Skip to main content
Want more images or videos?
Request additional images or videos from the seller
1 of 9

Hans Bergström for Ateljé Lyktan Wall Light in Patinated Copper

$2,450
£1,864.67
€2,156.19
CA$3,477.04
A$3,890.89
CHF 2,024.09
MX$46,882.29
NOK 25,482.30
SEK 24,076.53
DKK 16,094.81

About the Item

Hans Bergström for Ateljé Lyktan, wall lamp, variation on model '1006A', patinated copper, Sweden, 1940s Swedish designer Hans Bergström designed this wall light in the 1940s. As for the material Bergström chose copper that has patinated wonderfully over time. The shade of the wall lamp is perforated with long gaps that allow a beautiful light partition and play of shadows. Another wonderful asset of this design is the multi-functionality of using them indoors or outdoors. Hans Bergström (1910-1996), a luminary figure hailing from the realm of Swedish architecture and design, was born on November 4, 1910, in Karlshamn, Sweden. After his completion of secondary school in 1927, Hans embarked on an internship at Ystad Metall, a local craft industry situated near his grandfather's farm. In 1929, he sought further education and enrolled at the esteemed School of Art and Design in Stockholm. Remarkably, even before his graduation from this institution, at the age of twenty, Hans showcased his prowess as a designer for Ystad Metall at the prestigious Stockholm Exhibition in 1930. In the 1920s, Hans encountered his future wife Verna during the summer holidays in his native town of Karlshamn. In 1934, the couple jointly established the company ateljé Lyktan, a venture that combined their collaborative efforts in luminaire design and various artistic pursuits. Bergström undertook various commissions spanning a wide range of architectural environments, including churches, private residences, and public buildings. It was from this point forward that Bergström spearheaded a revolution in Swedish luminaire manufacturing, fundamentally transforming the perception and application of electric lighting in the coming decades. During the advent of the 1950s, the emergence of plastic as a novel material in modern lighting captured Hans' attention. As the United States gradually introduced plastic as a material of significance, Bergström encountered a method involving the application of sprayed plastic onto a rotating wire frame, facilitated by a spray gun. Interestingly, this technique bore certain resemblances to the later approach employed by Achille & Pier Giacomo Castiglioni in the creation of their Viscontea Lamp (1960), reminiscent of a cocoon, designed for Flos. Recognizing the vast potential offered by this new technology, he successfully managed to get a patent for the production. For a span of three decades, Bergström held the position of creative director at ateljé Lyktan and served as the sole designer of the company until the early 1960s. A significant portion of his designs were unique pieces, numbered but lacking specific names. Through his pioneering work, Bergström emerged as a leading figure in the realm of modern Swedish lighting fixtures. On June 14, 1996, Hans Bergström passed away at the age of 86, leaving behind a remarkable legacy.
  • Creator:
    Hans Bergström (Designer),Ateljé Lyktan (Manufacturer)
  • Dimensions:
    Height: 8.67 in (22 cm)Width: 7.88 in (20 cm)Depth: 11.82 in (30 cm)
  • Style:
    Scandinavian Modern (Of the Period)
  • Materials and Techniques:
  • Place of Origin:
  • Period:
  • Date of Manufacture:
    1940s
  • Condition:
    Wear consistent with age and use. Every item Morentz offers is checked by our team of 30 craftspeople in our in-house workshop. Special restoration or reupholstery requests can be done. Check ‘About the item’ or ask our design specialists for detailed information on the condition.
  • Seller Location:
    Waalwijk, NL
  • Reference Number:
    Seller: 501162861stDibs: LU933146286982

More From This Seller

View All
Hans Bergström for Ateljé Lyktan Wall Light in Patinated Copper
By Ateljé Lyktan, Hans Bergström
Located in Waalwijk, NL
Hans Bergström for Ateljé Lyktan, wall lamp, variation on model '1006A', patinated copper, Sweden, 1940s Swedish designer Hans Bergström designed this wall light in the 1940s. As fo...
Category

Vintage 1940s Swedish Scandinavian Modern Wall Lights and Sconces

Materials

Copper

Hans Bergström for Ateljé Lyktan Wall Light in Patinated Copper
By Ateljé Lyktan, Hans Bergström
Located in Waalwijk, NL
Hans Bergström for Ateljé Lyktan, wall lamp, variation on model '1006A', patinated copper, Sweden, 1940s Swedish designer Hans Bergström designed this wall light in the 1940s. As fo...
Category

