Zigzag Modern Lighting

Verner Panton SP1 Spiral Pendant Light designed and made by J Lüber AG rare original edition, designed 1969 and manufactured in the late 1960s, before it went into mass production wi...

Poul Henningsen (Danish 1894-1967) PH-3.5/2 Pendant Light red and white lacquered zinc top shade, frosted glass middle and lower shade, with browned brass socket house. The shade fit...

Paavo Tynell Pendant Light, model A 1957 designed 1950s and manufactured by Taito/Idman, Finland in brass, with pierced shade and counterweight mechanism height adjustable with long ...

PAAVO TYNELL (Finnish 1890-1973) Wall light, model K8-11 made by Idman, Finland 1950s signed to inside brass with pierced decoration 27cm high, 17cm wide, 21cm deep Rare example, in...

Tobia Scarpa Fantasma floor light, designed 1961 made by Flos, Italy The Fantasma, designed by Italian architect Tobia Scarpa and introduced by Flos in 1961, is an iconic example of...

Verner Panton (1926-1998) VP Globe 60 designed 1969 made by Louis Poulsen, Denmark silver, red and blue, acrylic and aluminium This is an early original example of the rare large s...

Angelo Lelii Pendant Light or 'Lampada da soffito' made by Arredoluce, Italy circa 1953 Yellow painted metal conical shade with decorative piercing, brass mounts (ceiling cup not or...

Isamu Noguchi Akari Light Sculpture, model S2 suspension lamp with sun and moon ideogram together with the original paper bag stamped S2 Noguchi designed his series of Akari light s...

Gino Sarfatti Floor Light, model 1086 designed 1961 and made by Arteluce, Italy black enamelled steel and aluminium 110cm high, the base 17cm diameter Arteluce label to inside of s...

Gino Sarfatti Floor Light, model 1076/N designed 1957 and made by Arteluce 162cm high, 26cm diameter black enamelled iron foot and stem, aluminium bulb holder and top plate, holding...

Giancarlo Mattioli MT table lamp, designed 1969 produced by Sirrah, Italy 47cm high, 45cm diameter This rare sculptural lamp can be used either as a large table lamp, or a small fl...

Alvar Aalto (Finland 1898-1976) Beehive Pendant Light, model A332 made by Valaistustyö, Finland constructed from six white enamelled metal bands with pierced polished brass mounts to...

Venini, Murano, Italy Original 1940s glass pendant light, the tapering shade in filigrana glass, complete with internal opaque glass shade, brass fittings and tubular brass column 1...

Designed by Angelo Lelii and manufactured by Arredoluce, Italy, this stunning 10-light chandelier comprises adjustable vari-coloured lamp shades on brass arms with ball counterweight...

Gino Sarfatti for Arteluce Moon Lamp pendant ceiling light, model 2130, designed 1969 white lacquer aluminium reflectors with micro bulbs attached to the upper curve, with orange per...

Aarhus City Hall Desk Lamp collaborative design by Arne Jacobsen (1902-1971) and Hans J Wegner (1914-2007) as part of the furniture and fittings for the new city hall that Jacobsen h...

Angelo Lelii "Triennale" floor lamp, model 12128 Chrome plated brass stand with lacquered aluminium shades in black, white and grey. Multi adjustable arms with counterweight handles...

Angelo Ostuni and Renato Forti for Oluce, Italy 1950s Telescopic Floor/Table Lamp, model 201/v2 Formed by Ostuni in 1945, Oluce produced high quality lighting for many years. This l...

Poul Henningsen PH Artichoke Pendant Light, produced by Louis Poulsen large size in copper, 72 leaves The large 'PH Artichoke' copper chandelier by Poul Henningsen for Louis Poulsen...

"Triennale" floor lamp, designed by Angelo Lelii An iconic mid-century classic introduced circa 1950, this example of 50's production by Lelii's own Arredoluce Company based in Monz...

Verner Panton, Danish 'Flowerpot' Pendant Light, model VP2 designed and manufactured late 1960s This is the rare larger version, model VP2, with shade measuring 50cm diameter, 33cm ...

