Nevada Toys and Dolls

Antique Wind-Up Double Decker open air bus by the Ferdinand Strauss Toy Company, New York; circa 1925; is quite a large and substantial toy resembling ver...

Marx "Wonder Cyclist" is the earlier version of this wind-up "Boy on a Tricycle" toy; and not to be confused with the later version by Unique Art called "Kiddy Cyclist". This toy featured is MUCH more rare and more sought after by collectors of early tin wind up toys...

This hand-painted German tin toy was manufactured by the "Lehman Toy Company" in Brandenburg, Germany beginning in 1913. It was made for a number of ye...

This doorstop, also known as "Overhead Swinging Golfer," is more difficult to find than it's "Putting Golfer" counterpart doorstop; which is also made by Hubley. Manufactured by the Hubley Manufacturing Company of Lancaster, Pennsylvania in 1920, this cast iron doorstop is in outstanding all original bright paint with no touch up or restoration of any kind, and in wonderful patina. It depicts an older, grey haired man, with typical knicker golf garb, taking a wild swing at a golf ball resting on the grass. It has a semi "hollow" rear with a "238" factory marking, indicating that it is, in fact, by Hubley and original. It is noted in Jeanne Bertoia's 1985 book on doorstops page 60; and referenced on page 211 of the Smith book on doorstops. A must for the doorstop or golfing memorabilia...

American pottery still bank in the shape of a pig, used for saving coins (usually pennies) to encourage children the importance of thrift. Pottery still banks are somewhat scarce since the typical way to remove coins was to smash the bank open, albeit, with this particular example, perhaps a knife was used for coin removal (note the wear to the coin slot---see images) or perhaps the additional wear is also from many coins having been deposited. The bank is in good all original condition , from an unknown potter (unmarked) circa 1880's, and probably a variant of #633 "Two Toned Pig" in Andy Moore's "The Penny Bank Book" written in 1984 when collecting pottery banks...

