How high should a dining table be?

How high a dining table should be varies. If you already have your dining chairs, look for a table that is 10 to 12 inches taller than the seat height to provide ample legroom. The standard height for dining tables is around 30 inches. However, you can opt for taller pieces, such as 34- to 36-inch counter-height tables or 40- to 42-inch bar-height tables. Shop a large selection of dining tables on 1stDibs.

What is a dining table with leaf?

A dining table with leaf is a dining table that has its middle part as solid and remains in place, but the two sides of the table drop down on a hinge, so they hang at the side. This is where the name 'drop leaf' comes from. Many homeowners have decided to go with leaf tables as they offer a lot of flexibility to their homes. On 1stDibs, you can find a variety of dining table options as well as a range of vintage and antique drop-leaf tables.

What is an MCM dining table?

An MCM dining table is a table that reflects the mid-century modern style. Typically these tables are functional and have clean minimalist lines. MCM furniture is made with a variety of materials and colors, but wood is the most common. Find a selection of mid-century modern tables and furniture on 1stDibs.

How thick should a dining table be?

How thick a dining table should be varies. Many tables feature tops that are between 0.75 and 1 inch in thickness. However, some tables may have tops that are up to 2 inches thick. Typically, tables with thicker tops will have a more rustic appearance. Shop a large selection of dining tables on 1stDibs.

Is a dining table necessary?

No, a dining table isn't always necessary. People who eat only a few meals at home may not need a dining table, and some people prefer to eat at kitchen counters using counter-height stools. Or, they may choose to sit on the floor in front of a coffee table or to take their meals at a desk or on a TV tray or end table. On 1stDibs, shop a diverse assortment of dining tables.

How wide should a dining table be?

How wide a dining table should be largely depends on its shape. Most rectangular and oval dining tables are 36 to 40 inches wide. Round table widths or diameters vary and will determine how many people can sit comfortably at one time. Generally, a round table 36 to 44 inches in width is ideal for up to four people, while ones that are 44 to 54 inches in diameter can accommodate four to six. Tables between 54 and 59 inches in width are suitable for six to eight people. On 1stDibs, shop a wide range of dining tables.

What is the height of a dining table?

The height of a dining table varies from piece to piece. However, standard dining tables are usually 28 to 30 inches tall. Counter-height tables are taller at 34 to 36 inches, and bar-height tables are the highest at 40 to 42 inches high. On 1stDibs, shop a wide range of dining tables from some of the world's top sellers.

What is the best dining table?

Dining tables come in a huge variety of styles and are often chosen according to individual preference. The best dining tables are ones that are sturdy, well-made and able to withstand wear and tear. You should also consider your space limitations as well as budget. Find a versatile collection of antique and vintage dining tables on 1stDibs today.

What is the narrowest A dining table can be?

The narrowest a dining table can be is 36 inches. This leaves 18 inches of space for each of the guests on the opposite side of the table, as well as room in the center for serving dishes or platters. Find a collection of antique and vintage dining tables on 1stDibs today.

What is a small dining table called?

A small dining table is also called a dinette. A table and two to four seats are frequently included. Designed for small spaces, dinettes are most often used in kitchens and breakfast nooks. On 1stDibs, find a variety of vintage and antique dinettes.

Is mahogany good for a dining table?

Whether mahogany is good for a dining table is largely a matter of personal preference. Some people may prefer the hardwood for their dining room furniture owing to its natural beauty, durability and stain-resistant qualities. Mahogany also features a striking natural grain that renders it ideal for use in that part of your home, specifically as dinner guests will be able to experience it! Shop a range of mahogany dining tables on 1stDibs.

What is a drop leaf dining table?

A drop-leaf table is a type of table that has a fixed portion in the center and foldable portions on either side joined by hinges. These foldable portions can be dropped and closed to save space when the table is not in use. On 1stDibs, find a variety of antique and vintage drop leaf dining tables.

How do I protect my maple dining table?

To protect your maple dining table, use placemats or a tablecloth to reduce the risk of scratches. Always place a trivet underneath hot serveware to avoid scorching the finish. Set glasses on coasters to keep rings off the wood. Shop a selection of vintage and antique dining tables on 1stDibs.

What are large dining tables called?

Large dining tables are usually called banquet tables due to their ability to seat a crowd. Normally, banquet tables measure over 10 feet in length. Some standard dining tables convert to banquet tables with removable leaves. On 1stDibs, shop a variety of antique and vintage dining tables.

What is the most durable material for a dining table?

There isn’t a single most durable material for a dining table. Solid hardwood and stainless steel can hold up to wear and tear, but the quality of the craftsmanship also impacts durability. Find a variety of dining tables on 1stDibs.

What type of dining table is the most durable?

There is no single most durable type of dining table. Materials like solid hardwood, stone and marble can make for long-lasting tables, but other factors like how you care for the piece and how well it's made also help determine durability. On 1stDibs, shop a variety of dining tables from some of the world's top sellers.

Is onyx good for a dining table?

Yes, onyx can be a good material for a dining table. The mineral is strong, but it is relatively lightweight, making tables easy to move throughout a room as needed. Many people find the color and luster of onyx tabletops to be visually appealing. Since the material can become scratched or damaged by heat, it is important to take steps to protect an onyx dining table by using felt-backed trivets or heat-resistant fabric mats beneath hot dishes. On 1stDibs, explore a collection of onyx dining tables.

Do chairs have to match the dining table?

Dining room chairs and dining tables do not necessarily have to match.

Should a buffet be longer than a dining table?

No, a buffet usually shouldn't be longer than a dining table . Most experts recommend that you choose a buffet that is the same length or slightly shorter than your dining table. Keeping the two pieces in proportion with each other creates balance within a space.Find vintage and antique dining tables on 1stDibs.

