Italian Design Club

Set of four “Sapporo” dining chairs, designed by Mario Marenco and produced by the Italian manufacturer Mobilgirgi in the 1970s. They feature a walnut briar structure and a brown lea...

Model B3 “Wassily” armchair, designed by Marcel Breuer in 1925 and produced in Italy in 1973. It features a chrome-plated steel structure and seat and back in black leather. Good v...

Hovercraft is a two-seater sofa with a wooden frame and internal padding made of polyurethane foam. The down cushions are reinforced with polyurethane foam, and the upholstery is ful...

Set of twelve “Monk” dining chairs designed by Afra and Tobia Scarpa for Molteni in 1973. Made of English red and black leather and walnut. Fully restored in Italy. Interesting is t...

Set of three model B3 “Wassily” armchairs, designed by Marcel Breuer in 1925 and produced in Italy in 1973. It features a chrome-plated steel structure and seat and back in black le...

Set of eight “Monk” dining chairs designed by Afra and Tobia Scarpa for Molteni in 1973. Made of black and brick leather and walnut. Fully restored in Italy. Interesting is ...

Set of ten Model 121 dining chairs, designed by Afra and Tobia Scarpa and produced by the Italian manufacturer Cassina in 1967. They feature black leather upholstery and a walnut structure. Fully restored in Italy. Afra and Tobia Scarpa designed the 121 chair in 1965. A sketch from 1943 made by Carlo Scarpa (Tobia’s father) inspired its shape. Two thin plywood “petals” compose the seat and the backrest. They are available with leather upholstery or aniline-dyed. The back has cut in the lower part, required due to a reinforcement that reacts to torsion stress, which is strongest at this point. Furthermore, the basis is a solid wood double trestle. Eight screws link...

Set of six “Monk” dining chairs designed by Afra and Tobia Scarpa for Molteni in 1973. Made of black leather and black lacquered beech wood. Fully restored in Italy. Interesting is ...

Set of eight “Monk” dining chairs designed by Afra and Tobia Scarpa for Molteni in 1973. Made of English red and black leather and walnut. Fully restored in Italy. Interesting is th...

Set of ten “Monk” dining chairs designed by Afra and Tobia Scarpa for Molteni in 1973. Made of black canvas and walnut. They present a white sewing on the front of the seat and the u...

Set of six “Monk” dining chairs designed by Afra and Tobia Scarpa for Molteni in 1973. Made of black canvas and walnut. They present a white sewing on the front of the seat and the u...