All four toys cars are being sold for one price; as a lot. Please see descriptions below. Videos available on request (they display operation). 1) Early Vintage Chein Company All Tin Toy Wind-Up Limousine, American, Circa 1930 This is one of the earlier, New York City based, J. Chein Company, tin toy pieces. They started doing lithography in 1930. This toy wind-up sedan was made circa 1930 and is brightly lithographed and painted in red and yellow, with grey and red balloon wheels. All tin, this car is quite scarce and well proportioned and stream lined with a visor over the windshield, a fancy checkered, red and yellow running board, and three cut out windows to each side of the car; very luxurious and cool looking. Markings consist of "N.J.-44"; the word "Stop" in a logo of some kind; and Chein logo attesting to "Made in U.S.A." manufacture. (see image). Also "marked" and of note are the tires "Chein Balloon Cord" "U.S.A." and "33 x 6 00.6 Ply" Car is from my own collection and is in very good and all original condition with no touch-up paint or repaint, and no restoration of any kind; fabulous colors and presence. The car works fine; see video for operation of the limousine (on request).. Dimensions: 7 1/4" long x 3 1/2" wide x 3" high 2) Rare 911 Porsche Friction Tin Toy by Bandai Toy Co. Made in Japan Circa 1960's Offered here is a whitish/cream colored friction tin toy 911 Porsche circa 1960's, marked at the bottom; "Porsche" in addition to the Bandai Toy Company logo embossed, along with "Made in Japan" designation being noted. The Bandai Toy Company is a post war toy company established in Taito, Japan circa 1950 and is still conducting business today, albeit, it has shifted from toy manufacturing to video toy accessories. This is a very rare toy and is coveted by collectors of both toys and fast cars. Except for the odd and minor scratch here and there, the toy is in very nice, all original condition with absolutely no restoration or touch up to the paint or mechanism (see images). The action and friction functionality works well (see video on request). Motor and engine mechanics and nomenclature are colorfully displayed through the plastic rear trunk window (see image); while the colorful interior can be seen through the side window. Car is all tin, with rubber tires and plastic windows. Dimensions: 10 1/4" long x 4" wide x 3 1/4" high. Note that this toy doesn't become available very often and the few that have turned up in recent years , don't work. 3) Vintage Free Wheeling Green Lithographed All Tin Racing Car. French, Circa 1930 Circa 1930's free wheeling green lithographed all tin racing car, with attached pressed steel driver; it is probably of French manufacturer (the only time I have seen for sale was from a French toy dealer). This scarce toy has markings resembling early racing cars with the streamlined style graphics in yellow and green; standard grill; exhaust four manifolds to each side, and a spare tire attached to the rear; looks like an early Le Mans type car with the spare (see images). Other markings include the number "3:" on each side; "510 x 1" on the rear tire"; and probably the makers mark and logo, which I can't identify, on the top right behind the driver (see images). Not being a wind-up or a friction toy, this racing car was pushed across the floor by hand or/and used as an accessory in a toy train layout setup. The car is in excellent and all original condition (remarkable for a nearly 100 year old floor toy), with no dents, no touch-up paint and absolutely no restoration.. Provenance: From my own collection of toys and banks, having been purchased 33 years ago in 1990. Dimensions: 8 1/4" long x 2 1/2" wide x 2 1/2" high 4) Lehman Auto "Ito" Sedan, Germany, circa 1913 This hand-painted German tin toy was manufactured by the "Lehman Toy Company" in Brandenburg, Germany beginning in 1913. It was made for a number of years after that, enjoying about a 20 year run. Entitled "Ito" it operates by winding up the attached key wind mechanism, placing it on the floor, and watching it go. The car is in very good all original condition with no repairs and no repaint. It runs well. There are a number of markings on the car including "Lehman" with the corresponding logo and the number 679 on the rear. The side of the has the patent information "Pat'd 12 May 1903; 13 Sept. 1904; and U.S.A. 2 Dec. 1913". Hand-painted nicely in red and black with black and gold trim; the hand-painted driver is in blue with flesh tones to the face. Dimensions: 7" long x 3" wide x 3 1/2" high. Note: After 40 plus years of dealing and collecting toys, I am justly qualified to guarantee and present the authenticity of antique and vintage toys and banks; important considering the fakes and reproductions in the marketplace it would behoove an enterprising collector, dealer, or decorator to take advantage of the opportunity to buy as many of the vintage tin...

Shaped like a pyramid this cast iron penny bank was made to commemorate the 200 year anniversary of America; thus inscribed at the top (see image) 1776-1976. It is painted in white (...

This brightly lithographed tin wind-up toy in colors of red, yellow, and blue, with a driver dressed in appropriate motorcycle clothing, depicts a young man driving a delivery cart with "Speed Boy Delivery" printed on each side of the wagon. The manufacturers logo is clearly marked on both sides of the stake wagon and on the right shoulder of the driver "MAR" with a circle around it and "Made in The United States of America, New York, N.Y." around the circumference (see images). The license plate number is "268", which, along with the red painted inside of the drivers arms (as it should be!) indicates this earlier version and authenticity. Nearly 100 years old, it still operates fine and, upon winding the attached wind-up key a few times and placing the toy on the ground, the motorcycle and driver move across the floor on the way to their deliveries; do not over wind. (see video attached to this listing). The toy is completely original and in very good condition, with no repairs or restorations of any kind and no touch up or repaint. The arms and steering handle bars are also original (sometimes replaced) and they have the appropriate paint and markings. This would make a welcome addition to a collection of pre-war Americana. Dimensions: 9 7/8" long x 5 7/8" wide x 5 3/4" high After 40 plus years of dealing and collecting toys, I am justly qualified to guarantee and present the authenticity of antique and vintage toys...