How tall is the typical dining table?

Dining room tables are typically 30 inches high.

Dining Table Models

Shaker Drop Leaf Table

Stickley Trestle Table

Category

Vintage 1950s American Dining Room Tables

Materials

Bronze

Dan Johnson Gazelle Dining Table, model 33B

H 28.75 in W 60 in D 38.75 in

Bertil Fridhagen Dining Table Model Diamant Produced by Bodafors

By Bertil Fridhagen

Located in Limhamn, Skåne län

Rare dining table model Diamant designed by Bertil Fridhagen. Produced by Bodafors in Sweden

Category

Vintage 1960s Swedish Scandinavian Modern Dining Room Tables

Materials

Walnut

Bertil Fridhagen Dining Table Model Diamant Produced by Bodafors

H 28.55 in W 45.28 in D 45.28 in

Hans Wegner Drop-Leaf Dining Table, Model AT304

By Hans J. Wegner

Located in Los Angeles, CA

Beautiful Hans Wegner for Andreas Tuck drop-leaf dining table, model AT304, in perfect condition

Category

Mid-20th Century Danish Mid-Century Modern Dining Room Tables

Materials

Brass

Hans Wegner Drop-Leaf Dining Table, Model AT304

H 28 in W 52.5 in D 33.75 in

Arne Vodder Dining Table Model 227 Produced by Sibast in Denmark

By Arne Vodder

Located in Limhamn, Skåne län

Rare dining table model 227 designed by Arne Vodder. Produced by Sibast in Denmark. Measure

Category

Vintage 1950s Danish Scandinavian Modern Dining Room Tables

Materials

Brass

Arne Vodder Dining Table Model 227 Produced by Sibast in Denmark

H 28.55 in W 30.52 in D 41.74 in

Erik Riisager Hansen Dining Table Model 71 Produced by Haslev Møbelsnedkeri

By Erik Riisager Hansen 1

Located in Limhamn, Skåne län

Dining table model 71 designed by Erik Riisager Hansen. Produced by Haslev Møbelsnedkeri in Denmark

Category

Vintage 1960s Danish Scandinavian Modern Dining Room Tables

Materials

Rosewood

Erik Riisager Hansen Dining Table Model 71 Produced by Haslev Møbelsnedkeri

H 28.35 in W 46.46 in D 46.46 in

Josef Frank Dining Table Model 1020 Produced by Svenskt Tenn in Sweden

By Josef Frank

Located in Limhamn, Skåne län

Rare dining table model 1020 designed by Josef Frank. Produced by Svenskt Tenn in Sweden.

Category

Vintage 1960s Swedish Scandinavian Modern Dining Room Tables

Materials

Boxwood, Walnut

Josef Frank Dining Table Model 1020 Produced by Svenskt Tenn in Sweden

H 28.15 in W 56.3 in D 56.3 in

Josef Frank Dining Table Model 1020 Produced by Svenskt tenn in Sweden

By Josef Frank

Located in Limhamn, Skåne län

Rare dining table model 1020 designed by Josef Frank. Produced by Svenskt tenn in Sweden.

Category

Vintage 1940s Swedish Scandinavian Modern Dining Room Tables

Materials

Mahogany, Amboyna

Josef Frank Dining Table Model 1020 Produced by Svenskt tenn in Sweden

H 28.35 in W 57.09 in D 57.09 in

Hans Wegner Dining Table Model AT-309 by Andreas Tuck in Denmark

By Hans J. Wegner

Located in Limhamn, Skåne län

Rare dining table model AT-309 designed by Hans Wegner. Produced in Andreas Tuck in Denmark.

Category

Vintage 1950s Danish Scandinavian Modern Dining Room Tables

Materials

Brass

Hans Wegner Dining Table Model AT-309 by Andreas Tuck in Denmark

H 28.35 in W 51.97 in D 33.86 in

Finn Juhl Dining Table Model NV-56 by Niels Vodder in Denmark

By Finn Juhl

Located in Limhamn, Skåne län

Very rare dining table model NV-56 designed by Finn Juhl. Produced by cabinetmaker Niels Vodder in

Category

Vintage 1950s Danish Scandinavian Modern Dining Room Tables

Materials

Teak

Finn Juhl Dining Table Model NV-56 by Niels Vodder in Denmark

H 27.96 in W 92.52 in D 49.22 in

Hans Wegner Dining Table Model JH-570 by Johannes Hansen in Denmark

By Hans J. Wegner

Located in Limhamn, Skåne län

Very rare dining table model JH-570 designed by Hans Wegner. Produced by cabinetmaker Johannes

Category

Vintage 1950s Danish Scandinavian Modern Dining Room Tables

Materials

Brass

Hans Wegner Dining Table Model JH-570 by Johannes Hansen in Denmark

H 28.75 in W 106.3 in D 39.38 in

Arne Vodder Dining Table Model 201 Produced by Sibast Møbelfabrik in Denmark

By Arne Vodder

Located in Limhamn, Skåne län

Rare dining table model 201 designed by Arne Vodder. Produced by Sibast Møbelfabrik in Denmark

Category

Vintage 1960s Danish Scandinavian Modern Dining Room Tables

Materials

Rosewood

Arne Vodder Dining Table Model 201 Produced by Sibast Møbelfabrik in Denmark

H 27.96 in W 78.75 in D 40.56 in

Elmwood Circular Dining Table Model T21D by Pierre Chapo

By Pierre Chapo

Located in Montreal, QC

Elmwood circular dining Table model T21D by Pierre Chapo. After the war, he passed the entrance

