Seating

A classic, original, early production Charles Eames Evans Products, DCW (dining chair wood) in red analine dye.

Red aniline dye LCW lounge chair, designed by Charles and Ray Eames and manufactured by Herman Miller. The aniline-dyed wood is vibrant and rich, showcasing the dramatic grain undern...

A handsome example of the Billy Wilder chaise lounge by Ray and Charles Eames for Herman Miller. In softpad and high-quality black leather on a eggplant color base. Six cushions conn...

Designed in the late 1940s by Charles Eames, this chair has cemented itself in Mid-Century Design like very few other pieces. Early models like this are difficult to come by and are very rarely in such good condition, as many have been worked on in some way or another before their value shot up. These chairs feature a super sleek design of steam-bent plywood, an incredibly innovative technique pioneered by Herman Miller in collaboration with the Eames's and manufacturing firm Evans. The large seat and back are mounted to a molded plywood base with rubber shock mounts, another Eames staple. This allows them to have excellent contrast through spacing, which gives them an excellent stance, almost insect-like. Both are early chairs with the 5-2-5 screw configurations beneath. This pair features all original hardware, finish, and shock mounts. Very few blemishes, and those that exist are minimal, barely visible even in our high-res pictures. At this time, we have two early pairs, as seen in in photos. We also have another single early model, and two extremely rare pre-production chairs with the accompanying molded plywood coffee table...

Magnificent and rare 2nd generation Brazilian Rosewood and black leather lounge chair and ottoman by Charles and Ray Eames. This chair retains its super rare double ring back black ...

Original 1960s molded fiberglass parchment white shell chairs on stacking base, designed by Charles and Ray Eames for Herman Miller. Gleaming shells ...

Lounge Chair and Ottoman, pair, Charles and Ray Eames, Vitra Production 1990s, United States, 1956 (original design). Bent plywood frame, white-colored leather upholstery, and die-ca...

Set of four Eames for Herman Miller DCM chairs . Calico Ash grain laminate wood on chrome steel frames . Wood is in original finish which does show some wear , chrome frames are in f...

Swivel stool by Charles and Ray Eames for Herman Miller, c.1970s, USA. The stool features a fiberglass shell seat with orange Naugahyde upholstery. The stool can be used for an offic...

Classic rosewood and black leather ottoman designed by Charles and Ray Eames by Herman Miller, circa 1969, original condition.

The Eames sofa compact works where bulkier sofas don’t. The clean profile and crisp, light scale evolved from a built-in sofa that Charles and Ray Eames designed for the living room ...

A rare 1956 first year production of the iconic 670/671 lounge chair with spinning ottoman by Ray and Charles Eames for Herman Miller. The spinning ot...

Pair of Herman Miller produced original Eames Molded Shell Chair in a durable, 100 percent recyclable polypropylene. The subtle matte texture of the re-engineered plastic shell maint...

Beautiful dining or conference chair EA108, part of the iconic Aluminum Series, designed by Charles & Ray Eames for Herman Miller (US) / Vitra (EU). Exceptional comfort is guaranteed...

Mid-Century Lounge Chair and Ottoman by Charles & Ray Eames

Lounge Chair, Charles and Ray Eames, Vitra Production 1990s, United States, 1956 (original design). Bent plywood frame with rosewood finish, leather upholstery, and die-cast aluminum...

This is an Eames Aluminum Group Management Chair, Model EA335, originally designed by Charles and Ray Eames for Herman Miller in 1958. These particular examples were produced in the ...

These are Eames Aluminum Group Soft Pad Management Chairs, Model EA435, initially designed by Charles and Ray Eames for Herman Miller in 1969. These examples date to the 1990s. Their...

LCW lounge chairs by Charles and Ray Eames in excellent original condition from around 1960-70s

Genuine set of Mid-Century Modern Eames for Herman Miller MKX-l wire mesh dining chairs. The chairs feature the iconic wire mesh seat conjoined ...

This authentic Eames for Herman Miller Thin Pad Executive Height office chair from the Aluminum Group Collection was manufactured in 2015. This executive height chair features a tall...

Original 1960s molded fiberglass shell chairs in Ultramarine Blue, designed by Charles and Ray Eames for Herman Miller. Gleaming shells are in original condition, each with a distinc...