Cornaro two-seater sofa, designed by Carlo Scarpa and manufactured by Studio Simon in 1974. Made of Iroko wood, foam, and azure chenille velvet. Excellent vintage condition. Born in Venice on June 2nd, 1906, Carlo Scarpa began working very early. Only a year after he had first qualified as an architect in 1926, he began working for the Murano glassmakers Cappellin & Co. in a consultative capacity; from 1927, he began to experiment with the Murano glass, and this research not only gave him excellent results here but would also inform his progress for many years to come. Between 1935 and 1937, as he entered his thirties, Carlo Scarpa accepted his first important commission, the renovation of Venice’s Cà Foscari. He adapted the spaces of this stately University building which stands on the banks of the Grand Canal, creating rooms for the Dean’s offices and a new hall for academic ceremonies; Mario Sironi and Mario De Luigi were charged with doing the restoration work on the frescos. After 1945, Carlo Scarpa was constantly busy with new commissions, including various furnishings and designs for the renovation of Venice’s Hotel Bauer and designing a tall building in Padua and a residential area in Feltre, all worth mentioning. One of his key works, despite its relatively modest diminished proportions, was the first of many works which were to follow in the nineteen fifties: the [bookshop known as the] Padiglione del Libro, which stands in Venice’s Giardini di Castello and shows clearly Scarpa’s passion for the works of Frank Lloyd Wright. In the years which were to follow, after he had met the American architect, Scarpa repeated similar experiments on other occasions, as can be seen, in particular, in the sketches he drew up in 1953 for villa Zoppas in Conegliano, which show some of his most promising work. However, this work unfortunately never came to fruition. Carlo Scarpa later created three museum layouts to prove pivotal in how twentieth-century museums were set up from then on. Between 1955 and 1957, he completed extension work on Treviso’s Gipsoteca Canoviana [the museum that houses Canova’s sculptures] in Possagno, taking a similar experimental approach to the one he used for the Venezuelan Pavilion at [Venice’s] Giardini di Castello which he was building at the same time (1954-56). In Possagno Carlo Scarpa was to create one of his most incredible ever works, which inevitably bears comparison with two other museum layouts that he was working on over the same period, those of the Galleria Nazionale di Sicilia, housed in the Palazzo Abatellis in Palermo (1953-55) and at the Castelvecchio in Verona (1957- 1974), all of which were highly acclaimed, adding to his growing fame. Two other buildings, which are beautifully arranged in spatial terms, can be added to this long list of key works that were started and, in some cases, even completed during the nineteen fifties. After winning the Olivetti Award for architecture in 1956, Scarpa began work in Venice’s Piazza San Marco on an area destined to house products made by the Industrial manufacturers Ivrea. Over the same period (1959-1963), he also worked on renovating and restoring the gardens and ground floor of the Fondazione Querini Stampalia in Venice, which many consider one of his greatest works. While he worked on-site at the Fondazione Querini Stampalia, Carlo Scarpa also began building a villa in Udine for the Veritti family. To shed some light on how much his work evolved over the years, it may be useful to compare this work with that of his very last building, villa Ottolenghi Bardolino, which was near completion at the time of his sudden death in 1978. Upon completion of villa Veritti over the next ten years, without ever letting up on his work on renovation and layouts, Scarpa accepted some highly challenging commissions which were to make the most of his formal skills, working on the Carlo Felice Theatre in Genoa as well as another theatre in Vicenza. Towards the end of this decade, in 1969, Rina Brion commissioned Carlo Scarpa to build the Brion Mausoleum in San Vito d’Altivole (Treviso), a piece he continued to work on right up until the moment of his death. Nevertheless, even though he was totally absorbed by work on this mausoleum, plenty of other episodes can offer some insight into the final years of his career. As work on the San Vito d’Altivole Mausoleum began to lessen in 1973, Carlo Scarpa started building the new headquarters for the Banca Popolare di Verona. He drew up plans that were surprisingly different from the work he carried out simultaneously on the villa Ottolenghi. However, the plans Carlo Scarpa drew up, at different times, for a monument in Brescia’s Piazza della Loggia commemorating victims of the terrorist attack on May 28th, 1974, make a sharp contrast to the work he carried out in Verona, almost as if there is a certain hesitation after so many mannered excesses. The same Pietas that informs his designs for the Piazza Della Loggia can also be seen in the presence of the water that flows through the Brion Mausoleum, almost as if to give a concrete manifestation of pity in this twentieth-century work of art. Carlo Scarpa has put together a highly sophisticated collection of structures occupying the mausoleum’s L-shaped space stretching across both sides of the old San Vito d’Altivole cemetery. A myriad of different forms and an equally large number of different pieces, all of which are separate and yet inextricably linked to form a chain that seems to offer no promise of continuity, arising out of these are those whose only justification for being there is to bear the warning “si vis vitam, para mortem,” [if you wish to experience life prepare for death] as if to tell a tale that suggests the circle of time, joining together the commemoration of the dead with a celebration of life. At the entrance of the Brion Mausoleum stand the “propylaea,” followed by a cloister that ends by a small chapel, with an arcosolium bearing the family sarcophagi, the central pavilion, held in place on broken cast iron supports, stands over a mirror-shaped stretch of water and occupies one end of the family’s burial space. The musical sound of the walkways, teamed with the luminosity of these harmoniously blended spaces, shows how, in keeping with his strong sense of vision, Carlo Scarpa could make the most of all his many skills to come up with this truly magnificent space. As well as an outstanding commitment to architectural work, with the many projects we have already seen punctuating his career, Carlo Scarpa also made many equally important forays into the world of applied arts. Between 1926 and 1931, he worked for the Murano glassmakers Cappellin, later taking what he had learned with him when he went to work for the glassmakers Venini from 1933 until the 1950s. The story of how he came to work on furniture design is different, however, and began with the furniture he designed to replace lost furnishings during his renovation of Cà Foscari. The later mass-produced furniture started differently, given that many pieces were originally one-off designs “made to measure.” Industrial manufacturing using these designs as prototypes came into being thanks to the continuity afforded him by Dino Gavina, who, as well as this, also invited Carlo Scarpa to become president of the company Gavina SpA, later to become SIMON, a company Gavina founded eight years on, in partnership with Maria Simoncini (whose own name accounts for the choice of company name). Carlo Scarpa and Gavina forged a strong bond in 1968 as they began to put various models of his into production for Simon, such as the “Doge” table, which also formed the basis for the “Sarpi” and “Florian” tables. In the early seventies, other tables that followed included “Valmarana,” “Quatour,” and “Orseolo.” While in 1974, they added a couch and armchair, “Cornaro,” to the collection and the “Toledo” bed...

