Unknown Toys and Dolls

This is a collection of 5 early sand toys. The look is very graphic. The are makers are McDowell, Chein, Wolverine and Ohio Art. They date from the 1920s. Con...

Vintage Spiral Gumball Machine Vintage Spiral Spin N Drop Gumball Machine - allows all kids to see the gumball make its way down without blinking an eye. Cool piece to add to a play...

This head is from a fair or carnival game. Not sure what the game was, perhaps the head has been used to toss rings over, or maybe you were supposed to throw something in his mouth....

Nine out of these ten banks are of American manufacture, made between the 1950's and the 1970's, while one (the Well's Fargo Stage Coach) was made in China, circa 1990's. Banthrico, Incorporated (Chicago) made four of these banks, while similar type companies made the other six. They manufactured coin savings banks for banking institutions who used them as premiums to those who opened up a savings account. In the case of young children they were given to them to encourage thrift and savings. These (10) banks are a representation of that era 1950 to early 1970's, encompassing enticing savings themes. They were always made of white metal, and typically plated; usually in a copper finish. All of the banks listed below are pictured front, back, and bottom. Four of the banks lack the coin holding trap, which is quite common, as it was typical for children to toss them or lose them eventually upon removing the money from the bank. 1) "Pirate Bank" Circa 1950's; depicts a pirate sitting on top of a treasure chest with a parrot on his shoulder, protecting his booty. Typical original copper finish in white metal; measures 5 1/2" high x 4 1/2" wide x 3 1/2" deep. Copyright marking to the rear "55" , perhaps 1955. Has the coin trap holder but lacks the circular coin trap. Very good condition. Referenced #335 "The Penny Bank Book" by Andy Moore (published 1984)( 2) "Eagle on Cliff" Made by Banthrico Incorporated and dated 1976 (Americana Bicentennial commemoration bank) portrays a proud American eagle perched on a cliff; nice detail to original copper finish with original coin trap in near mint condition. 6 3/8" high. Made for "United Savings Bank" Referenced #145 "Coin Banks by Banthrico" by Jim Redwine (published 2001) 3) "Covered Wagon" Made by Banthrico Incorporated and from the 1950's, by "The Union Banking Company"; depicts a fully loaded chuck wagon with buckets, and a chest ":parked" on western terrain. Finished with copper finish to white metal, with the typical saw tooth coin trap intact, in excellent and all original condition. 4 5/8" long Referenced #432 "Coin Banks by Banthrico" by Jim Redwine (published 2001) 4) "Well's Fargo Stagecoach Bank" Later made promotional bank by Well's Fargo banking institution; in all original and complete condition with original paint colors of red, yellow, and black, authentic looking stagecoach; in very good condition with coin trap intact and no repaint, restoration or dents. 4 3/4" long 5) "Three Little Pigs" Inscribed on front base plate, all original condition with coin trap intact. Slight manufacturing "blow hole" at base of one of the pigs (see image specific to this); unknown manufacture. Made of copper; measures 5" high. 6) "Indian Chief" Put out by "The Multnomah Bank of Portland,m Oregon; depicts an Indian Chief in full feathered head dress and chieftain regalia; with typical Banthrico Company original copper finish and Banthrico original coin trap to the base. Measures 5" high. Circa 1962 Referenced #27 "Coin Banks by Banthrico" by Jim Redwine (published 2001) 7) "Shoe House" Bank Mistakenly called "Old Lady and the Shoe Bank"; this particular bank is of unknown manufacture (could be early Banthrico bank...