Italian modern black leather and metal lounge chair 670 671 Eames for ICF, 1970s Armchair and pouf or chaise longue mod. 607 and 671 with black painted wooden frame. The armchair is ...

The first fiberglass Eames chairs were produced by Zenith Plastics. The early Zenith shells are distinctive for their high fiber content and larger, more substantial rubber shock mou...

Iconic Charles & Ray Eames DCW dining side chairs in Ash plywood. Early Herman Miller production from the fifties (5-2-4 screw configuration), just after Herman Miller took over prod...

This is an early Aluminum Group 684 lounge chair and matching ottoman by Charles and Ray Eames for Herman Miller. Extremely cool and comfortable piece despite the wear. We're selling...

This authentic Eames for Herman Miller Soft Pad Management Height black leather office chair from the Aluminum Group Collection was manufactured in the 2000s. This classic mid century modern office chair was first introduced in 1969 by Charles and Ray Eames as the luxury model of the 1958 Aluminum Group line. This management height chair features black leather upholstery, polished aluminum five-star swivel base, armrests and rolling casters. The comfortable, contoured ergonomic design features thick, plush cushions and a 360 degree smooth swivel seat with manual lift adjustable height and backrest tilt. An iconic and collectible desk chair perfect for home or office. Eames fabric...

This is an Eames Aluminum Group Soft Pad Executive Desk Chair, Model EA437, initially designed by Charles and Ray Eames for Herman Miller in 1969. These examples date to circa 2010s....

This authentic Eames for Herman Miller Soft Pad Executive Height desk chair from the Aluminum Group Collection was manufactured in the 2000. This executive height chair features a ta...

Royal House Antiques is delighted to offer for sale this now discontinued, Limited Edition, Ivory white leather upholstered, American Cherry Wood framed, Vitra Eames lounge armchair ...

This model 513, or shape "B" walnut stool by Charles and Ray Eames was one of three shapes designed for the lobby of the Time Life building. This design features a pleasing combinati...

This is a massively unusual Herman Miller Eames Lounge Chair in Zebrawood, accompanied by a complimentary period-correct Eames Ottoman in Rosewood. Models 670 and 671 were initially ...

We have eleven original 1960s Eames fiberglass shell chairs with original H bases. Narrow mount. Lovely rich brown color. These have their original finish and are gorgeous, gleaming,...

Charles and Ray Eames 'Aluminum Group' lounge chair model EA124 and ottoman model EA125. This is an early production one-owner example that has been very well ...

We are delighted to offer for sale extremely rare and important lightly restored, original, Herman Miller No1 1960's black leather and Rosewood lounge armchair and ottoman This is...

Soft Pad Chair by Eames for Herman Miller Length- 22 3/4 Depth- 23 Height at it's lowest- 32 Height at it's tallest- 34 Seat Height at its lowest- 20 Arm Height at its lowest- 25 Fo...

Mid-Century Lounge Chair and Ottoman by Charles & Ray Eames for Herman Miller for ICF

This is an Eames Aluminum Group Management Desk Chair, model EA335, originally designed by Charles and Ray Eames for Herman Miller in 1958. These particular examples date to 2007. Th...

If an employee of Herman Miller were to have a child, they were given an Eames "RAR" rocking chair to rock the newborn. It would be marked with a small placard commemorating the name...

These are Eames Aluminum Group Soft Pad Executive Desk Chairs, Model EA437, initially designed by Charles and Ray Eames for Herman Miller in 1969. These pieces are newer examples, da...

This is an original Eames Lounge Chair and Ottoman, model 670 and 671, designed by Charles and Ray Eames for Herman Miller in 1956. This set dates to 1964, per its label. The shells ...

This is an original Eames Lounge Chair and Ottoman, models 670 and 671, designed by Charles and Ray Eames for Herman Miller in 1956. This set dates to ca. 1958. The shells on this se...

Awesome example of the Charles and Ray Eames LAX molded fiberglass arm shell chair for Herman Miller in one of the original colors, lemon yellow. This is an early chair made by Zenit...

These are Eames DSR Chairs, originally designed by Ray and Charles Eames in 1951 for Herman Miller. These particular examples date to 1962. These chairs feature molded fiberglass she...