Category

Vintage 1960s French Dining Room Tables

Materials

Elm

Elmwood Circular Dining Table Model T21D by Pierre Chapo

H 28.25 in Dm 53.5 in

Mid-Century Modern Carlo De Carli Dining Table Model 180, Sormani, Italy, 1960s

By Carlo De Carli

Located in Brussels, BE

Mid-Century Modern Carlo De Carli Dining Table Model 180, Sormani, Italy, 1960s

Category

Vintage 1960s Italian Mid-Century Modern Dining Room Tables

Materials

Wood

Mid-Century Modern Carlo De Carli Dining Table Model 180, Sormani, Italy, 1960s

H 29.93 in Dm 59.06 in

Hans Wegner Dining Table Model AT-312 Produced by Andreas Tuck in Denmark

By Hans J. Wegner

Located in Limhamn, Skåne län

Dining table model AT-312 designed by Hans Wegner. Produced by Andreas Tuck in Denmark.

Category

Vintage 1950s Danish Scandinavian Modern Dining Room Tables

Materials

Oak, Teak

Hans Wegner Dining Table Model AT-312 Produced by Andreas Tuck in Denmark

H 28.35 in W 55.12 in D 35.44 in

Shaker Dining Table, Model C18, Soap-Treated Oak, Børge Mogensen, 1960s

By Børge Mogensen

Located in Lejre, DK

Shaker dining table, model C18, in solid soap-treated oak designed by Børge Mogensen in 1947 and

Category

Vintage 1960s Danish Mid-Century Modern Dining Room Tables

Materials

Oak

Shaker Dining Table, Model C18, Soap-Treated Oak, Børge Mogensen, 1960s

H 27.56 in W 76.78 in D 38.59 in

Gunni Omann Dining Table Model 55 Produced by Omann Jun Møbelfabrik in Denmark

By Gunni Omann

Located in Limhamn, Skåne län

Dining table model 55 designed by Gunni Omann. Produced by Omann Jun Møbelfabrik in Denmark. Width

Category

Vintage 1960s Danish Scandinavian Modern Dining Room Tables

Materials

Rosewood

Gunni Omann Dining Table Model 55 Produced by Omann Jun Møbelfabrik in Denmark

H 27.96 in W 47.25 in D 47.25 in

Mid modern Scandinavian oak dining table model Shaker C18 by Borge Mogensen

By Børge Mogensen

Located in Courbevoie, FR

Mid modern Scandinavian oak dining table model Shaker C18 by Borge Mogensen for FDB Møbler

Category

Vintage 1950s Scandinavian Scandinavian Modern Dining Room Tables

Materials

Oak

Mid modern Scandinavian oak dining table model Shaker C18 by Borge Mogensen

H 27.96 in W 61.82 in D 31.5 in

Hans Wegner Dining Table Model AT-312 Produced by Andreas Tuck in Denmark

By Hans J. Wegner

Located in Limhamn, Skåne län

Dining table model AT-312 designed by Hans Wegner. Produced by Andreas Tuck in Denmark. Dimensions

Category

Vintage 1950s Danish Scandinavian Modern Dining Room Tables

Materials

Oak, Teak

Hans Wegner Dining Table Model AT-312 Produced by Andreas Tuck in Denmark

H 27.96 in W 63 in D 39.38 in

Poul Kjærholm Dining Table Model PK-54 by E. Kold Christensen in Denmark

By Poul Kjærholm

Located in Limhamn, Skåne län

Rare dining table model PK-54 designed by Poul Kjærholm. Produced by E. Kold Christensen in Denmark

Category

Vintage 1960s Danish Scandinavian Modern Dining Room Tables

Materials

Marble, Steel

Poul Kjærholm Dining Table Model PK-54 by E. Kold Christensen in Denmark

H 25.6 in W 55.12 in D 55.12 in

Niels O. Møller Dining Table Model 254 in Rosewood by J.L. Møllers Møbelfabrik

By Niels Otto Møller

Located in Limhamn, Skåne län

Rare dining table model 254 designed by Niels O. Møller. Produced by J.L Møllers møbelfabrik in

Category

Vintage 1950s Danish Scandinavian Modern Dining Room Tables

Materials

Rosewood

Niels O. Møller Dining Table Model 254 in Rosewood by J.L. Møllers Møbelfabrik

H 29.14 in W 108.67 in D 39.38 in

Niels O. Møller Dining Table Model 254 by J.L Møllers Møbelfabrik in Denmark

By Niels Otto Møller

Located in Limhamn, Skåne län

Rare dining table model 254 designed by Niels O. Møller. Produced by J.L Møllers møbelfabrik in

Category

Vintage 1960s Danish Scandinavian Modern Dining Room Tables

Materials

Rosewood

Niels O. Møller Dining Table Model 254 by J.L Møllers Møbelfabrik in Denmark

H 28.75 in W 70.87 in D 40.95 in

Dining table model 227 designed by Arne Vodder for Sibast, Denmark, 1950s

By Arne Vodder

Located in Stockholm, SE

Dining table model 227 designed by Arne Vodder for Sibast, Denmark, 1950s. Rosewood. Stamped. H

Category

Vintage 1950s Danish Mid-Century Modern Dining Room Tables

Materials

Rosewood

Dining table model 227 designed by Arne Vodder for Sibast, Denmark, 1950s

H 28.35 in W 77.96 in D 41.74 in

Vintage round marble dining table model T69 by Osvaldo Borsani for Tecno, 1970s

By Tecno, Osvaldo Borsani

Located in HEVERLEE, BE

Gorgeous vintage dining table model T69 designed by Osvaldo Borsani made from a brushed metal and