Set of four “Monk” dining chairs designed by Afra and Tobia Scarpa for Molteni in 1973. Made of English red and black leather and walnut. Fully restored in Italy. Interesting is the...

Set of ten Africa dining chairs, designed by Afra and Tobia Scarpa and produced by the Italian manufacturer Maxalto in 1976. They feature a clear walnut briar structure and a black and cognac leather seat. Fully restored in Italy. The main protagonist of the Africa Maxalto...

Sesann armchair, designed by Gianfranco Frattini in 1970 and produced by the Italian manufacturer Cassina. It features black leather upholstery and a chrome tubular cage as structur...

Camaleonda sofa, designed by Mario Bellini and manufactured by B&B Italia in 1972. The set features three modules with big backrest, and two modules with small backrest. Alpaca...

Camaleonda sofa, designed by Mario Bellini and manufactured by B&B Italia in 1972. The set features seven modules with backrest (four big modules and three small ones) and one armre...

Set of six “Monk” dining chairs designed by Afra and Tobia Scarpa for Molteni in 1973. Made of English red leather and walnut. Fully restored in Italy. Interesting is the ‘flat’ sha...

Soriana lounge chair, designed by Afra and Tobia Scarpa, and produced by the Italian manufacturer Cassina in 1969. Re-upholstered with brown velvet. Winner of the “Compasso d’Oro” pr...

Medea dining circular table, designed by Vittorio Nobili for Fratelli Tagliabue in 1954. Made of teak iron and brass, excellent vintage condition. Reported at “Compasso d’Oro Prize...

Barcelona lounge chair, designed by Ludwig Mies Van der Rohe in 1929 and manufactured by Knoll International in 1972. Made of chromed steel and leather. Excellent vintage condition. ...

Anfibio sofa-bed by Alessandro Becchi for Giovannetti, 1972. Fully restored and upholstered with high-quality grey Italian natural leather. Mattress upholstered with soft sheepskin wool. The Anfibio sofa ranks among the most outstanding cult products of Italian design. It is innovative, original, and highly functional; it is a revolutionary sofa-bed, a symbol of high quality and sapient artisanry. It is possible to find it in the permanent collection of 13 museums worldwide, among which the MoMa in New York, since 1972. Alessandro Becchi designed the “Anfibio” sofa for the Italian manufacturer Giovannetti in 1970. It is characterized by generous dimensions and soft, embracing shapes that invite relaxation and comfort. It reminds a floating dinghy thanks to its lack of rigid mechanism. This feature inspired its name, which means amphibious. Furthermore, the sofa presents a rectangular steel structure and padding in non-deformable high-density polyurethane, covered with acrylic thermo-welded fibers and protective fabric. The Anfibio sofa by Giovannetti is available covered in leather or fabric and several colors. This artwork is the ideal convertible solution, the perfect combination of aesthetic research and innovative household living. Alessandro Becchi was born in Florence in 1946. He studied at ISIA in his hometown, and in the late 60s, he began his career as a designer. In 1970 he designed the revolutionary Anfibio sofa for Giovannetti. In 1972, thanks to the success of Anfibio, he was invited to the exhibition “Italy: the New Domestic Landscape” at the Museum of Modern Arts in New York. This date opens in close collaboration with Giovannetti. He designed a series of sofa-beds, such as Only You, Brando, Diletto, and the famous armchairs Le Bugie...

Soriana three seater sofa, designed by Afra and Tobia Scarpa, and produced by the Italian manufacturer Cassina in 1969. Re-upholstered with brown ve...

Set of eight “Monk” dining chairs designed by Afra and Tobia Scarpa for Molteni in 1973. Made of black leather and ash wood. Fully restored in Italy. Interesting is the ‘flat’ s...

