ottomans These are pretty much the most iconic and well known armchair and ottoman ever made, exhibited countless times, displayed in the V&A, Metropolitan Museum of Art, winners of countless awards these are the simply put the finest suite around They have been on a journey, I’ve had all pieces stripped to the bare shells, the frames have been washed back and traditionally French polished, the leather all restored and hand dyed the original nero black, they are the finest example pair anywhere in the world today One suite has the black Herman Miller No1 label, the other, the earlier redish Herman Miller Hillie label Condition wise, the restoration has been done in such a way to keep all the original charm and patina but make them gallery ready, they will have age and use related patina marks here and there but mostly they are in very fine order Dimensions armchairs Height:- 80.5cm Width:- 85cm Depth:- 86.5cm Seat height:- 41cm Dimensions ottomans Height:- 42cm Width:- 65.5cm Depth:- 53.5cm Please note all measurements are taken at the widest point, MUST READ! The Eames Lounge Chair and ottoman are furnishings made of molded plywood and leather, designed by Charles and Ray Eames for the Herman Miller furniture company. They are officially titled Eames Lounge ( 670 ) and Ottoman ( 671 ) and were released in 1956 after years of development by designers. It was the first chair that the Eameses designed for a high-end market. Examples of these furnishings are part of the permanent collection of New York's Museum of Modern Art. Design Charles and Ray Eames sought to develop furniture that could be mass-produced and affordable, with the exception of the Eames Lounge Chair. This luxury item was inspired by the traditional English club chair. The Eames Lounge Chair is an icon of Modern style design, although when it was first made, Ray Eames remarked in a letter to Charles that the chair looked "comfortable and un-designy". Charles's vision was for a chair with "the warm, receptive look of a well-used first baseman's mitt." The chair is composed of three curved plywood shells covered with veneer: the headrest, the backrest and the seat. The layers are glued together and shaped under heat and pressure. The shells and the seat cushions are essentially of the same shape, and composed of two curved forms interlocking to form a solid mass. The chair back and headrest are identical in proportion, as are the seat and the ottoman. The products have changed in various ways over time. Beginning in 1956 and running through the very early 1990s, the shells were made up of five thin layers of plywood which were covered by a veneer of Brazilian rosewood. The use of Brazilian rosewood was discontinued in the early 1990s, and current production since then consists of seven layers of plywood covered by finishing veneers of cherry, walnut, palisander rosewood (a sustainably grown wood with similar grain patterns to the original Brazilian versions), and other finishes. Small changes include the sets of spacers between the aluminum spines and the wood panels, originally of rubber, later hard plastic washers, and the number of screws securing the armrests, originally three, changed to two in second-series models, while the "domes of silence" (glides/feet) on the chair base originally had thinner screws attaching them to the aluminum base than those on later chairs, and the zipper around the cushions, either brown or black on early models, was later black only. Further, early ottomans had removable rubber slide-on feet with metal glides, and early labels are of oblong foil. History The Eames Lounge Chair first...

We are delighted to offer for sale 1 of 3 original fully stamped Charles & Ray Eames Hopsak chrome swivel armchairs RRP £2,200 each Super iconic, award winning, what more can you say, these are pretty much the most comfortable office chairs ever made, these are fully stamped with the model number to the base and the Eames label...

We are delighted to offer this super rare and highly collectable, original, Mid Century Modern, Herman Miller No1 Edition conference table, which were purchased by the original owner...

Mid Century Modern DSS stacking dining side chairs designed by Ray and Charles Eames for Herman Miller circa 1960s. These collectible molded fiberglass shell seats are available in g...

Parchment fiberglass RAR rocking chair by Charles and Ray Eames and manufactured by Herman Miller. Clean shell with no cracks or holes. Signed Herman Miller and guaranteed authentic....

Arguably the most iconic Midcentury design ever produced, the Eames 670 /671 chaired ottoman remain as important and relevant today as when it was first introduced. This example feat...

A classic and original first edition- ca' 1950s Charles Eames for Herman Miller lounge chair and ottoman, known as 670 and 671. Black leather and rosewood,...

Hard to find single ottoman for the original Herman Miller lounge chair. Sale for ottoman only. Made from cast aluminum, black leather, and Brazilian ros...

Classic Herman Miller fiberglass diamond chair. Designed by Charles and Ray Eames. circa 1970s production. Model DSX. This shade is called “Brilliant Yellow” and is one of the less c...