Category

Vintage 1970s Italian Mid-Century Modern Dining Room Tables

Materials

Marble, Metal

Vintage round marble dining table model T69 by Osvaldo Borsani for Tecno, 1970s

H 28.75 in Dm 47.25 in

Dining Table Model M5 Designed By Frank In 2006 Made By Established & Sons

By Established & Sons

Located in Lejre, DK

The Dining Table, model M5, embodies the contemporary elegance and innovative design associated

Category

2010s European Other Dining Room Tables

Materials

Wood

Dining Table Model M5 Designed By Frank In 2006 Made By Established & Sons

H 28.75 in W 86.62 in D 35.44 in

1930's Original French Café Table, Rectangular Dining Table 'Model 1114.2'

Located in Hook, Hampshire

1930’s original french cafe table – rectangular dining table (model 1114.2) 1930’s original

Category

Vintage 1930s French Dining Room Tables

Materials

Oak

1930's Original French Café Table, Rectangular Dining Table 'Model 1114.2'

H 29.93 in W 54.34 in D 22.84 in

1930's Original French Café Table, Rectangular Dining Table 'Model 1114.1'

Located in Hook, Hampshire

1930’s original French cafe table – rectangular dining table (Model 1114.1) 1930’s original French

Category

Vintage 1930s French Dining Room Tables

Materials

Oak

1930's Original French Café Table, Rectangular Dining Table 'Model 1114.1'

H 29.93 in W 54.34 in D 22.84 in

Shaker Dining Table, Model C18, of Soap Treated Oak Designed by Børge Mogensen

By Børge Mogensen

Located in Lejre, DK

Exquisite Shaker Dining Table, Model C18, a timeless creation by the visionary designer Børge

Category

Vintage 1960s Danish Mid-Century Modern Dining Room Tables

Materials

Oak

Shaker Dining Table, Model C18, of Soap Treated Oak Designed by Børge Mogensen

H 27.96 in W 78.75 in D 35.44 in

Dining Table Model “Corinto” by Ferdinando Meccani, Italy 1978

By Ferdinando Meccani

Located in Hellouw, NL

Dining table model “Corinto” by Ferdinando Meccani for Meccani Arredamento.An anything but modest

Category

Vintage 1970s Italian Mid-Century Modern Dining Room Tables

Materials

Cherry, Glass

Dining Table Model “Corinto” by Ferdinando Meccani, Italy 1978

H 29.53 in W 53.15 in D 53.15 in

1963 Florence Knoll "T" Angle Dining Table, Model 309 in White Laminate

By Knoll, Florence Knoll

Located in Philadelphia, PA

This is an original T Angle dining table, Model 309, designed by Florence Knoll for Knoll

Category

Vintage 1960s American Modern Dining Room Tables

Materials

Steel

1963 Florence Knoll "T" Angle Dining Table, Model 309 in White Laminate

H 28 in W 34 in D 34 in

1950s Original French T55 Tolix Rectangular, Kitchen, Dining Table, Model 2

By Xavier Pauchard

Located in Hook, Hampshire

1950s Original French T55 Tolix Rectangular Cafe – Kitchen – Dining Table (Model 2) 1950s

Category

Vintage 1950s French Dining Room Tables

Materials

Metal

1950s Original French T55 Tolix Rectangular, Kitchen, Dining Table, Model 2

H 29.53 in W 20.48 in D 34.65 in

1950s Original French T55 Tolix Rectangular, Kitchen, Dining Table 'Model 8'

By Xavier Pauchard

Located in Hook, Hampshire

1950s Original French T55 Tolix rectangular cafe - kitchen - dining table (Model 8) 1950s

Category

Vintage 1950s French Dining Room Tables

Materials

Metal

1950s Original French T55 Tolix Rectangular, Kitchen, Dining Table 'Model 8'

H 29.53 in W 20.48 in D 34.65 in

1950s Original French T55 Tolix Rectangular, Kitchen, Dining Table 'Model 7'

By Xavier Pauchard

Located in Hook, Hampshire

1950s original French T55 Tolix rectangular cafe – Kitchen – Dining table (Model 7) 1950s

Category

Vintage 1950s French Dining Room Tables

Materials

Metal

1950s Original French T55 Tolix Rectangular, Kitchen, Dining Table 'Model 7'

H 29.53 in W 20.48 in D 34.65 in

1950s Original French T55 Tolix Rectangular, Kitchen, Dining Table 'Model 11'

By Xavier Pauchard

Located in Hook, Hampshire

1950s original French T55 Tolix rectangular cafe, kitchen, dining table (Model 11) 1950s

Category

Vintage 1950s French Dining Room Tables

Materials

Metal

1950s Original French T55 Tolix Rectangular, Kitchen, Dining Table 'Model 11'

H 29.53 in W 20.48 in D 34.65 in

1950s Original French T55 Tolix Rectangular, Kitchen, Dining Table 'Model 4'

By Xavier Pauchard

Located in Hook, Hampshire

1950s original French T55 Tolix rectangular, kitchen, dining table (Model 4) 1950s original

Category

Vintage 1950s French Dining Room Tables

Materials

Metal

1950s Original French T55 Tolix Rectangular, Kitchen, Dining Table 'Model 4'

H 29.53 in W 20.48 in D 34.65 in

Vintage Plate Glass and Chrome Dining Table Model 6060 by Leon Rosen for Pace

By Leon Rosen, Pace Collection

Located in Brooklyn, NY

Stylish and sophisticated dining table (model 6060) designed by Leon Rosen for the Pace Collection