Dining table mod. ‘Samo’ by Studio Simon. Series ‘Ultrarazionale’. Italy, 1970. Made of granite. Literature: Giuliana Gramigna, Repertorio 1950-2000, Allemandi, Torino, 2003, p.180. Excellent vintage condition. The Samo table was designed in 1970 by the project office of Studio Simon. Carlo Scarpa was the brand's artistic director, and the Venetian architect's style inspired the shapes of this table. Born in Venice on June 2nd, 1906, Carlo Scarpa began working at a very early age. Only a year after he had first qualified as an architect in 1926, he began working for the Murano glassmakers Cappellin & Co. in a consultative capacity; from 1927, he began to experiment with the Murano glass, and this research not only gave him excellent results here but would also inform his progress for many years to come. Between 1935 and 1937, as he entered his thirties, Carlo Scarpa accepted his first important commission, the renovation of Venice’s Cà Foscari. He adapted the spaces of this stately University building which stands on the banks of the Grand Canal, creating rooms for the Dean’s offices and a new hall for academic ceremonies; Mario Sironi and Mario De Luigi were charged with doing the restoration work on the frescos. After 1945, Carlo Scarpa found himself constantly busy with new commissions, including various furnishings and designs for the renovation of Venice’s Hotel Bauer and designing a tall building in Padua and a residential area in Feltre, which are all worth mention. One of his key works, despite its relatively modest diminished proportions, was the first of many works which were to follow in the nineteen fifties: the [bookshop known as the] Padiglione del Libro, which stands in Venice’s Giardini di Castello and shows clearly Scarpa’s passion for the works of Frank Lloyd Wright. In the years which were to follow, after he had met the American architect, Scarpa repeated similar experiments on other occasions, as can be seen, in particular, in the sketches he drew up in 1953 for villa Zoppas in Conegliano, which show some of his most promising work. However, this work unfortunately never came to fruition. Carlo Scarpa later created three museum layouts to prove pivotal in terms of how 20th century museums were to be set up from then on. Between 1955 and 1957, he completed extension work on Treviso’s Gipsoteca Canoviana [the museum that houses Canova’s sculptures] in Possagno, taking a similar experimental approach to the one he used for the Venezuelan Pavilion at [Venice’s] Giardini di Castello which he was building at the same time (1954-56). In Possagno Carlo Scarpa was to create one of his greatest ever works, which inevitably bears comparison with two other museum layouts that he was working on over the same period, those of the Galleria Nazionale di Sicilia, housed in the Palazzo Abatellis in Palermo (1953-55) and at the Castelvecchio in Verona (1957- 1974), all of which were highly acclaimed, adding to his growing fame. Two other buildings, which are beautifully arranged in spatial terms, can be added to this long list of key works that were started and, in some cases, even completed during the nineteen fifties. After winning the Olivetti award for architecture in 1956, Scarpa began work in Venice’s Piazza San Marco on an area destined to house products made by the Industrial manufacturers Ivrea. Over the same period (1959-1963), he also worked on renovation and restoration of the gardens and ground floor of the Fondazione Querini Stampalia in Venice, which many consider being one of his greatest works. While he busied himself working on-site at the Fondazione Querini Stampalia, Carlo Scarpa also began work building a villa in Udine for the Veritti family. To shed some light on the extent to which his work evolved over the years, it may perhaps be useful to compare this work with that of his very last building, villa Ottolenghi Bardolino, which was near to completion at the time of his sudden death in 1978. Upon completion of villa Veritti over the next ten years, without ever letting up on his work on renovation and layouts, Scarpa accepted some highly challenging commissions which were to make the most of his formal skills, working on the Carlo Felice Theatre in Genoa as well as another theatre in Vicenza. Towards the end of this decade, in 1969, Rina Brion commissioned Carlo Scarpa to build the Brion Mausoleum in San Vito d’Altivole (Treviso), a piece he continued to work on right up until the moment of his death. Nevertheless, even though he was totally absorbed by work on this mausoleum, there are plenty of other episodes which can offer some insight into the final years of his career. As work on the San Vito d’Altivole Mausoleum began to lessen from 1973, Carlo Scarpa began work building the new headquarters for the Banca Popolare di Verona. He drew up plans that were surprisingly different from the work he was carrying out at the same time on the villa Ottolenghi. However, the plans Carlo Scarpa drew up, at different times, for a monument in Brescia’s Piazza della Loggia commemorating victims of the terrorist attack on May 28th, 1974, make a sharp contrast to the work he carried out in Verona, almost as if there is a certain hesitation after so many mannered excesses. The same Pietas that informs his designs for the Piazza Della Loggia can also be seen in the presence of the water that flows through the Brion Mausoleum, almost as if to give a concrete manifestation of pity in this 20th century work of art. Carlo Scarpa has put together a highly sophisticated collection of structures, occupying the mausoleum’s L-shaped space stretching across both sides of the old San Vito d’Altivole cemetery. A myriad of different forms and an equally large number of different pieces, all of which are separate and yet inextricably linked to form a chain that seems to offer no promise of continuity, rising up out of these are those whose only justification for being there is to bear the warning “si vis vitam, para mortem”, [if you wish to experience life prepare for death] as if to tell a tale that suggests the circle of time, joining together the commemoration of the dead with a celebration of life. At the entrance of the Brion Mausoleum stand the “propylaea” followed by a cloister which ends by a small chapel, with an arcosolium bearing the family sarcophagi, the main pavilion, held in place on broken cast iron supports, stands over a mirror-shaped stretch of water and occupies one end of the family’s burial space. The musical sound of the walkways teamed with the luminosity of these harmoniously blended spaces shows how, in keeping with his strong sense of vision, Carlo Scarpa could make the most of all of his many skills to come up with this truly magnificent space. As well as a great commitment to architectural work, with the many projects which we have already seen punctuating his career, Carlo Scarpa also made many equally important forays into the world of applied arts. Between 1926 and 1931, he worked for the Murano glassmakers Cappellin, later taking what he had learned with him when he went to work for the glassmakers Venini from 1933 until the 1950s. The story of how he came to work on furniture design is different, however, and began with the furniture he designed to replace lost furnishings during his renovation of Cà Foscari. The later mass-produced furniture started differently, given that many pieces were originally one-off designs “made to measure”. Industrial manufacturing using these designs as prototypes came into being thanks to the continuity afforded him by Dino Gavina, who, as well as this, also invited Carlo Scarpa to become president of the company Gavina SpA, later to become SIMON, a company Gavina founded 8 years on, in partnership with Maria Simoncini (whose own name accounts for the choice of company name). Carlo Scarpa and Gavina forged a strong bond in 1968 as they began to put various models of his into production for Simon, such as the “Doge” table, which also formed the basis for the “Sarpi” and “Florian” tables. In the early seventies, other tables that followed included “Valmarana”, “Quatour” and “Orseolo”. While in 1974, they added couch and armchair “Cornaro” to the collection and the “Toledo” bed...

