Mexico - Shelves and Wall Cabinets

Plump Resin Floating Wall Console, Ian Cochran, Represented by Tuleste Factory This resin console by Ian Cochran is mounted into the wall to give the piece an overall floating effec...

The Minimalist wall-mounted, 30" wide, deep 2G shelf is sculpted out of 1/4 inch thick, wax-polished aluminum. Each shelf has an inset welded U-channel that spans the length of the shelf and easily mounts on included custom-bent steel Z-clips. Each bay of this modernist shelf...

Plump Crystal Clear Floating Wall Console by Ian Cochran, Rep by Tuleste Factory A continuation of the Plump series of sculptural furniture. The shapes play upon the effect that res...

1950s Eugenio Escudero extravagant custom piece desk dry bar wall unit system. Fabulous piece entertainment receiving desk social mingle center. Unmarked attribution Eugenio Escuder...

Biomorphic wall console by Jacques Jarrige. The drawer opens with an inverted handle sculpted under the apron. Beautifully crafted with the unm...

circa 1960 Italian Gilt Iron Rope & Tassle Wall Shelves sku 1358 H48 x W67 x D18cm

Recently imported from Italy, this is a good example of post war Italian Avant Garde design. Measuring an impressive 3-metres from floor to ceiling – a common height in Italian apartments – with opportunity to arrange the shelves to suit. This impressive freestanding storage...

Versatile freestanding wall-unit/bookcase in oak, walnut, and pine with aluminum, steel, and brass accents by Jitona (1968, Lomnice nad Lužnicí, Czechoslovakia). Five bays can be assembled in total if all pieces are utilized together - seven pine rails, three long shelves, three long cabinets (including one that is half drawers/half open storage), three long glass fronted cabinets, two shorter cabinets, three shorter glass fronted cabinets, and one drop-down cabinet/bar with glass shelves. All cabinet shelves are removable, though not adjustable. Feet for the cabinets and rails are all adjustable, and the disks on the rails offer stability and protection to both floors and ceilings when adjustments are made. The longer pieces displayed as the three bay unit are all 35.25" long, while the shorter pieces displayed as the two bay unit are all 29.5" L. The configuration options for this highly functional unit are limitless. The bar cabinet, five-drawer walnut chest, glass-fronted cabinets, door-fronted cabinets, and two shelves can be custom-assembled based on requirements/aesthetic preference; the shorter pieces just need to be arranged within the same two bays. The legs for all cabinets can be removed, though, depending on the heft of the items displayed/stored, wall-mounting might be required if the weight is too great for the rails alone to adequately support. The 29.38" high cabinets with legs (if using the legs) must be arranged at the bottom, leaving 64.75" of usable rail height for mounting the other pieces. There are some fleabites to the glass (mostly to the edges concealed by the wooden frame when closed) along with light wear the wood consistent with age/use. Conservatively restored and in very fine, vintage condition. Assembled as a 5-bay unit as shown in the fifth image: Measures: H: 105.38" x L: 171" x D: 16". Assembled as a 3-bay unit with the longer pieces: H: 105.38" x L: 109.63" x D: 16" Assembled as a 2-bay until with the shorter pieces: H: 105.38" x L: 62" x D: 15.63" Each piece of the 3-bay system's measurements - * Two cabinets with doors: Exterior - H: 29.38" (with legs) / 18.5" (without) x L: 35.25" x D: 15.75" / 16.75" (with pls) Interior - Height above the shelf: 7.25" / below 8.25" x L: 34" x D: (shelf) 13.25" / lower surface 14.25" * Drawers: Exterior - H: 29.38" (with legs) / 18.5" (without) x L: 17.5" x D: 15.75" / 16.75" (with drawer pls) Interior (each drawer) - H: 2" x L: 15.38" x D: 13.25" * Small cabinet: Exterior - H: 29.38" (with legs) / 18.5" (without) x L: 17.5" x D: 15.75" / 16.75" (with pls) Interior - Height above the shelf: 8.25" / below 8.25" x L: 16" x D: 14.38" * Glass-fronted cabinets: Exterior - H: 24.5" x L: 35.25" x D: 9.75" Interior - Height above the shelf: 11" / below 11.5" x L: 34" x D: (shelf) 8" / lower surface 9" * Three shelves - H: 0.63" x L: 35.25" x D: 9.75" Each piece of the 2-bay system's interior measurements - * Two cabinets with doors: Exterior - H: 29.75" (with legs) / 18.63" (without) x L: 29.5" x D: 15.63" / 16.63" (with drawer pls) Interior - Height above the shelf: 8" / below 8.5" x L: 28" x D: (shelf) 13.13" / lower surface 14.38" * Glass-fronted cabinets: Exterior - H: 24.25" x L: 29.5" x D: 10" Interior - Height above the shelf: 11.13" / below 11.25" x L: 28" x D: (shelf) 7.75" / lower surface 8.13" * Bar cabinet: Exterior - H: 18.25" x L: 29.5" x D: 10" / 25.88" (when open) Interior - Height (excluding shelves): 16.88" x L: (left side) 9" / (right side) 18.5" x D: 7.75" (shelf) Rails alone: H: 105.38" (the height can be adjusted via a rail extender to, which will be included, and can be increased to 108") x L: 0.88" x D: 5" Cabinet legs...

A hand carved wall console with mahogany finish and aqua blue interior open drawer. Unique piece Consoles can be commissioned to size requirements Jacques Jarrige is a sculpt...

Introducing an extraordinary mid-century wall-mounted floating three-tier console, a sought-after piece designed by the esteemed Paul McCobb for Bryce Originals in the 1950s. With it...

Gorgeous pair of Mid-Century organic shelves made in bamboo, rattan and hand-woven wicker. Vivai del Sud likely designed this beautiful shelves in Italy during the 1970s. This stun...

This extraordinary wall console, designed by Dino Cavalli for Tredici & C. Pavia, perfectly exemplifies the elegance and functionality that characterize high-quality Italian craftsma...