Category

Vintage 1970s American Mid-Century Modern Dining Room Tables

Materials

Chrome

Vintage Plate Glass and Chrome Dining Table Model 6060 by Leon Rosen for Pace

H 29.25 in W 72 in D 44 in

Arne Vodder Dining Table Model 201 by Sibast Møbelfarbik, Denmark, 1960s

By Arne Vodder, Sibast

Located in Aachen, NW

Fine and rare dining table Model 201 by Arne Vodder for Sibast Mobelfabrik. The table was made

Category

Vintage 1960s Danish Tables

Materials

Wood

Arne Vodder Dining Table Model 201 by Sibast Møbelfarbik, Denmark, 1960s

H 27.96 in W 78.75 in D 40.56 in

Carlo Scarpa, Small Dining Table Model “Quatour”, Walnut, Italy 1974

By Carlo Scarpa

Located in Barcelona, ES

Carlo Scarpa Dining table model “Quatour” Manufactured by Simon Gavina Italy, 1974 Walnut wood

Category

Vintage 1970s Italian Dining Room Tables

Materials

Walnut

Carlo Scarpa, Small Dining Table Model “Quatour”, Walnut, Italy 1974

H 28.35 in W 55.52 in D 55.52 in

Børge Mogensen Dining Table model "753", 1950s

By Børge Mogensen

Located in Stockholm, SE

Produced in Sweden by Lammhults Möbler, 1950s. Very good condition.

Category

Vintage 1950s Swedish Scandinavian Modern Dining Room Tables

Materials

Brass

Børge Mogensen Dining Table model "753", 1950s

H 27.96 in W 63 in D 35.44 in

Contemporary dining table model "Table B" Aluminum Silver Top Wooden legs

By Konstantin Grcic

Located in Barcelona, ES

Dining table model "Table B" 90cm x 180cm The Table B, which inaugurated the Extrusions Collection

Category

21st Century and Contemporary Spanish Modern Dining Room Tables

Materials

Aluminum

Contemporary dining table model "Table B" Aluminum Silver Top Wooden legs

H 29.14 in W 70.87 in D 35.44 in

Bendt Winge Drop-Leaf Dining Table Model Nr 4 by Kleppes Møbelfabrikk in Norway

Located in Limhamn, Skåne län

Rare drop-leaf dining table model nr 4 designed by Bendt Winge. Produced by Kleppes Møbelfabrikk in

Category

Vintage 1950s Norwegian Scandinavian Modern Drop-leaf and Pembroke Tables

Materials

Rosewood

Bendt Winge Drop-Leaf Dining Table Model Nr 4 by Kleppes Møbelfabrikk in Norway

H 28.75 in W 59.06 in D 34.65 in

Roger Rougier Extension Dining Table Model 3600-50

By Roger Rougier

Located in Hanover, MA

Model 3600-50 extension dining table by Roger Rougier consisting of a 44 inch diameter round

Category

Vintage 1980s Canadian Post-Modern Dining Room Tables

Materials

Wood

Roger Rougier Extension Dining Table Model 3600-50

H 29.5 in W 95 in D 44 in

Niels Moller Dining Table Model 15 Denmark 1960

By Niels Otto Møller

Located in Roosendaal, Noord Brabant

Exquisite Model 15 dining table by designer Niels Moller, and manufactured in Denmark by J.L

Category

Vintage 1960s Danish Scandinavian Modern Dining Room Tables

Materials

Rosewood

Niels Moller Dining Table Model 15 Denmark 1960

H 28.75 in W 68.12 in D 48.04 in

Alvar Aalto, Dining Table Model 92, 1940s, Artek

By Alvar Aalto, Artek

Located in Helsinki, FI

This is a beautiful extending table model 92 by Alvar Aalto from 1940s. Body of the table is solid

Category

Vintage 1940s Finnish Scandinavian Modern Dining Room Tables

Materials

Birch, Oak

Alvar Aalto, Dining Table Model 92, 1940s, Artek

H 29.53 in W 88.19 in D 35.44 in

Roland Wilhemsson Dining Table, Model RW152, Scandinavian Design

By Roland Wilhelmsson

Located in Lyon, FR

Large round table made of pine by Roland Wilhemsson. Thickness to the top 5.5 cm.

Category

Vintage 1960s Swedish Scandinavian Modern Dining Room Tables

Materials

Pine

Roland Wilhemsson Dining Table, Model RW152, Scandinavian Design

H 27.96 in Dm 59.06 in

Solid oak dining table model 6288 by Børge Mogensen, Fredericia, Denmark 1960s

By Fredericia Stolefabrik, Børge Mogensen

Located in Hägersten, SE

Dining table model 6288 designed by Børge Mogensen. Produced in Denmark by Fredericia Stolefabrik

Category

Vintage 1960s Danish Scandinavian Modern Dining Room Tables

Materials

Oak

Solid oak dining table model 6288 by Børge Mogensen, Fredericia, Denmark 1960s

H 27.56 in W 38.19 in D 38.19 in

Teak Drop-Leaf Dining Table, Model 3601, by Arne Jacobsen for Fritz Hansen

By Fritz Hansen, Arne Jacobsen

Located in Dorchester, MA

Designed in 1952 by Arne Jacobsen for Fritz Hansen, this sleek Scandinavian modern dining table

Category

Vintage 1950s Danish Scandinavian Modern Drop-leaf and Pembroke Tables

Materials

Steel

Teak Drop-Leaf Dining Table, Model 3601, by Arne Jacobsen for Fritz Hansen

H 27.25 in W 27.5 in D 24.5 in

Dining Table Model PK54 Designed by Poul Kjaerholm, Denmark, 1963

By Poul Kjærholm

Located in Stockholm, SE

Dining table model PK54 designed by Poul Kjaerholm for E Kold Christensen, Denmark, 1963. Flint