Set of six model B3 “Wassily” armchairs, designed by Marcel Breuer in 1925 and produced by the Italian manufacturer Gavina in 1969. It features a chrome-plated steel structure and...

Camaleonda sofa, designed by Mario Bellini and manufactured by B&B Italia in 1972. The set features two modules with backrest and two armrests. Green linen velvet upholstery. Fu...

Scuderia dining room set, designed by Carlo Scarpa for the Italian manufacturer Bernini in 1977. Composed of 5 mod. 783 “Kentucky” dining chairs...

Coffee table in the style of Alanda by Paolo Piva for B&B Italia. Step into the world of timeless elegance with the Alanda Coffee Table, a celebrated artifact that heralded the 80s ...

Set of ten Model 121 dining chairs, designed by Afra and Tobia Scarpa and produced by the Italian manufacturer Cassina in 1967. They feature English red leather upholstery and a wal...

Sesann two-seater sofa, designed by Gianfranco Frattini in 1970 and produced by the Italian manufacturer Cassina. It features wool bouclé upholstery and a chrome tubular cage as s...

LB7 bookcase, designed by Franco Albini and manufactured by Poggi in 1957. Modular bookstore composed by upholds, containers with flying and doors, shelve. The industrial standard for every product component allows permanent and different solutions, from the bearing structures to the elements. The structure does not need anchorages to the wall and can be placed in the middle of the space. This set is composed of 3 modules, ten shelves, and three containers. It is made of Rosewood, iron, and brass. Excellent vintage condition. Franco Albini was born in Robbiate in 1905, and after his childhood and part of his youth, he moved to Milan. He graduated at Politecnico of Milan, Faculty of Architecture, in 1929, and He collaborated for three years in Giò Ponti and Emilio Lancia’s office. He probably had his international contacts here, at The International Exposition of 1929 in Barcelona and Paris, where he visited le Corbusier’s office, as Franca Helg used to tell. Throughout these first three years, his works were undoubtedly related to XIXth Century. His meeting with Edoardo Persico marks an evident turnover towards rationalism and writers for “Casabella” magazine. Persico’s thoughtful and ironical comments on some of Albini’s drawings for office furniture caused him deep upsetting. “I spent days of real anxiety – tells Albini – I had to answer all questions. I had a long fever”. The new phase that the meeting provoked begins with opening his own first office at Via Panizza with Renato Camus and Giancarlo Palanti. The group of Architects starts taking care of social housing, participating in the competition for the Baracca neighborhood in 1932, and then realizing the Ifacp neighborhood: Fabio Filzi (1936/38), Gabriele D’Annunzio, and Ettore Ponti (1939). During those years, He also worked for his first private villa (Pestarini). It is mainly in the context of exhibitions that the Italian architect experiments the compromise between rigor and poetic fantasy that Pagano was talking about; He conceived all the elements that would become recurrent in all types of his work – Architecture, Interiors, Design. The 1933 opening of the new Triennale of Milano, in Palazzo dell’Arte, becomes an occasion to express the highly innovative character of rationalist thinking. In this place, to experiment with new materials and solutions, but most of all a “method”. Young rationalist architects cultivated the art of exhibiting as a communication lab, an open field to space solutions. Albini, with Giancarlo Palanti, sets the steel structure house (with R. Camus, G. Mazzoleni, G. Minoletti and coordination by G. Pagano) designing also its furniture. For the next Triennale in 1936, marked by Persico’s early death, Franco Albini, together with a group of young architects around Pagano, takes care of the exhibition of Dwelling, where he presented 3 types of lodgings. In the same year, Albini and Romano design the exhibition for Ancient Italian jewelry: vertical uprights, simple linear poles design space. This element is recurring in other works, like the Scipione exhibition (1941), Vanzetti stand (1942), and Olivetti shop in Paris (1956). The architectural space is readable through a grid, introducing a third dimension, the vertical one, with a sense of lightness and transparency. Upright is also used in design objects, such as the Veliero bookcase...