Great item for the wine aficionado, collector, and connoisseur. Made by Department 56 "The Grapevine Winery" is a Christmas village building from the "Original Snow Village Series" m...

Made by J. Chein & Company Circa 1935 in New York City; originally inventoried as #258 (same number as similar looking Popeye toy dated 1932) and was named "Mechanical Clown Barrel Walker". The name of the maker "Chein" is stamped as a logo to the rear of the barrel (see image). This is one of the earlier toys that Chein made. The lithography and hand paint are in gorgeous original condition with bright colors of red and gold to the barrel, flesh tones to the clown, who sports a multi colorful smiling face. The toy works great; simply wind the attached key wind in the back 1/2 revolution; place on the hard surface----the clown waddles across the floor, back and forth, while shaking his head to and fro (see accompanying video with this listing to see it work) In addition to being quite a scarce toy it is even more difficult to find in this fine condition. Often times the head is lacking or replaced from rough usage and surface rarely maintains this beautiful finish. This particular example is completely original with no restorations, repairs, or touch up paint of any kind. There is a small 5/8" superficial indentation to the front top of barrel (see image). This would make a proud addition to any collection of vintage toys or Americana. Dimensions: 7 1/2" high x 3 1/4" wide x 4" deep See my other listings of over 100+ vintage toys and antique children's toy savings banks from which to chose. Provenance: From a recently acquired West Coast collection of fine quality tin toys. Note: After 40 plus years of dealing and collecting toys, I am justly qualified to guarantee and present the authenticity of antique and vintage toys and children's playthings; important considering the fakes and reproductions in the marketplace. My toys operate properly and are as stated and accurately described. it would behoove an enterprising collector, dealer, or decorator to take advantage of the opportunity to buy as many of the vintage...

Penny Toys were just that; toys made to sell for a penny or very inexpensively. This particular toy was manufactured in Germany (probably Nuremberg) for the ...

Very difficult antique toy to come by, especially to find with the original box, as this example. In excellent and all original condition and paint in bright blue, white, and yellow paint and lithography with no touch up; there is zero restoration, and the toy is in outstanding operating condition; just wind up the attached wind up key on the back of the boy and the he dances around in a circular motion for quite some time while seemingly playing his accordion (see the video attached). "Dancing Dutch Boy" is an all tin wind up toy...

The term "spelter" refers to a zinc/lead metal compound used to pour and make castings. Because of the thinness of the castings there is great detail to the subject matter of these banks. Spelter banks...

Circa 1930's free wheeling green lithographed all tin racing car, with attached pressed steel driver; it is probably of French manufacturer (the only time I have seen for sale was from a French toy dealer). This scarce toy has markings resembling early racing cars with the streamlined style graphics in yellow and green; standard grill; exhaust four manifolds to each side, and a spare tire attached to the rear; looks like an early Le Mans type car with the spare (see images). Other markings include the number "3:" on each side; "510 x 1" on the rear tire"; and probably the makers mark and logo, which I can't identify, on the top right behind the driver (see images). Not being a wind-up or a friction toy, this racing car was pushed across the floor by hand or/and used as an accessory in a toy train layout...

Diminutive late 1940s "penny toy like" wind-up tin toy platform train modern and sleek looking for that era; it is hand painted and lithographed in bright co...

The term "spelter" refers to a zinc/lead metal compound used to pour and make castings. Because of the thinness of the castings there is great detail to the subject matter of these banks. Spelter banks...

This seldom seen bank is technically a mechanical bank but basically it is a still bank with a slight mechanical function, that being; once it is full of coins, it opens up automatic...

Made to commemorate the Rock and Roll Hall of Fame located in Cleveland, Ohio, this cast aluminum mechanical bank depicts Elvis Presley in full gala attire, typical of Elvis, with wh...

Offered are (3) highly collectible Department 56 Christmas Village items. 1) "The Farmer's Co-op Granary" was one of the buildings issued in 1998 as part of the "Original Snow Villa...