Category

Mid-20th Century Danish Mid-Century Modern Tables

Materials

Marble, Steel

Dining Table Model PK54 Designed by Poul Kjaerholm, Denmark, 1963

H 25.6 in Dm 55.12 in

Robert Venturi for Knoll Postmodern Square Dining Table Model No. 65848, 1984

By Knoll, Robert Venturi

Located in Brooklyn, NY

Robert Venturi for Knoll Postmodern square dining table Model No. 65848, 1984. Cabriole legged

Category

Vintage 1980s American Post-Modern Dining Room Tables

Materials

Plywood

Robert Venturi for Knoll Postmodern Square Dining Table Model No. 65848, 1984

H 30 in W 48 in D 48 in

Dining Table Model 578 in Walnut by Florence Knoll

By Knoll, Florence Knoll, Nordiska Kompaniet

Located in Dronten, NL

Florence Knoll model 578 dining or conference table. The table features a boat shaped top in walnut

Category

Vintage 1950s American Mid-Century Modern Dining Room Tables

Materials

Steel

Dining Table Model 578 in Walnut by Florence Knoll

H 29.73 in W 78.75 in D 37.41 in

Vintage Large Ercol Refectory Dining Table Model 419, 1960s

By Ercol, Lucian Ercolani

Located in Ely, GB

A Beautiful and Iconic, 1960s Ercol Refectory Table - Model Number 419 The table is from the

Category

Vintage 1960s British Mid-Century Modern Dining Room Tables

Materials

Elm

Vintage Large Ercol Refectory Dining Table Model 419, 1960s

H 28.75 in W 60.24 in D 29.93 in

Franco Albini ash dining table Model TL2 Cavalletto, Poggi, (Very First Edition)

By Amando Poggi, Franco Albini

Located in Argelato, BO

Franco Albini ash dining table Model TL2 'Cavalletto' for Poggi, Italy (Very First Edition), Italy

Category

Vintage 1950s Italian Mid-Century Modern Desks and Writing Tables

Materials

Metal

Franco Albini ash dining table Model TL2 Cavalletto, Poggi, (Very First Edition)

H 27.56 in W 70.87 in D 27.56 in

Angelo Mangiarotti Large Italian Marble Dining Table Model Castore, 1975

By Angelo Mangiarotti

Located in Berlin, DE

Very rare model "Castore" dining table with glass top and a marble base designed by Angelo

Category

Late 20th Century Italian Mid-Century Modern Dining Room Tables

Materials

Marble

Angelo Mangiarotti Large Italian Marble Dining Table Model Castore, 1975

H 29.53 in Dm 51.19 in

Ico Parisi dining table model 754/2 Cassina Italy 1959

By Cassina, Ico Parisi

Located in Roosendaal, Noord Brabant

This is for a rare model 574/2 dining table designed by Ico Parisi and manufactured by Figli di

Category

Vintage 1950s Italian Mid-Century Modern Dining Room Tables

Materials

Velvet, Glass, Rosewood

Ico Parisi dining table model 754/2 Cassina Italy 1959

H 29.14 in W 82.68 in D 33.47 in

Rare Maestro dining table model by Gianfranco Frattini for Acerbis, 1980s

By Acerbis, Gianfranco Frattini

Located in Milano, IT

Rare Maestro dining table by Gianfranco Frattini for Acerbis, 1980s Rare Maestro model dining table

Category

Vintage 1980s Italian Modern Dining Room Tables

Materials

Wood

Rare Maestro dining table model by Gianfranco Frattini for Acerbis, 1980s

H 29.14 in W 51.19 in D 51.19 in

Vintage Danish Mid-Century Gunni Omann Teak Dining Table Model #55

By Gunni Omann

Located in Emeryville, CA

This vintage Danish mid-century teak dining table is an iconic design from the 60s. Model #55 was

Category

Mid-20th Century Danish Mid-Century Modern Dining Room Tables

Materials

Teak

Vintage Danish Mid-Century Gunni Omann Teak Dining Table Model #55

H 28 in W 47.5 in D 47.5 in

George Nakashima Extendable Walnut Dining Table Model 277 for Widdicomb, 1959

By George Nakashima, Widdicomb Furniture Co.

Located in Camden, ME

An extendable walnut dining table by George Nakashima for Widdicomb Furniture Company from 1959. A

Category

Vintage 1950s American Mid-Century Modern Dining Room Tables

Materials

Walnut

George Nakashima Extendable Walnut Dining Table Model 277 for Widdicomb, 1959

H 30.5 in Dm 48 in

Oval Oak Dining Table Model JH567 by Hans Wegner, 1960's

By Hans J. Wegner

Located in Uccle, BE

Hans J. Wegner oval table model JH567 for Johannes Andersen, extendable dining table solid oak

Category

Vintage 1960s Danish Scandinavian Modern Dining Room Tables

Materials

Oak

Oval Oak Dining Table Model JH567 by Hans Wegner, 1960's

H 28.35 in W 95.08 in D 51.19 in

1950's George Nelson X-Leg Extension Dining Table Model 5062

By Herman Miller, George Nelson

Located in Hanover, MA

Early George Nelson model 5062 X-Leg extension dining table for Herman Miller, 1952. Table has two

Category

Vintage 1950s American Mid-Century Modern Dining Room Tables

Materials

Iron

1950's George Nelson X-Leg Extension Dining Table Model 5062

H 29 in W 72 in D 36 in

Henning Kjærnulf Round Rosewood Dining Table Model 62 for Sorø Stolefabrik

By Henning Kjærnulf

Located in Denton, TX

Combination of solid and veneered rosewood round Danish Modern dining table with four leaves, one

Category

Mid-20th Century Danish Scandinavian Modern Dining Room Tables

Materials

Rosewood

Henning Kjærnulf Round Rosewood Dining Table Model 62 for Sorø Stolefabrik

H 29 in W 47.25 in D 47.25 in

Trestle Base Farm Dining Table Model 6010 Marked Stickley Fayetteville Syracuse

By L. & J.G. Stickley Inc.