Set of ten Model 121 dining chairs, designed by Afra and Tobia Scarpa and produced by the Italian manufacturer Cassina in 1967. They feature black and English red leather upholstery...

Beautiful set of four B64 “Cesca” dining chairs made in Italy in the 1970s. Cesca chairs were initially designed in 1928 by French Hungarian architect Marcel Breuer and named after h...

The Sesann lounge chair was designed by Gianfranco Frattini in 1970 and produced by the Italian manufacturer Cassina. This lounge chair features a chocolate brown alpaca velvet upho...

The Sesann lounge chair was designed by Gianfranco Frattini in 1970 and produced by the Italian manufacturer Cassina. This lounge chair features a chocolate brown alpaca velvet upho...

This armchair is a stunning replica of the famous "Poltrona Frau" design, reflecting the finest traditions of European furniture craftsmanship. It features its original brick leather...

Set of eight “Monk” dining chairs designed by Afra and Tobia Scarpa for Molteni in 1973. Made of black leather and black lacquered beech wood. Fully restored in Italy. Interesting i...

“Camaleonda” sofa, in white velvet upholstery, designed by Mario Bellini and manufactured by B&B Italia in 1972. Fully restored and reupholstered in Italy. The sofa is very comfort...

Set of 5 mod. 783 “Kentucky” dining chairs, designed by Carlo Scarpa for the Italian manufacturer Bernini in 1977. Structure made from oak and walnut timber. Seats and backrest made from cognac leather. Excellent vintage condition. Carlo Scarpa designed this chair for the “Scuderia” series., the last project he made for Bernini. The architect took inspiration from the “shaker” movement. He designed the chair slightly inclined at the front. This feature allows you to swing backward (until you lean on a wall) and remain in balance. Born in Venice on June 2nd, 1906, Carlo Scarpa began working at a very early age. A year after he had first qualified as an architect in 1926, he began working for the Murano glassmakers Cappellin & Co. in a consultative capacity. From 1927, Carlo Scarpa began to experiment with the Murano glass, and this research not only gave him excellent results here but would also inform his progress for many years to come. Between 1935 and 1937, as he entered his thirties, Carlo Scarpa accepted his first important commission, the renovation of Venice’s Cà Foscari. He adapted the spaces of this stately University building that stands on the Grand Canal banks, creating rooms for the Dean’s offices and a new hall for academic ceremonies; Mario Sironi and Mario De Luigi were charged with doing the restoration work on the frescos. After 1945, Carlo Scarpa found himself constantly busy with new commissions, including various furnishings and designs for the renovation of Venice’s Hotel Bauer and designing a tall building in Padua and a residential area in Feltre, all worth mentioning. One of his key works, despite its relatively modest diminished proportions, was the [bookshop known as the] Padiglione del Libro, which stands in Venice’s Giardini di Castello and clearly shows Scarpa’s passion for the works of Frank Lloyd Wright. In the years which were to follow, after he had met the American architect, Scarpa repeated similar experiments on other occasions, as can be seen, in particular, in the sketches he drew up in 1953 for villa Zoppas in Conegliano, which show some of his most promising work. However, this work unfortunately never came to fruition. Carlo Scarpa later created three museum layouts to prove pivotal in terms of how twentieth-century museums were set up from then on. Between 1955 and 1957, he completed extension work on Treviso’s Gipsoteca Canoviana [the museum that houses Canova’s sculptures] in Possagno, taking a similar experimental approach to the one he used for the Venezuelan Pavilion at [Venice’s] Giardini di Castello which he was building at the same time (1954-56). In Possagno Carlo Scarpa was to create one of his most significant ever works, which inevitably bears comparison with two other museum layouts that he was working on over the same period, those of: – Galleria Nazionale di Sicilia, housed in the Palazzo Abatellis in Palermo (1953-55) – Castelvecchio in Verona (1957- 1974), all of which were highly acclaimed, adding to his growing fame. Two other buildings, which are beautifully arranged in spatial terms, can be added to this long list of key works that were started and, in some cases, even completed during the nineteen fifties. After winning the Olivetti award for architecture in 1956, Scarpa began work in Venice’s Piazza San Marco on an area destined to house products made by the Industrial manufacturers Ivrea. Over the same period (1959-1963), he also worked on the renovation and restoration