This is an ES-108 Three-Seat Teak Sofa, initially designed by Ray and Charles Eames for Herman Miller in 1984. This example dates to the 1990s. Its design consists of a solid aluminu...

This is an Eames Aluminum Group Management Desk or Side Chair, model EA-108, designed by Charles and Ray Eames for Herman Miller in 1958. These examples were produced in 2012. The li...

This is an ES-108 Three-Seat Walnut Sofa, initially designed by Ray and Charles Eames for Herman Miller in 1984. This example dates to the 1990s. Its design consists of a solid alumi...

This is an original Eames Lounge Chair and Ottoman, models 670 and 671, designed by Charles and Ray Eames for Herman Miller in 1956. This set dates to 1964. The shells on this set ar...

We are delighted to offer extremely rare and important pair of fully restored, original, Herman Miller No1 & Herman Miller Hillie circa 1958-1960 black leather and Rosewood lounge armchairs and ottomans These are pretty much the most iconic and well known armchair and ottoman ever made, exhibited countless times, displayed in the V&A, Metropolitan Museum of Art, winners of countless awards these are the simply put the finest suite around They have been on a journey, I’ve had all pieces stripped to the bare shells, the frames have been washed back and traditionally French polished, the leather all restored and hand dyed the original nero black, they are the finest example pair anywhere in the world today One suite has the black Herman Miller No1 label, the other, the earlier redish Herman Miller Hillie label Condition wise, the restoration has been done in such a way to keep all the original charm and patina but make them gallery ready, they will have age and use related patina marks here and there but mostly they are in very fine order Dimensions armchairs Height:- 80.5cm Width:- 85cm Depth:- 86.5cm Seat height:- 41cm Dimensions ottomans Height:- 42cm Width:- 65.5cm Depth:- 53.5cm Please note all measurements are taken at the widest point, MUST READ! The Eames Lounge Chair and ottoman are furnishings made of molded plywood and leather, designed by Charles and Ray Eames for the Herman Miller furniture company. They are officially titled Eames Lounge ( 670 ) and Ottoman ( 671 ) and were released in 1956 after years of development by designers. It was the first chair that the Eameses designed for a high-end market. Examples of these furnishings are part of the permanent collection of New York's Museum of Modern Art. Design Charles and Ray Eames sought to develop furniture that could be mass-produced and affordable, with the exception of the Eames Lounge Chair. This luxury item was inspired by the traditional English club chair. The Eames Lounge Chair is an icon of Modern style design, although when it was first made, Ray Eames remarked in a letter to Charles that the chair looked "comfortable and un-designy". Charles's vision was for a chair with "the warm, receptive look of a well-used first baseman's mitt." The chair is composed of three curved plywood shells covered with veneer: the headrest, the backrest and the seat. The layers are glued together and shaped under heat and pressure. The shells and the seat cushions are essentially of the same shape, and composed of two curved forms interlocking to form a solid mass. The chair back and headrest are identical in proportion, as are the seat and the ottoman. The products have changed in various ways over time. Beginning in 1956 and running through the very early 1990s, the shells were made up of five thin layers of plywood which were covered by a veneer of Brazilian rosewood. The use of Brazilian rosewood was discontinued in the early 1990s, and current production since then consists of seven layers of plywood covered by finishing veneers of cherry, walnut, palisander rosewood (a sustainably grown wood with similar grain patterns to the original Brazilian versions), and other finishes. Small changes include the sets of spacers between the aluminum spines and the wood panels, originally of rubber, later hard plastic washers, and the number of screws securing the armrests, originally three, changed to two in second-series models, while the "domes of silence" (glides/feet) on the chair base originally had thinner screws attaching them to the aluminum base than those on later chairs, and the zipper around the cushions, either brown or black on early models, was later black only. Further, early ottomans had removable rubber slide-on feet with metal glides, and early labels are of oblong foil. History The Eames Lounge Chair first...

This is an Eames Time Life Executive Desk Chair, model ES107, initially designed in 1961 by Ray and Charles Eames for Herman Miller. This design was born as a bespoke concept for the...

A fantastic vintage 1970s example of the Eames Time Life Executive chair, quite simply the ultimate desk chair. Supreme comfort with amazing tilt back mechanism. Built to last foreve...

