Isokon Tables

Great complete set of Bauhaus School Breuer designed tables (Laccio) manufactured by Stendig, made in Finland. This vintage suite includes 2 rectangular coffee tables (53 W x 19 D x ...

- 1940s - Czechoslovakia - Designed by Marcel Breuer - Model B9 - Manufacturer: Kovona - marked by paperlabel - wooden parts restored - chrome original and polished

Rare set of nesting tables designed by Paul McCobb for Winchendon Furniture. The rectangular tables nest, for easy storage and display. Both tables are selling in as is, as found condition, both show significant cosmetic wear, and will need to be refinished, the smaller table is missing the screw in end cap feet, please see images. Although the tables need some restoration, they are an unusual and hard to find form, and will clean up nicely as the tops are solid wood, and the wrought iron frames can easily be repainted. Larger Table 36 W x 18.5 D x 20 H inches Smaller Table 24...

- 1930s - Czechoslovakia - Designed by Marcel Breuer - Model B9 - original

Marcel Breuer; Nesting; Plywood; Table; Isokon; Coffee Table; Side Table; Modernism; Walter Gropius; Ludwig Mies van der Rohe; Bauhaus; Architecture; Architect; New York; USA; England; Isokon Furniture; 1936; 1930s; Wood; Lacquered; Minimal; Modern; Minimalism; Marcel Breuer Nesting plywood coffee table for Isokon, designed in 1936 in England. This Nesting table was originally part of a series of five pieces. As a true landmark in 20th-century furniture design, these Nesting tables were re-issued in collaboration with Margaret Howell...

Very stylish set of four wooden tables that fit underneath each other. The tables were designed by Josef Hoffmann for Austrian maker Wittmann in the early 20th century. Most were l...

The Thonet B 9 designed in 1920´s by Marcel Breuer is one of the most popular furniture designs to have emerged at the Bauhaus. Unusual version with uniquel...

Beautiful set of Edward Wormley for Dunbar nesting tables. Signed with big brass D. Largest table measurements are below. Sm...

Black perforated sheet metal nesting tables by Mathieu Matégot. Very good original condition. A similar model is reproduced on p.219 in the book "Mathieu Matégot" by Jousse Entreprise.

- Chrome plated parts in good condition with some signs of use. - Top desk has been relacquered some times ago and its in good condition.

A classic example in black and white. White table is 21.5" H x 18.5 x 17.75.

Isokon 'Plus' birch plywood dining table by Windmill Furniture. Originally designed by Marcel Breuer for Isokon. Labelled. Circa 2000. This size table is no longer in production. The table is in excellent condition, the top having been sympathetically re-finished with a smooth waxed finish. Showing minimum wear, there is a slight veneer nick replaced to the top, and a very very faint ring mark to the top, which is barely noticeable. Please refer to photograph number 10. The two early Isokon Venesta stools photographed with the table are listed separately. The Isokon dining table was one of a number of plywood pieces designed by Marcel Breuer for the Isokon Furniture Company in the late 1930’s. Now considered a Modernist classic, the dining table was originally used in the Isobar Restaurant and Club at the Lawn Road Flats in Hampstead (where Breuer lived) paired with the Isokon Stool...

Moulded birch veneered plywood Largest Table Width - 61 cm - 24.01 inches Depth - 46 cm - 18.11 inches Height - 37 cm - 14.56 inches Medium Table Width - 61 cm - 24.01 inches Depth - 42.5 cm - 16.73 inches Height - 35 cm - 13.77 inches Smallest Table Width - 61 cm - 24.01 inches Depth - 39 cm - 15.35 inches Height - 33.5 cm - 13.18 inches An important early set of three Marcel Breuer Nesting Tables, designed in 1936 for Isokon and produced in Estonia. Breuer designed the tables as a compact set of three graduated forms, each constructed from a single continuous sheet of bent birch plywood. The simplicity of the construction is remarkable, with the plywood curving down from the top to form the sides and feet without the need for separate legs. When not in use, the three tables fit neatly beneath one another to form a compact group. The design belongs to the particularly important period following Breuer's arrival in Britain in 1935, when he began working with Jack Pritchard and Isokon and exploring the possibilities of plywood furniture. Together with the Long Chair, the Nesting Tables became one of the most recognisable designs to emerge from Breuer's work for the company. This is an original matching set of three early-production tables. Each carries the impressed “Made in Estonia” stamp, identifying the set with the early Estonian production of Isokon furniture. The provenance is particularly interesting. The tables were acquired directly from the same family as our early Marcel Breuer Long Chair...

UK / 1970 / set of 3 nesting tables / G-plan / Vintage / Mid-century Vintage set off three nesting tables designed and manufactured by British cabinet maker G Plan in the mid-twenti...

Moulded lacquered beech veneer Largest Table Width - 61 cm - 24.01 inches Depth - 46 cm - 18.11 inches Height - 37 cm - 14.56 inches Medium Table Width - 61 cm - 24.01 inches Depth ...