All four toys cars are being sold for one price; as a lot. Please see descriptions below. Videos available on request (they display operation). 1) Early Vintage Chein Company All Tin Toy Wind-Up Limousine, American, Circa 1930 This is one of the earlier, New York City based, J. Chein Company, tin toy pieces. They started doing lithography in 1930. This toy wind-up sedan was made circa 1930 and is brightly lithographed and painted in red and yellow, with grey and red balloon wheels. All tin, this car is quite scarce and well proportioned and stream lined with a visor over the windshield, a fancy checkered, red and yellow running board, and three cut out windows to each side of the car; very luxurious and cool looking. Markings consist of "N.J.-44"; the word "Stop" in a logo of some kind; and Chein logo attesting to "Made in U.S.A." manufacture. (see image). Also "marked" and of note are the tires "Chein Balloon Cord" "U.S.A." and "33 x 6 00.6 Ply" Car is from my own collection and is in very good and all original condition with no touch-up paint or repaint, and no restoration of any kind; fabulous colors and presence. The car works fine; see video for operation of the limousine (on request).. Dimensions: 7 1/4" long x 3 1/2" wide x 3" high 2) Rare 911 Porsche Friction Tin Toy by Bandai Toy Co. Made in Japan Circa 1960's Offered here is a whitish/cream colored friction tin toy 911 Porsche circa 1960's, marked at the bottom; "Porsche" in addition to the Bandai Toy Company logo embossed, along with "Made in Japan" designation being noted. The Bandai Toy Company is a post war toy company established in Taito, Japan circa 1950 and is still conducting business today, albeit, it has shifted from toy manufacturing to video toy accessories. This is a very rare toy and is coveted by collectors of both toys and fast cars. Except for the odd and minor scratch here and there, the toy is in very nice, all original condition with absolutely no restoration or touch up to the paint or mechanism (see images). The action and friction functionality works well (see video on request). Motor and engine mechanics and nomenclature are colorfully displayed through the plastic rear trunk window (see image); while the colorful interior can be seen through the side window. Car is all tin, with rubber tires and plastic windows. Dimensions: 10 1/4" long x 4" wide x 3 1/4" high. Note that this toy doesn't become available very often and the few that have turned up in recent years , don't work. 3) Vintage Free Wheeling Green Lithographed All Tin Racing Car. French, Circa 1930 Circa 1930's free wheeling green lithographed all tin racing car, with attached pressed steel driver; it is probably of French manufacturer (the only time I have seen for sale was from a French toy dealer). This scarce toy has markings resembling early racing cars with the streamlined style graphics in yellow and green; standard grill; exhaust four manifolds to each side, and a spare tire attached to the rear; looks like an early Le Mans type car with the spare (see images). Other markings include the number "3:" on each side; "510 x 1" on the rear tire"; and probably the makers mark and logo, which I can't identify, on the top right behind the driver (see images). Not being a wind-up or a friction toy, this racing car was pushed across the floor by hand or/and used as an accessory in a toy train layout setup. The car is in excellent and all original condition (remarkable for a nearly 100 year old floor toy), with no dents, no touch-up paint and absolutely no restoration.. Provenance: From my own collection of toys and banks, having been purchased 33 years ago in 1990. Dimensions: 8 1/4" long x 2 1/2" wide x 2 1/2" high 4) Lehman Auto "Ito" Sedan, Germany, circa 1913 This hand-painted German tin toy was manufactured by the "Lehman Toy Company" in Brandenburg, Germany beginning in 1913. It was made for a number of years after that, enjoying about a 20 year run. Entitled "Ito" it operates by winding up the attached key wind mechanism, placing it on the floor, and watching it go. The car is in very good all original condition with no repairs and no repaint. It runs well. There are a number of markings on the car including "Lehman" with the corresponding logo and the number 679 on the rear. The side of the has the patent information "Pat'd 12 May 1903; 13 Sept. 1904; and U.S.A. 2 Dec. 1913". Hand-painted nicely in red and black with black and gold trim; the hand-painted driver is in blue with flesh tones to the face. Dimensions: 7" long x 3" wide x 3 1/2" high. Note: After 40 plus years of dealing and collecting toys, I am justly qualified to guarantee and present the authenticity of antique and vintage toys and banks; important considering the fakes and reproductions in the marketplace it would behoove an enterprising collector, dealer, or decorator to take advantage of the opportunity to buy as many of the vintage tin...

Vintage Wooden Decorative Mask, mid-20th Century. Wood and fabric. 61 x 24 cm. Good conditions!

This fascinating collection of vintage hand-crank sewing machines, originally designed as toys for children, showcases a wide range of models produced throughout the 20th century. These miniaturized machines were often gifted to young girls, allowing them to learn basic sewing skills while also sparking creativity and craftsmanship at an early age. Beyond their educational value, they are a testament to the industrial craftsmanship of the time, representing the same intricate mechanisms found in full-sized sewing machines. Brands like Singer, Vulcan, Regina, Elna, and Casige are well-represented in this collection, each with their distinct designs and color schemes. Singer, one of the most well-known names in sewing machine history, produced smaller versions of their famous models. Similarly, Vulcan from the UK crafted vibrant red and blue machines, while Regina and Casige from Germany offered delicate, beautifully painted versions. These machines are cherished for their durability, functionality, and charming designs, making them highly collectible today. The first known toy sewing machine...

Ten Piece Set of 20th Century Rococo Style Silver Doll Furniture Grouping of continental 800 silver doll furniture, each miniature exquisitely rendered ...