of the gardens and ground floor of the Fondazione Querini Stampalia in Venice, which many consider one of his greatest works. While he busied himself working on-site at the Fondazione Querini Stampalia, Carlo Scarpa also began work building a villa in Udine for the Veritti family. To shed some light on the extent to which his work evolved over the years, it may perhaps be useful to compare this work with that of his very last building, villa Ottolenghi Bardolino, which was near to completion at the time of his sudden death in 1978. Upon completion of villa Veritti over the next ten years, without ever letting up on his work on renovation and layouts, Scarpa accepted some highly challenging commissions, working on the Carlo Felice Theatre in Genoa and another theatre in Vicenza. Towards the end of this decade, in 1969, Rina Brion commissioned Carlo Scarpa to build the Brion Mausoleum in San Vito d’Altivole (Treviso), a piece he continued to work on right up until the moment of his death. Nevertheless, even though he was totally absorbed by work on this mausoleum, there are plenty of other episodes which can offer some insight into the final years of his career. As work on the San Vito d’Altivole Mausoleum began to lessen from 1973, Carlo Scarpa started building the new headquarters for the Banca Popolare di Verona. He drew up plans that were surprisingly different from the work he was carrying out at the same time on the villa Ottolenghi. However, the plans Carlo Scarpa drew up, at different times, for a monument in Brescia’s Piazza della Loggia commemorating victims of the terrorist attack on May 28th, 1974, make a sharp contrast to the work he carried out in Verona, almost as if there is a certain hesitation after so many mannered excesses. The same Pietas that informs his designs for the Piazza Della Loggia can also be seen in the presence of the water that flows through the Brion Mausoleum, almost as if to give a concrete manifestation of pity in this twentieth-century work of art. Carlo Scarpa has put together a highly sophisticated collection of structures, occupying the mausoleum’s L-shaped space stretching across both sides of the old San Vito d’Altivole cemetery. A myriad of different forms and an equally large number of different pieces, all of which are separate and yet inextricably linked to form a chain that seems to offer no promise of continuity, rising up out of these are those whose only justification for being there is to bear the warning “si vis vitam, para mortem,” [if you wish to experience life prepare for death] as if to tell a tale that suggests the circle of time, joining together the commemoration of the dead with a celebration of life. At the entrance of the Brion Mausoleum stand the “propylaea” followed by a cloister which ends by a small chapel, with an arcosolium bearing the family sarcophagi, the main pavilion, held in place on broken cast iron supports, stands over a mirror-shaped stretch of water and occupies one end of the family’s burial space. The musical sound of the walkways teamed with the luminosity of these harmoniously blended spaces shows how, in keeping with his strong sense of vision, Carlo Scarpa could make the most of all of his many skills to come up with this truly magnificent space. As well as a great commitment to architectural work, with the many projects which we have already seen punctuating his career, Carlo Scarpa also made many equally important forays into the world of applied arts. Between 1926 and 1931, he worked for the Murano glassmakers Cappellin, later taking what he had learned with him when he went to work for the glassmakers Venini from 1933 until the 1950s. The story of how he came to work on furniture design is different, however, and began with the furniture he designed to replace lost furnishings during his renovation of Cà Foscari. The later mass-produced furniture started differently, given that many pieces were originally one-off designs “made to measure.” Industrial manufacturing using these designs as prototypes came into being thanks to the continuity afforded him by Dino Gavina, who, as well as this, also invited Carlo Scarpa to become president of the company Gavina SpA, later to become SIMON, a company Gavina founded eight years on, in partnership with Maria Simoncini (whose own name accounts for the choice of company name). Carlo Scarpa and Gavina forged a strong bond in 1968 as they began to put various models of his into production for Simon, such as the “Doge” table, which also formed the basis for the “Sarpi” and “Florian” tables. In the early seventies, other tables that followed included “Valmarana,” “Quatour,” and “Orseolo.” While in 1974, they added couch and armchair “Cornaro” to the collection and the “Toledo” bed...