This is an Eames Aluminum Group Management Desk Chair, designed by Charles and Ray Eames for Herman Miller in 1958. This particular chair was produced in the 2010’s. The design spo...

Very nice early production Charles and Ray Eames designed dining chair metal (DCM ). Clean chrome frame supports ash grain seat and back. Retains original Eames Evans Herman Miller w...

A gorgeous and extremely rare pair of early 1960s caramel leather Eames DAX armchairs. A very special collaborative pair between Herman Miller and Vitra, these stunning armchairs work as lounge chairs, occasional chairs or dining chairs and will add stunning two-tone colouring and a fabulous Space Age 1960s aesthetic to any interior. The DAX armchair was first produced in 1952 and is the most sought-after version of Charles and Ray Eames's classic fibreglass chairs, which revolutionised 20th Century furniture. Sometimes called the Eames 'Shell Chair', 'Bucket Chair' or 'Rope Edge Chair', this pair of DAX armchairs (which stands for Dining Height Armchair X-Base) has 'Greige' coloured (a combination of grey and beige) fibreglass shells, one of the three original Eames fibreglass shell colours produced from the early 1950s. This pair is fourth generation (made from 1959 onwards) as they have the improved white nylon glide feet and 'H-bases', so were likely manufactured in the early 1960s. These wonderful armchairs features four-legged tubular steel chrome H-bases above all original & complete nylon glide feet. They have 'greige' fibreglass 'V'-stamped (for Vitra) shell seats, which join to the bases via Herman Miller marked black shock mounts and are upholstered in beautiful caramel leather with lovely contrasting white plastic bordering. Much sought after for their simplicity, beautiful lines and their status as design icons, the gorgeous colouring and extremely rare collaborative authenticity of this pair of DAX chairs makes them even more special. Comfortable, iconic, exceptionally rare and effortlessly cool, these are a stunning and timeless pair of armchairs. HERMAN MILLER / VITRA COLLABORATION & MARKINGS Ray and Charles Eames began designing for Herman Miller in the late-1940s, since when the Herman Miller company has manufactured Eames furniture including the DAX chair, and in 1957 the Herman Miller company assigned the Swiss company Vitra the manufacturing licenses for the European market, since when they have also made Eames furniture including the DAX chair. These two DAX chairs both have the Herman Miller logo markings to their black shock mounts and also have an embossed 'V' (for Vitra) on the underside of fibreglass shells, next to which the original Herman Miller sticker would have been placed. We therefore surmise that this pair would have been a collaborative effort produced for the European market between Herman Miller, who may have supplied the base (or at the very least the shock mounts) and Vitra, who made the fibreglass shell (and possibly all of the chair apart from the shock mounts.) Despite extensive digging we haven't been able to find a detailed history of such collaborations between Herman Miller and Vitra, as it's rather nuanced and may have been carried out ad-hoc basis that wasn’t recorded in the histories of the companies. However, we think it highly plausible such collaborations would have happened, as both companies made the same Eames products and so could well have used each other's know-how and parts in the interest of keeping the Eames brand and products up to the highest specifications possible. Hence this very rare pair of twice-marked Eames DAX chairs...

These are Eames DSS Chairs, originally designed by Ray and Charles Eames in the 1950s. These particular examples were produced by Herman Miller in the USA in 2015. The listed price i...

These are Eames Aluminum Group Management Chairs, originally designed by Charles and Ray Eames for Herman Miller in 1958. These particular examples were produced in 2009. Their desig...

These vintage mid century modern black Model 3475 Eames Time Life Lobby Chairs designed by Charles & Ray Eames for Herman Miller were produced in the 1980s. This classic office chair...

This is an LCW Lounge Chair, originally designed by Charles and Ray Eames in 1948. It is an early Herman Miller example featuring the 5-2-4 screw pattern, dating it to ca. 1953. The ...

These are Eames Aluminum Group Management Desk Chairs, Model EA335, designed by Ray and Charles Eames for Herman Miller in 1958. These particular examples were produced in 2007. The ...

Herman Miller Eames DSR fiberglass chair on Eiffel base in elephant hide grey. Chair dates to 1961. Base has excellent patina and new glides. No s...