Classic rosewood and black leather lounge chair and ottoman, 670 & 671 designed by Charles and Ray Eames by Herman Miller, circa 1969, original ...

Marvelous vintage MCM (a.k.a. Mid-Century Modern) Charles & Ray Eames for Herman Miller Aluminum Group high back chair. Comprised of aluminum frame, 4 prong aluminum base, nylon feet, black swivel shaft, black powder coated aluminum arms, & has been reupholstered in an aubergine or eggplant faux suede. Beautiful condition, keeping in mind that this is vintage and not new so will have signs of use and wear. There are some minor scratches on the arms. Please see photos and zoom in for details. We attempt to portray any imperfections. Design Date, 1958. circa, 1960-1978. (We currently have three currently available but priced separately.) I can’t think of anything better than a vintage Charles & Ray Eames for Herman Miller Aluminum Group high back chair!!! Except maybe a purple one!! Aubergine Eggplant, Purple whichever!! WOW!!! It is comprised of an aluminum frame, 4 prong aluminum base with nylon feet, black swivel shaft, black powder coated aluminum arms, and it has been reupholstered in a lovely aubergine or eggplant faux suede fabric. Can we just say Design EXCELLENCE!!!! And not to mention extraordinary comfort! The dynamic design duo of husband and wife team Charles & Ray Eames focused on every detail and combined ergonomics, flexibility, constructive elements, highest quality materials, and attention to superior style which created a masterpiece that is highly sought after still today. The design was introduced in 1958 and is still in production! This vintage beauty will be phenomenal at a desk in an office setting, next to your bed or in the dressing area of your bedroom, or extra seating in the sitting room. It is versatile enough to blend in with many décor styles, but it’s bursting with Mid-Century Modern magnificence!! This treasure is exactly what the designer ordered! Charles Eames was born in St. Louis, Missouri in 1907. Ray Kaiser Eames was born in Sacramento, California in 1912. They met at Cranbrook Academy of Art in Michigan and were married in 1941. They moved together to California and continued their design work they began together at Cranbrook. A commission, which they acquired from the government during WWII to produce molded plywood splints and stretchers, launched a career producing iconic Mid-Century Modern furnishings which are still fresh and sought after today. The Eames and their association with Herman Miller were the partnership of the century. If you want to learn more about Charles and Ray please visit Eames Office, the Eames Official website. Herman Miller started life as Star furniture...

Patinated 1970s production Herman Miller stool in its original finish. 4 matching stools were acquired at the same time from a Grosse Pointe Michigan Estate. This one is often re...

Elephant gray Herman Miller Eames fiberglass shell on rocking base. Excellent grain in the fiberglass side shell and factory dark gray painted back. Stam...

Authentic and iconic Herman Miller / Eames walnut and black leather lounge chair and ottoman (model's 670 & 671), circa 2004. The set are lightly worn and in condition (with the exce...

Sharp set of 4 Eames aluminum group management chairs in gray fabric, with cast aluminum frames. The chairs are all in great, original, clean and ready to use condition, all are mark...

Half-size FSW-6 screen in ash plywood and canvas. Designed by Charles and Ray Eames and manufactured by Herman Miller, Zeeland, MI, circa 1948. Unmarked.

Charles and Ray Eames for Herman Miller time life stool, circa mid-1960s. This solid walnut example has incredible graining and has been newly detai...

Classic Eames Time Life chair for Herman Miller in light grey leather with a polished aluminum frame and legs made in Los Angeles, CA. Originally designed in 1960 by Charles and Ray Eames for use in the lobby of the Time Life building in New York. Recently re-upholstered in gray leather, in-keeping with the color and integrity of other Time-life models. Some slight blemishes to the aluminum frame in-keeping with age. Chair's height and recline is fully adjustable and also swivels 360 degrees. Timeless chair. In 1972, the Time-life chair made the news when notoriously fussy chess genius Bobby Fischer included this chair among his many demands for his legendary 1972 world championship match with Russian master...

LCM (Lounge Chair Metal). Designed 1946. Manufactured by Herman Miller, Zeeland, Michigan, circa 1951-1956. Molded ash plywood with original black aniline dye finish and original blu...

A gorgeous "La Fonda" coffee table designed by Charles and Ray Eames for Herman Miller with original Botticinno marble top and polished aluminum base, circa 1970s. This rare table wa...

For your consideration are up to 40 Aluminium Group Management chairs in black mesh designed by Eames for Herman Miller. All in very good original condition showing minimal wear. Wit...