Skip to main content
Want more images or videos?
Request additional images or videos from the seller
1 of 8

Folding Glass Chair Made with Italian Glass and Oxidized Steel Treated

$11,900per item
£9,098.18per item
€10,479.27per item
CA$16,675.55per item
A$18,616.68per item
CHF 9,754.86per item
MX$227,886.46per item
NOK 123,886.84per item
SEK 116,809.56per item
DKK 78,207.87per item
Quantity
Shipping
Retrieving quote...
The 1stDibs Promise:
Authenticity Guarantee,
Money-Back Guarantee,
24-Hour Cancellation

About the Item

This folding chair is made in Italy from locally sourced and recycled glass and steel. After being repurposed the steel used was treated with superficially with a water-based solution of vinegar and unrefined coarse salt, then treated with beeswax. STEEL: - OXIDIZED STEEL - HANDCRAFTED IN TURIN, ITALY - SUPERFICIALLY TREATED WITH A WATER-BASED SOLUTION OF VINEGAR AND SODIUM CHLORIDE (UNREFINED COARSE SALT) - MAINTENANCE-FREE - TREATED WITH BEESWAX - RECOVERED, RECYCLABLE, MONOMATERIAL 25 MM GLASS: - SOURCED AND MANUFACTURED IN CUNEO, PIEDMONT, ITALY - 7% RECYCLED CONTENT - COMPLIES WITH NATIONAL POLICIES AND REGULATIONS RELATING TO ENERGY SAVINGS AND CO2 EMISSIONS - CRADLE-TO-CRADLE CERTIFIED - INERT MATERIAL, NOT SUBJECT TO HARMFUL EMISSIONS - RECYCLED, RECYCLABLE, MONOMATERIAL NATURAL GLUE: - HOMEMADE NATURAL GLUE DERIVED FROM FOOD INDUSTRY BY-PRODUCTS - NON-TOXIC BEESWAX: - 100% BEESWAX IN A LIGHT EMULSION - DOES NOT CONTAIN SOLVENTS, BIOCIDES OR PRESERVATIVES - MANUFACTURED WITH LOW ENERGY CONSUMPTION - NONTOXIC - LOCALLY SOURCED - RECYCLABLE, BIODEGRADABLE, TRANSPIRABLE Please inquire for assembly instructions and any additional information.
  • Creator:
  • Dimensions:
    Height: 35.44 in (90 cm)Width: 25.6 in (65 cm)Depth: 23.63 in (60 cm)
  • Style:
    Modern (In the Style Of)
  • Materials and Techniques:
  • Place of Origin:
  • Period:
  • Date of Manufacture:
    2012
  • Production Type:
    New & Custom(Current Production)
  • Estimated Production Time:
    Available Now
  • Condition:
  • Seller Location:
    NEW YORK, NY
  • Reference Number:
    1stDibs: LU294839394173

More From This Seller

View All
Italian Steel Chair Cladded in 18th Century Pinus Cembra Treated
By Enrico Marone Cinzano
Located in NEW YORK, NY
This chair is structured in locally sourced Italian steel then covered in recycled, 18th century Italian pinus cembra and treated with linseed oil. CIRMOLO, ANCIENT PINUS CEMBRA: - WOOD ORIGINALLY HARVESTED FROM THE VARAITA VALLEY, PIEDMONT, ITALY - PLANKS RECOVERED FROM DISMANTLED MOUNTAIN CHALETS ORIGINALLY BUILT IN THE 18TH CENTURY - DOES NOT REQUIRE SPECIAL FINISHES BUT CAN BE TREATED WITH NATURAL BEESWAX - THE WOOD WAS TREATED TO CONFORM TO INTERNATIONAL SHIPPING REQUIREMENTS...
Category

21st Century and Contemporary Italian Modern Chairs

Materials

Steel

Contemporary Armchair in Italian Walnut, Steel & Glass w/ Italian Linen Cushions
By Enrico Marone Cinzano
Located in NEW YORK, NY
This armchair is structured in solid black walnut with armrest and legs in glass. The metallic frame and joints are made of oxidized steel. All solid wood is fixed with natural glue, while gaskets are in cork and canvas. All surfaces are then treated with beeswax. The slip covers are made of 100% natural, raw, hand-loomed linen, with interior covers made of 100% cotton. Pillow laces...
Category

21st Century and Contemporary Italian Modern Armchairs

Materials

Steel

Dondolo Lounge Chair in Black with Stainless Steel, Recycled Leather & Mahogany
By Enrico Marone Cinzano
Located in NEW YORK, NY
Considering I come from Torino, the car manufacturing capital, it only made sense that at some point I would extend my work to the automobile industry. I went scavenging through car junk yards and found that the aftermath of that industry produced a wealth of beautiful and extremely well made products which could be re-utilized into making furniture, hence the birth of 'Dondolo'. It's a rocking chair with a foot in the past and one in the future. Still benefitting from the factory-issue moving parts, the original leather Alfa Romeo 166 seat reclines and heats at will, powered by an eco-friendly gel based battery which can be charged with any power outlet. By means of two periscopic arms, it has the added comfort of providing a swinging, retractable work table to rest your laptop, and an efficient dimmable warm-toned LED light, housed in what was a beautiful metal FIAT 500...
Category