Vintage 1940s Swedish Scandinavian Modern Wall Lights and Sconces

Materials

Copper

Hans Bergström for Ateljé Lyktan Wall Light in Patinated Copper
By Ateljé Lyktan, Hans Bergström
Located in Waalwijk, NL
Hans Bergström for Ateljé Lyktan, wall lamp, variation on model '1006A', patinated copper, Sweden, 1940s Swedish designer Hans Bergström designed this wall light in the 1940s. As fo...
Category

Vintage 1940s Swedish Scandinavian Modern Wall Lights and Sconces

Materials

Copper

Hans Bergström for Ateljé Lyktan Wall Light in Patinated Copper
By Ateljé Lyktan, Hans Bergström
Located in Waalwijk, NL
Hans Bergström for Atelje Lyktan, wall light, model '1040', copper, Sweden, 1940s Swedish designer Hans Bergström designed this wall light in the 1940s. As for the material Bergstr...
Category

Vintage 1940s Swedish Scandinavian Modern Wall Lights and Sconces

Materials

Copper

Hans-Agne Jakobsson 'Tratten' Wall Light in Patinated Copper
By Hans-Agne Jakobsson
Located in Waalwijk, NL
Hans-Agne Jakobsson for Hans-Agne Jakobsson AB in Markaryd, wall light ‘Tratten’, copper, Sweden, 1950s Hans-Agne Jakobsson designed this wall light 'Tratten', which is made in a be...
Category

Vintage 1950s Swedish Scandinavian Modern Wall Lights and Sconces

Materials

Copper

Hans-Agne Jakobsson ‘Rulle’ Wall Light in Patinated Copper
By Hans-Agne Jakobsson
Located in Waalwijk, NL
Hans-Agne Jakobsson for Hans-Agne Jakobsson AB in Markaryd, ‘Rulle’ wall light, copper, Sweden, 1960s. Beautiful bright copper ‘Rulle' light by Swedish designer Hans-Agne Jakobsson....
Category

Vintage 1960s Swedish Scandinavian Modern Wall Lights and Sconces

Materials

Copper

You May Also Like

Anders Pehrson, Wall Light, Copper, Sweden, 1960s
By Ateljé Lyktan
Located in High Point, NC
A copper wall light designed by Anders Pehrson and produced by Atelje Lyktan, Sweden, 1960s. Overall Dimensions (inches): 6.78” H x 7.58” W x 10.25” D Back Plate Dimensions (inches)...
Category

Vintage 1960s Swedish Mid-Century Modern Table Lamps

Materials

Copper

Single Sconce by Hans Bergstrom for Ateljé Lyktan
By Ateljé Lyktan
Located in Los Angeles, CA
Single Sconce by Hans Bergstrom for Ateljé Lyktan. Designed and manufactured in Sweden, circa 1960's. Copper, Rewired for U.S. standar...
Category

Vintage 1960s Swedish Mid-Century Modern Wall Lights and Sconces

Materials

Copper

Vintage Scandinavian Wall Light by Hans Bergström, Ateljé Lyktan, Sweden, 1940s
By Hans Bergström, Ateljé Lyktan
Located in Stockholm, SE
Beautiful wall light by Hans Bergström, with a brass frame with decorative knobs suspending the voluminous opaline glass shade. Hans Bergström was the owner and creative director of...
Category

Vintage 1940s Swedish Scandinavian Modern Wall Lights and Sconces

Materials

Brass

Holm-Sörensen Brutalist Copper Wall Lamp Large model Denmark
By Svend Aage Holm Sørensen
Located in Oirlo, LI
This exquisite brass wall sconce, designed by renowned Danish designer Svend Aage Holm Sørensen in the 1960s, showcases handcrafted brass leaves and exceptional craftsmanship. Manu...
Category

Vintage 1960s Danish Scandinavian Modern Wall Lights and Sconces

Materials

Copper

Very rare outdoor copper wall lamp by Hans Bergström for Ateljé Lyktan, 1950s
By Ateljé Lyktan, Hans Bergström
Located in Eskilstuna, SE
Rare outdoor wall lamps by Hans Bergström for Ateljé Lyktan, Sweden, 1950s. These high-quality lamps are made of solid copper with a perforated pattern that looks amazing when lit.
Category

Mid-20th Century Swedish Scandinavian Modern Wall Lights and Sconces

Materials

Copper

Outdoor Copper Wall Lamp by Hans Bergström, Ateljé Lyktan, 1940/50s Sweden
By Ateljé Lyktan, Hans Bergström
Located in Stockholm, SE
Exquisite Outdoor Copper Wall Lamp designed by Hans Bergström for Ateljé Lyktan in 1940/50s Sweden. This exceptionally rare copper lamp, created by the renowned Swedish architect and...
Category

Vintage 1940s Swedish Scandinavian Modern Wall Lights and Sconces

Materials

Copper