Lyby Mobler Freestanding Wall Unit

This is a nine bay Barzilay wall unit by Gerald McCabe of Los Angeles. Oiled walnut with aluminum detail in great condition. We have a variety of ca...

Highly versatile and functional Cado System wall unit in Brazilian rosewood by Danish designer Poul Cadovius. Wall unit can be customized with va...

Highly versatile and functional wall unit in teak by Danish designer Poul Cadovius. The unit shown is an example of what we typically stock. Units are sold by the component- wall r...

We have over 50 pieces of this amazing Barzilay walnut wall unit with aluminum accents. Please contact us for custom pricing and visit our L...

Ergo 4 bay freestanding Wall Unit in teak with black lacquer accents by Blindheim Mobelfabrikk. The “Ergo” system was designed by John Texmon and Einar Blindheim for Blindheim Mobelfabrikk and made in Norway in 1960s. Good vintage condition - ready for use. Located in Brooklyn nyc. All units are interchangeable within each bay to make your own configuration. Current configuration in photos is 130” x 15” x 80” (there is an extra upright not used in photos) Unit Comes with 8x teak shelves with backs 1x teak flip down desk with key 1x 3 drawer teak chest 1x teak glass door...

Versatile freestanding wall-unit/bookcase in oak, walnut, and pine with aluminum, steel, and brass accents by Jitona (1968, Lomnice nad Lužnicí, Czechoslovakia). Five bays can be assembled in total if all pieces are utilized together - seven pine rails, three long shelves, three long cabinets (including one that is half drawers/half open storage), three long glass fronted cabinets, two shorter cabinets, three shorter glass fronted cabinets, and one drop-down cabinet/bar with glass shelves. All cabinet shelves are removable, though not adjustable. Feet for the cabinets and rails are all adjustable, and the disks on the rails offer stability and protection to both floors and ceilings when adjustments are made. The longer pieces displayed as the three bay unit are all 35.25" long, while the shorter pieces displayed as the two bay unit are all 29.5" L. The configuration options for this highly functional unit are limitless. The bar cabinet, five-drawer walnut chest, glass-fronted cabinets, door-fronted cabinets, and two shelves can be custom-assembled based on requirements/aesthetic preference; the shorter pieces just need to be arranged within the same two bays. The legs for all cabinets can be removed, though, depending on the heft of the items displayed/stored, wall-mounting might be required if the weight is too great for the rails alone to adequately support. The 29.38" high cabinets with legs (if using the legs) must be arranged at the bottom, leaving 64.75" of usable rail height for mounting the other pieces. There are some fleabites to the glass (mostly to the edges concealed by the wooden frame when closed) along with light wear the wood consistent with age/use. Conservatively restored and in very fine, vintage condition. Assembled as a 5-bay unit as shown in the fifth image: Measures: H: 105.38" x L: 171" x D: 16". Assembled as a 3-bay unit with the longer pieces: H: 105.38" x L: 109.63" x D: 16" Assembled as a 2-bay until with the shorter pieces: H: 105.38" x L: 62" x D: 15.63" Each piece of the 3-bay system's measurements - * Two cabinets with doors: Exterior - H: 29.38" (with legs) / 18.5" (without) x L: 35.25" x D: 15.75" / 16.75" (with pls) Interior - Height above the shelf: 7.25" / below 8.25" x L: 34" x D: (shelf) 13.25" / lower surface 14.25" * Drawers: Exterior - H: 29.38" (with legs) / 18.5" (without) x L: 17.5" x D: 15.75" / 16.75" (with drawer pls) Interior (each drawer) - H: 2" x L: 15.38" x D: 13.25" * Small cabinet: Exterior - H: 29.38" (with legs) / 18.5" (without) x L: 17.5" x D: 15.75" / 16.75" (with pls) Interior - Height above the shelf: 8.25" / below 8.25" x L: 16" x D: 14.38" * Glass-fronted cabinets: Exterior - H: 24.5" x L: 35.25" x D: 9.75" Interior - Height above the shelf: 11" / below 11.5" x L: 34" x D: (shelf) 8" / lower surface 9" * Three shelves - H: 0.63" x L: 35.25" x D: 9.75" Each piece of the 2-bay system's interior measurements - * Two cabinets with doors: Exterior - H: 29.75" (with legs) / 18.63" (without) x L: 29.5" x D: 15.63" / 16.63" (with drawer pls) Interior - Height above the shelf: 8" / below 8.5" x L: 28" x D: (shelf) 13.13" / lower surface 14.38" * Glass-fronted cabinets: Exterior - H: 24.25" x L: 29.5" x D: 10" Interior - Height above the shelf: 11.13" / below 11.25" x L: 28" x D: (shelf) 7.75" / lower surface 8.13" * Bar cabinet: Exterior - H: 18.25" x L: 29.5" x D: 10" / 25.88" (when open) Interior - Height (excluding shelves): 16.88" x L: (left side) 9" / (right side) 18.5" x D: 7.75" (shelf) Rails alone: H: 105.38" (the height can be adjusted via a rail extender to, which will be included, and can be increased to 108") x L: 0.88" x D: 5" Cabinet legs...

Impressive freestanding teak modular wall unit providing multiple storage and configuration options. The three base and upper cabinets can be arranged as shown or as individual stand...

Brazilian rosewood wall system designed by Kai Kristiansen for Feldballes Møbelfabrik Denmark. FM-Reolsystem is a fully interchangeable wall mount shelving system. Crafted in rosewoo...