21st Century and Contemporary Italian Modern Chairs

Materials

Stainless Steel

Italian-Made Two-Desk Set in 18th Century Pinus Cembra & Steel Sourced in Italy
By Enrico Marone Cinzano
Located in NEW YORK, NY
This two-desk series is made from Italian, 18th century pinus cembra, harvested from the Varaita Valley, and Italian sourced steel. All surfaces have been treated with linseed oil. Measurements for desk: 186 cm W x 76 cm H x 68 cm D Measurements for side desk: 107 cm W x 36 cm H x 62 cm D CIRMOLO, ANCIENT PINUS CEMBRA: - WOOD ORIGINALLY HARVESTED FROM THE VARAITA VALLEY, PIEDMONT, ITALY - PLANKS RECOVERED FROM DISMANTLED MOUNTAIN CHALETS ORIGINALLY BUILT IN THE 18TH CENTURY - DOES NOT REQUIRE SPECIAL FINISHES BUT CAN BE TREATED WITH NATURAL BEESWAX - THE WOOD WAS TREATED TO CONFORM TO INTERNATIONAL SHIPPING REQUIREMENTS...
Category

21st Century and Contemporary Italian Modern Desks and Writing Tables

Materials

Steel

Large Industrial-Style Mirror in Locally Sourced Oxidized Italian Steel
By Enrico Marone Cinzano
Located in NEW YORK, NY
This mirror is made in Italy from locally sourced and treated oxidized steel. Folded, this piece measures H 154 x W 70 cm, and expands to H 205 x W 140 cm. Steel has been superficial...
Category

21st Century and Contemporary Italian Industrial Wall Mirrors

Materials

Steel

Medium Table Lamp 4 in Local Blackened Steel with Italian Glass
By Enrico Marone Cinzano
Located in NEW YORK, NY
This table lamp is made in Italian blackened steel and locally sourced glass, on a stand made with recovered Pinus Cembra from 18th century Italy - all treated with beeswax. This lamp is made for an LED light. CIRMOLO, ANCIENT PINUS CEMBRA: - WOOD ORIGINALLY HARVESTED FROM THE VARAITA VALLEY, PIEDMONT, ITALY - PLANKS RECOVERED FROM DISMANTLED MOUNTAIN CHALETS ORIGINALLY BUILT IN THE 18TH CENTURY - DOES NOT REQUIRE SPECIAL FINISHES BUT CAN BE TREATED WITH NATURAL BEESWAX - THE WOOD WAS TREATED TO CONFORM TO INTERNATIONAL SHIPPING REQUIREMENTS...
Category

21st Century and Contemporary Italian Modern Table Lamps

Materials

Steel

You May Also Like

Lucite Folding Chair by Yonel Lebovici and Bernard Berthet for Marais Int France
By Marais international
Located in Reading, Berkshire
Lucite Folding Chair by Yonel Lebovici and Bernard Berthet for Marais International Known As "Les Invisibles" Seat is composed of three acrylic slats s...
Category

Mid-20th Century French Hollywood Regency Dining Room Chairs

Materials

Stainless Steel

Giancarlo Piretti Plia Lucite & Chrome Folding Chair for Anonima Castelli, 1970s
By Anonima Castelli, Castelli, Giancarlo Piretti
Located in Deland, FL
Introducing the truly iconic "Plia" folding chair. Originally designed in 1967 by Giancarlo Piretti for the venerated Anonima Castelli Company the Plia chair is still in production t...
Category

Vintage 1970s Italian Modern Chairs

Materials

Chrome

Vintage Plona Folding Chair in Smoked Acrylic by Giancarlo Piretti for Castelli
By Castelli, Giancarlo Piretti
Located in Brooklyn, NY
Early Plona desk/accent chair composed of a molded smoked acrylic seat and foldable aluminum frame designed by Giancarlo Piretti for Castelli (ca. 1970, Italy). Collapsible/stackable...
Category

Vintage 1970s Italian Mid-Century Modern Office Chairs and Desk Chairs

Materials

Aluminum

Folding Lucite "Plia" Chair by Piretti for Castelli, Italy
By Anonima Castelli, Giancarlo Piretti
Located in Grand Cayman, KY
A Space Age chrome and transparent lucite folding chair designed by Giancarlo Piretti for Castelli, Italy. With steel frame, seat and back in clear lucite, it represents the realiz...
Category

Vintage 1960s Italian Space Age Chairs

Materials

Chrome

Giancarlo Piretti Plia Folding Chair in Lucite and Chrome for Castelli, Italy
By Anonima Castelli, Giancarlo Piretti
Located in Amsterdam, NL
The Plia folding chair is an inventive and beautiful design by Giancarlo Piretti for Castelli in 1967, Italy. This icon is included in every standard publication on 20th century (fur...
Category

Vintage 1960s Italian Mid-Century Modern Chairs

Materials

Steel, Chrome

Giancarlo Piretti, Original Plia Folding Chair for Anonima Castelli, 1967
By Giancarlo Piretti
Located in London, GB
The Plia is one of Anonima Castelli's all-time landmarks and an iconic example of “Made in Italy” design. Over the years, he was awarded the “compasso d’oro adi” twice. Originally ...
Category

Vintage 1960s Italian Post-Modern Chairs

Materials

Aluminum, Chrome