Located in New York, NY

table is model 6010 from the Stickley catalogue, and was produced from 1928 - 1974, we date these

Category

Mid-20th Century American Arts and Crafts Dining Room Tables

Materials

Maple

Trestle Base Farm Dining Table Model 6010 Marked Stickley Fayetteville Syracuse

H 28.5 in W 30 in D 96 in

Tables Under $2,000

Antique and Vintage Tables

Get Updated with New Arrivals

Save "Dining Table Models", and we’ll notify you when there are new listings in this category.

Dining Table Models For Sale on 1stDibs

At 1stDibs, there are several options of dining table models available for sale. The range of distinct dining table models — often made from wood, metal and hardwood — can elevate any home. Find 422 antique and vintage dining table models at 1stDibs now, or shop our selection of 33 modern versions for a more contemporary example of this long-cherished furniture. Dining table models have long been popular, with older editions for sale from the 18th Century and newer versions made as recently as the 21st Century. There are many kinds of dining table models to choose from, but at 1stDibs, Mid-Century Modern, Scandinavian Modern and Modern dining table models are of considerable interest. Not every interior allows for large dining table models, so small dining table models measuring 13 inches across are available at 1stDibs. Dining table models have been a part of the life’s work for many furniture makers, but those produced by Hans J. Wegner, Niels Otto Møller and J.L. Møllers Møbelfabrik are consistently popular.

How Much are Dining Table Models?

The average selling price for at 1stDibs is $6,792, while they’re typically $531 on the low end and $65,000 highest priced.

Finding the Right Tables for You

The right vintage, new or antique tables can help make any space in your home stand out.

Over the years, the variety of tables available to us, as well as our specific needs for said tables, has broadened. Today, with all manner of these must-have furnishings differing in shape, material and style, any dining room table can shine just as brightly as the guests who gather around it.

Remember, when shopping for a dining table, it must fit your dining area, and you need to account for space around the table too — think outside the box, as an oval dining table may work for tighter spaces. Alternatively, if you’ve got the room, a Regency-style dining table can elevate any formal occasion at mealtime.

Innovative furniture makers and designers have also redefined what a table can be. Whether it’s an unconventional Ping-Pong table, a brass side table to display your treasured collectibles or a Louis Vuitton steamer trunk to add an air of nostalgia to your loft, your table can say a lot about you.

The visionary work of French designer Xavier Lavergne, for example, includes tables that draw on the forms of celestial bodies as often as they do aquatic creatures or fossils. Elsewhere, Italian architect Gae Aulenti, who looked to Roman architecture in crafting her stately Jumbo coffee table, created clever glass-topped mobile coffee tables that move on bicycle tires or sculpted wood wheels for Fontana Arte.

Coffee and cocktail tables can serve as a room’s centerpiece with attention-grabbing details and colors. Glass varieties will keep your hardwood flooring and dazzling area rugs on display, while a marble or stone coffee table in a modern interior can showcase your prized art books and decorative objects. A unique vintage desk or writing table can bring sophistication and even a bit of spice to your work life.

No matter your desired form or function, a quality table for your living space is a sound investment. On 1stDibs, browse a collection of vintage, new and antique bedside tables, mid-century end tables and more .

