Shell Table Clocks and Desk Clocks

A good English Edwardian silver and tortoiseshell hump backed carriage clock. With a French 8 day movement with lever escapement. Porcelain dial. Hallmarked for 1912 and with London ...

This 19th century clock is stunning with its diamond shaped rippling clock frame of ebony painted wood. Mother-of-pearl floral and foliate designs are inlaid in differently stained m...

A stunning 19th century wall clock, diamond in shape, with rippling clock frame of ebony-painted wood. mother of pearl astral and filigree designs is inlaid in differently stained ma...

Beautifully carved figural giltwood pocket watch stand.

Brass frame nickel plated clock face made of polished steel and fixed on pink colored glass made by Kienzl in the late, 1930s. Fitted with a mechanical movement. On request can be re...

French Style Mystery Gravity Driven Gilt Incline Rolling Clock - No Spring or Battery This very unusual clock is never wound with a key, but does featur...

This is an Art Nouveau Style Table Clock. It depicts a small balloon shape clock mounted in copper color metal. A standing young nymph is adorning the front of the case while holding its face. The white enamel round dial of the clock has Arabic numbers and is also decorated with a garland of roses and leaves around the center. The gold color metal hours and minutes hands are made of scrolls of leaves. At the bottom of the dial face is hallmarked New Haven Clock...

For those who enjoy the fine quality of blue and white German porcelain from the middle of the last century, this is a particularly fin...

This enameled silver desk clock is unsigned, so a specific maker cannot be identified, but the case was made in France, and the movement in Switzerland in the period and style of Art Deco. The silver content of the case has not been tested, but is believed to be Continental or .800 or just under .925 sterling, The front of the clock is ornately enameled with raised bright red flowers on each corner with contrasting black and red geometric panels with green accents, which are duplicated on the sides. The hinged back opens to gain access to the winding mechanism and the high grade Swiss movement has been professionally serviced and works well. Although barely visible, the clock is stamped on the bottom with a French...

Italian wall clock with graphic design by Kurt B. Delbanco for Morphos, 1980s. Wall clock, with geometric and graphic design in primary colors, black and gray. Produced by Morphos in...

19th century bronze inkwell A bronze inkwell in 2 colors in a sleek round shape with 2 armrests with the head of a dragon to lay a pen on. The lid of...

For your consideration is a mystery Water Wheel Industrial Ball Bearing Clock. It comes with an 8 day movement and keeps very good time!! This water wheel industrial clock has a big paddle wheel on the right side which hold a a set of small steel ball bearings. The weight of these balls is propelling the clock. Please note the time shows a thin glass dial with Roman numerals. Every 60 seconds, a small ball drops down from the water wheel onto the track where the steel ball rolls to the left side. The bucket catches the ball and move it up one by one. Every 60 seconds, a steel ball drops from the left bucket on the channel to the waterwheel. Then the bucket drops down and go around to catch another ball bearing. The loops goes on as the clock keeps on running. The buckets chain is made of brass and nicely done. The power is received from an 8 day fusee movement inside the solid hardwood base, red ash. And the clock has a pendulum on the back to regulate the timing. The whole animation of this clock is just like a waterwheel except it's ball bearing "flowing" through channels and there is a clock on the big water wheel. The clock is protected by a glass dome. It measure 17-3/4" tall, 17-3/4" wide, and 8-3/4" deep including the glass dome. I'm sure this clock will upscale any clock store...