“Camaleonda” sofa, in red cotton upholstery, designed by Mario Bellini and manufactured by B&B Italia in 1972. Fully restored and reupholstered in Italy. The sofa is very comfo...

The Sesann lounge chair was designed by Gianfranco Frattini in 1970 and produced by the Italian manufacturer Cassina. This set is composed of two lounge chairs upholstered in tobacco and chocolate brown alpaca velvet. Sesann is characterized by an organic and informal shape and is defined by the tubular metal detail that wraps around the soft, upholstered seat. In the 1970s, the Cassina catalogue...

Togo modular sofa, designed by Michel Ducaroy and manufactured by Ligne Roset in 1974. The set is composed of 2 modules. Purple cotton upholstery. Ex...

Set of 4 Dialogo chairs designed by Afra and Tobia Scarpa for B&B Italia in 1973. The chairs are composed of a natural ash structure and a fib...

Set of six Africa dining chairs, designed by Afra and Tobia Scarpa and produced by the Italian manufacturer Maxalto in 1976. They feature a clear walnut briar structure and a black leather seat. Fully restored in Italy. The main protagonist of the Africa Maxalto...

Set of four Africa dining chairs, designed by Afra and Tobia Scarpa and produced by the Italian manufacturer Maxalto in 1976. They feature a clear walnut briar structure and a cognac leather seat. Fully restored in Italy. The main protagonist of the Africa Maxalto...

Soriana lounge chair and ottoman, designed by Afra and Tobia Scarpa, and produced by the Italian manufacturer Cassina in 1969. Re-upholstered with brown velvet. Winner of the “Compas...

Massimo Morozzi for Cassina, “Tangram” modular table, painted beech, Italy, 1983. The “Tangram” table awakes more than just one association. The design is modular, versatile, play...

Pair of “Eros” side tables, designed by Angelo Mangiarotti and manufactured by Skipper in 1972. Made of white Carrara marble. Excellent vintage condition. The Eros series by Angelo M...

A dining set composed of four “model 121” dining chairs and a “model 778” dining table designed by Afra & Tobia Scarpa in 1965 and produced in I...

“Monk” dining chair designed by Afra and Tobia Scarpa for Molteni in 1973. Made of cognac leather and walnut. Fully restored in Italy. Interesti...

Camaleonda sofa, designed by Mario Bellini and manufactured by B&B Italia in 1972. The set features two big modules with one backrest. Brown cotton velvet upholstery. Fully ...

Set composed of four Medea dining chairs, designed by Vittorio Nobili for Fratelli Tagliabue in 1954. Made of teak plywood, excellent vintage condition. Reported at “Compasso d...

Arco lamp designed by Achille and Pier Giacomo Castiglioni in 1962 and manufactured by the Italian brand FLOS in 1967. Excellent vintage condition. From the outside, it looks like ...

Set of four “Sapporo” dining chairs, designed by Mario Marenco and produced by the Italian manufacturer Mobilgirgi in the 1970s. They feature a ...

“Scuderia” dining table, designed by Carlo Scarpa and produced by the Italian manufacturer Bernini in 1977. Originally, Carlo Scarpa designed the table to restore the stable of Villa Valmarana in Vicenza in 1972. The table features a solid walnut structure. Available also five “Kentucky” dining...

Soriana living room set, designed by Afra and Tobia Scarpa, and produced by the Italian manufacturer Cassina in 1969. The set is composed of a three-seater sofa, a lounge chair and a...

Sesann armchair, designed by Gianfranco Frattini in 1970 and produced by the Italian manufacturer Cassina. It features khaki brown velvet upholstery and a chrome tubular cage as stru...

Set of Six 646" Leggera" dining chairs designed by Gio Ponti and produced by Cassina in 1956. Seater upholstered with red skai faux leather. Light brown ash structure. Meaning" light...

Pair of Sonna Rosen "Sunfeather" lounge armchairs in exceptional condition. These timeless chairs were designed initially by Rosen in 1948, and the ones available are early 1950s edi...