The Hartner Iron and Mesh Traditional Fire Screen by Betzinger Designs

The Pagosa Brass & Iron Fire Screen is absolutely timeless. So many qualities that make this screen seem like it was made in the 1920s .but yet is so appropriate for so may design st...

Introducing our Meadow Fire Screen, Betzinger Designs Latest Masterpiece which is truly a sculptural piece made from a combination wrought iron and brass which is typical of many ti...

Replica of an antique original. Produced exactly as it used to be made ??and they are thus difficult to distinguish from an old original. Important advantage of this type of fire screen is that, while elegant, you don't really notice it, you just enjoy the fire. It is of a simple yet elegant simplicity. It is beautiful, rustic and classic. It quietly enhances the fireplace's charm. It is present without taking the attention away from the fire and the other fireplace accessories. The black color of this new handmade screen supports this effect. The holes in the mesh are small enough to protect against the sparks, but large enough to limit the heat radiation of the fireplace as little as possible. The fireplace screen fits in both a classic and a modern interior. center panel: 50 cm (19.7") wide, Side panels: each 20 cm (7.9") wide. The functional width is 6 cm (2.4") less for the firescreen to stand by itself, or a functional width of 57 cm (23") up to 89 cm (35"). At a width of 57 cm (23") the screen is 22 cm (8.7") deep and at 89 cm (35") wide it is 13 cm (5.1") deep. Color: black (matt). This fireplace screen is handmade and can therefore show imperfections (paint, finish, etc.) that do not occur in industrial production. We cannot provide any guarantees on these imperfections. We can deliver this type of fireplace screen in different sizes. The number of panels can vary from 2 to 6. It is also available in several heights. It cannot be customized, but due to the possible variations it is suitable for most fireplaces. Contrary to popular belief, it is often not necessary for the fireplace screen to cover the entire height of the inside of the fireplace. A height of 50 cm (19.7") is usually sufficient for a fire screen if a quiet fire is lit with dry, suitable wood. We have a unique and specialized collection of antique and used fireplace accessories...

19th century French Napoleon III 3-panel fireplace screen. The screen is made of brass, iron and iron mesh. It is in a good condition and is fit for use in front of the fireplace.