Evans Products Company Furniture

The WWII molded plywood leg splint, designed by Charles Eames and manufactured by Evans Mfg., is a pioneering example of functional design and innovative use of materials. Created in...

LCW (Lounge Chair Wood) chair created by Charles and Ray Eames around 1945. Chair sold by Herman Miller, but produced by Evans Plywood in 1948-1949. The 5-2-5 screw arrangement bene...

Designed in the late 1940s by Charles Eames, this chair has cemented itself in Mid-Century Design like very few other pieces. Early models like this are difficult to come by and are very rarely in such good condition, as many have been worked on in some way or another before their value shot up. These chairs feature a super sleek design of steam-bent plywood, an incredibly innovative technique pioneered by Herman Miller in collaboration with the Eames's and manufacturing firm Evans. The large seat and back are mounted to a molded plywood base with rubber shock mounts, another Eames staple. This allows them to have excellent contrast through spacing, which gives them an excellent stance, almost insect-like. Both are early chairs with the correct screw configurations beneath. This pair features all original hardware, finish, and shock mounts. Very few blemishes, and those that exist are minimal, barely visible even in our high-res pictures. At this time, we have two early pairs, as seen in in photos. We also have another single early model, and two extremely rare pre-production chairs with the accompanying molded plywood coffee table...

One of the nicest examples I ve owned in quite a while, stunning figured birch plywood, circa early 1946-1947, L C W (Lounge chair wood) designed by Charles and Ray Eames, Manufactur...

This is an original OTW Coffee Table, designed by Charles and Ray Eames and manufactured by the Evans Products Company in 1946. The acronym OTW stands for Oblong (O) Table (T) with a...

Early ebonized DCM dining chair, designed by Charles and Ray Eames, made by Evans for Herman Miller. Molded plywood has great age, wearing its original patina handsomely. Original fi...

Spitfire pocket lighter designed by Evans. Rare automatic spitfire pocket lighter, created in America by the Evans Company, back in the 1940. This very handsome piece has been craft...

Listed for sale is an original maple Eames OTW coffee table, produced by Evans approx. 1946. This particular example is all original. The table has been well...

This is an early LCM Chair, originally designed by Charles and Ray Eames in 1946. The piece was produced by Evans/ Herman Miller sometime in the late 1940s. Its design features a ben...

Designed in the late 1940s by Charles Eames, this chair has cemented itself in Mid-Century Design like very few other pieces. Early models like this are difficult to come by and are very rarely in such good condition, as many have been worked on in some way or another before their value shot up. These chairs feature a super sleek design of steam-bent plywood, an incredibly innovative technique pioneered by Herman Miller in collaboration with the Eames's and manufacturing firm Evans. The large seat and back are mounted to a molded plywood base with rubber shock mounts, another Eames staple. This allows them to have excellent contrast through spacing, which gives them an excellent stance, almost insect-like. Both are early chairs with the 5-2-5 screw configurations beneath. This pair features all original hardware, finish, and shock mounts. Very few blemishes, and those that exist are minimal, barely visible even in our high-res pictures. At this time, we have two early pairs, as seen in in photos. We also have another single early model, and two extremely rare pre-production chairs with the accompanying molded plywood coffee table...

Listed for sale is an original set of five DCM chairs, designed by Charles and Ray Eames. This particular set dates to approximately 1948 and was produced by Evans plywood company (the earliest manufacturer of these chairs). Notable also is that they were specified in Walnut, which contrasts the metal legs beautifully. These chairs retain their original feet, shock mounts (some may have been replaced during their lifetime), and screws. The walnut panels may show some wear. Please see photos. Their Evans production can be confirmed based primarily on the feet and headrest connection. Only early Evans examples had this round, circular detail connecting the backrest to the frames. Please note that the chair frames have not been cleaned, as some collectors prefer fully original examples. If requested, we can certainly clean the frames to remove the oxidation noted in the photos. Another set of four Evans DCM...

Listed for sale is a very rare and early Evans plywood coffee table, produced by Evans Molded Plywood Division and designed by and with Charles and Ray Eames. Two or so of these tab...

Rare RED ANILINE RED LCW (Lounge Chair Wood) chair created by Charles and Ray Eames around 1945. Chair sold by Herman Miller, but produced by Evans Plywood...

This is a pair of DCW Dining Chairs in Calico Ash, originally designed by Charles and Ray Eames in 1946. These are ultra-rare, early examples that were produced by the Evans Plywood ...

Very nice early production Charles and Ray Eames designed dining chair metal (DCM ). Clean chrome frame supports ash grain seat and back. Retains original Eames Evans Herman Miller w...

What more can be said about this chair. Such a revolutionary design which took a fair amount of time to perfect. This particular chair is crafted from birch and bears all the origina...

Very early Charles Eames and Ray Eames LCM, for Evans Products Company, Venice, CA, circa 1945. Red aniline-dyed molded plywood, polished c...

Spectacular matched set of red aniline dye LCW lounge chairs, designed by Charles and Ray Eames and manufactured by Evans Product Company (before Herman Miller production). Aniline-...

This is a pair of DCW Dining Chairs in Calico Ash, originally designed by Charles and Ray Eames in 1946. These are ultra-rare, early examples that were produced by the Evans Plywood ...

A rare Charles and Ray Eames CTW1 coffee table. An early version of the OTW (Oblong Table Wood) coffee table. The CTW1 was introduced in the 1940s and was first produced by Evans Ply...

Listed for sale is one of the rarest and best documented sets of Eames DCM chairs in existence. First and foremost, it is a set of six original matching maple DCM dining chairs, prod...

Hard to find pair of early LCM chairs designed by Charles and Ray Eames and manufactured in the 1940s by Evans Products Company. These chairs are in very good condition with minor we...

Rare Herman Miller DCW chair from the late 1940s featuring the elusive Evans Products label. Appears to have its original black aniline dye.. worn thru in several areas,, A true co...

This is an Eames DCM Chair, originally designed by Ray and Charles Eames in 1946. This particular example was produced by Evans in the USA C. 1949. The chair's design features a weld...

This is a pair of LCW Lounge Chairs, initially designed by Charles and Ray Eames in 1947. The listed price includes the pair of chairs as shown. They are early examples, dating to ci...