Questions About Dining Table Models

How high should a dining table be?
1 Answer
1stDibs ExpertFebruary 21, 2024
How high a dining table should be varies. If you already have your dining chairs, look for a table that is 10 to 12 inches taller than the seat height to provide ample legroom. The standard height for dining tables is around 30 inches. However, you can opt for taller pieces, such as 34- to 36-inch counter-height tables or 40- to 42-inch bar-height tables. Shop a large selection of dining tables on 1stDibs.
What is a dining table with leaf?
1 Answer
1stDibs ExpertOctober 5, 2021
A dining table with leaf is a dining table that has its middle part as solid and remains in place, but the two sides of the table drop down on a hinge, so they hang at the side. This is where the name 'drop leaf' comes from. Many homeowners have decided to go with leaf tables as they offer a lot of flexibility to their homes. On 1stDibs, you can find a variety of dining table options as well as a range of vintage and antique drop-leaf tables.
What is an MCM dining table?
1 Answer
1stDibs ExpertApril 5, 2022
An MCM dining table is a table that reflects the mid-century modern style. Typically these tables are functional and have clean minimalist lines. MCM furniture is made with a variety of materials and colors, but wood is the most common. Find a selection of mid-century modern tables and furniture on 1stDibs.
How thick should a dining table be?
1 Answer
1stDibs ExpertMarch 13, 2024
How thick a dining table should be varies. Many tables feature tops that are between 0.75 and 1 inch in thickness. However, some tables may have tops that are up to 2 inches thick. Typically, tables with thicker tops will have a more rustic appearance. Shop a large selection of dining tables on 1stDibs.
Is a dining table necessary?
1 Answer
1stDibs ExpertApril 22, 2024
No, a dining table isn't always necessary. People who eat only a few meals at home may not need a dining table, and some people prefer to eat at kitchen counters using counter-height stools. Or, they may choose to sit on the floor in front of a coffee table or to take their meals at a desk or on a TV tray or end table. On 1stDibs, shop a diverse assortment of dining tables.
How wide should a dining table be?
1 Answer
1stDibs ExpertMarch 25, 2024
How wide a dining table should be largely depends on its shape. Most rectangular and oval dining tables are 36 to 40 inches wide. Round table widths or diameters vary and will determine how many people can sit comfortably at one time. Generally, a round table 36 to 44 inches in width is ideal for up to four people, while ones that are 44 to 54 inches in diameter can accommodate four to six. Tables between 54 and 59 inches in width are suitable for six to eight people. On 1stDibs, shop a wide range of dining tables.
What is the height of a dining table?
1 Answer
1stDibs ExpertApril 12, 2024
The height of a dining table varies from piece to piece. However, standard dining tables are usually 28 to 30 inches tall. Counter-height tables are taller at 34 to 36 inches, and bar-height tables are the highest at 40 to 42 inches high. On 1stDibs, shop a wide range of dining tables from some of the world's top sellers.
What is the best dining table?
1 Answer
1stDibs ExpertOctober 12, 2021
Dining tables come in a huge variety of styles and are often chosen according to individual preference. The best dining tables are ones that are sturdy, well-made and able to withstand wear and tear. You should also consider your space limitations as well as budget. Find a versatile collection of antique and vintage dining tables on 1stDibs today.
What is the narrowest A dining table can be?
1 Answer
1stDibs ExpertOctober 12, 2021
The narrowest a dining table can be is 36 inches. This leaves 18 inches of space for each of the guests on the opposite side of the table, as well as room in the center for serving dishes or platters. Find a collection of antique and vintage dining tables on 1stDibs today.
What is a small dining table called?
1 Answer
1stDibs ExpertOctober 12, 2021
A small dining table is also called a dinette. A table and two to four seats are frequently included. Designed for small spaces, dinettes are most often used in kitchens and breakfast nooks. On 1stDibs, find a variety of vintage and antique dinettes.
Is mahogany good for a dining table?
1 Answer
1stDibs ExpertFebruary 13, 2023
Whether mahogany is good for a dining table is largely a matter of personal preference. Some people may prefer the hardwood for their dining room furniture owing to its natural beauty, durability and stain-resistant qualities. Mahogany also features a striking natural grain that renders it ideal for use in that part of your home, specifically as dinner guests will be able to experience it! Shop a range of mahogany dining tables on 1stDibs.
What is a drop leaf dining table?
1 Answer
1stDibs ExpertSeptember 28, 2021
A drop-leaf table is a type of table that has a fixed portion in the center and foldable portions on either side joined by hinges. These foldable portions can be dropped and closed to save space when the table is not in use. On 1stDibs, find a variety of antique and vintage drop leaf dining tables.
How do I protect my maple dining table?
1 Answer
1stDibs ExpertApril 5, 2022
To protect your maple dining table, use placemats or a tablecloth to reduce the risk of scratches. Always place a trivet underneath hot serveware to avoid scorching the finish. Set glasses on coasters to keep rings off the wood. Shop a selection of vintage and antique dining tables on 1stDibs.
What are large dining tables called?
1 Answer
1stDibs ExpertMarch 22, 2022
Large dining tables are usually called banquet tables due to their ability to seat a crowd. Normally, banquet tables measure over 10 feet in length. Some standard dining tables convert to banquet tables with removable leaves. On 1stDibs, shop a variety of antique and vintage dining tables.
What is the most durable material for a dining table?
1 Answer
1stDibs ExpertFebruary 13, 2023
There isn’t a single most durable material for a dining table. Solid hardwood and stainless steel can hold up to wear and tear, but the quality of the craftsmanship also impacts durability. Find a variety of dining tables on 1stDibs.
What type of dining table is the most durable?
1 Answer
1stDibs ExpertMarch 31, 2023
There is no single most durable type of dining table. Materials like solid hardwood, stone and marble can make for long-lasting tables, but other factors like how you care for the piece and how well it's made also help determine durability. On 1stDibs, shop a variety of dining tables from some of the world's top sellers.
Is onyx good for a dining table?
1 Answer
1stDibs ExpertFebruary 7, 2024
Yes, onyx can be a good material for a dining table. The mineral is strong, but it is relatively lightweight, making tables easy to move throughout a room as needed. Many people find the color and luster of onyx tabletops to be visually appealing. Since the material can become scratched or damaged by heat, it is important to take steps to protect an onyx dining table by using felt-backed trivets or heat-resistant fabric mats beneath hot dishes. On 1stDibs, explore a collection of onyx dining tables.
Do chairs have to match the dining table?
1 Answer
1stDibs ExpertSeptember 25, 2019
Dining room chairs and dining tables do not necessarily have to match.
Should a buffet be longer than a dining table?
1 Answer
1stDibs ExpertApril 5, 2024
No, a buffet usually shouldn't be longer than a dining table. Most experts recommend that you choose a buffet that is the same length or slightly shorter than your dining table. Keeping the two pieces in proportion with each other creates balance within a space.

Find vintage and antique dining tables on 1stDibs.
How tall is the typical dining table?
1 Answer
1stDibs ExpertSeptember 25, 2019
Dining room tables are typically 30 inches high.

The Ultimate Guide to Types of Tables for the Home

Whether you’re just moving in or ready to give your home a makeover, our guide will give you pointers on tables that are fitting for every room, nook and hallway.

Riotous Shapes and Colors Have Made Uchronia’s Designs the Toast of Paris

Julien Sebban’s energetic design collective is radically reshaping the look of 21st-century European furniture and interiors.

Is Lionel Jadot the Willy Wonka of Upcycled Belgian Design?

From his massive collaborative workshop in a former paper factory, the designer concocts funky furniture from disused materials, as well as luxe hotel interiors like the new Mix Brussels.