Angelo Lelii for Arredoluce Three-Arm Floor Light, circa 1960 Chrome plated brass stem and arms with lacquered aluminium shades and counterweights Arredoluce label This model appear...

Alvar Aalto (Finnish 1898-1976) Leather Desk Lamp, model A704 made by Valaistustyö, Finland 1950s Designed in 1954, the A704 lamp has a black enamelled metal shade with double-laye...

Angelo Lelii for Arredoluce, Adjustable Wall Light with red lacquered steel mesh shade on a fully articulated tubular brass support with central hinge which allows the shade to be mo...

Very rare large size 'Bidone' adjustable wall light, designed by Luigi Caccia Dominioni and manufactured by Azucena, 1950s Long opaline glass shade suspended from a brass collar, cu...

Rare adjustable table lamp, model no. 12401, designed by Angelo Lelii circa 1952 and manufactured by Arredoluce, Monza, Italy. Marble base, with lacquered and polished brass stem co...

Gino Sarfatti, Wall Sconce, model 211, designed 1955 and manufactured by Arteluce in the 1950s. In black lacquered aluminium with reflector that rotates on its own guard axis, so th...

Gino Sarfatti, Model 205 Wall Light, designed 1955 and manufactured by Arteluce, Italy. This rare model is illustrated in the Sarfatti catalogue raisonée. Constructed from an opali...

A rare pair of twin-light adjustable wall lights, designed in 1955 by Tito Agnoli and manufactured in the 1950s by Oluce. The white opal perspex shades can be turned slightly to adj...

This is a very rare extendable wall light, Model 197, designed in 1953 by Gino Sarfatti and produced by Arteluce. Black lacquered aluminum diffuser on a brass adjustable arm. Max...

This is a rare design, featuring Vigano's distinctive conical shade mounted on an articulated brass arm with circular wall mount. The hinged arm allows the shade to be moved in multi...

Original 1950s vintage wall light or sconce, made by Lumi and likely designed by Oscar Torlasco. Constructed with a white painted metal panel and a yellow painted metal mesh panel w...

Gino Sarfatti for Arteluce, a pair of wall lights, model 225 designed in 1957. Each stationary white lacquered aluminium reflector is supported by a brass rectangular wall mount 35...

Rare early triple wall light by Sarfatti for Arteluce, as shown in a photograph advertising Arteluce's stand at the VII Triennale, Milano in Domus issue #149, 1940 Three white paint...

Viljo Hirvonen (1916-1975) Floor Lamp model H801, in cast iron, leather, brass and lacquered metal, designed circa 1960 and manufactured by Valaistustyö...

Ennio Lucini, Cespuglio Lamp, 1970s for DH Guzzini This beautiful table light was designed in 1970 by Ennio Lucini and manufactured by DH Guzzini. It is constructed from 16 serrated white acrylic fins which slot into a painted aluminium base holding the bulb. The result is a three-dimensional light resembling a piece of coral or anemone. Lucini named the lamp Cespuglio, which translates as Bush in English. It has also been described as "a desk-cloud, a ghost in the jar" (A. Morello in the book...

Filippo Panseca for Arteluce, Articulated Desk Light, 1960s. The design comprises a clear perspex block with articulated aluminium arm and shade. Both the arm and the shade adjust ...

Stunning Pop Art Table Lamp, comprising 16 plexiglass rods illuminated through circular holes in the black aluminium base. Believed to be a model titled Divieto, attributed to Gianf...

Model 606 desk or table lamp, designed by Gino Sarfatti in 1971 and manufactured in Italy by Arteluce. Black crackle lacquered aluminium shade, height adjustable and swivel, support...

Pendant light, model no. 2079, by Gino Sarfatti, design 1955, manufactured by Arteluce, Italy. Micro perforated lacquered aluminium shade over an opaline glass diffuser. Completely...

Tapio Wirkkala K11-16 desk or table light, fully adjustable, designed 1954 and made by Idman, Finland Brass, leather and enamelled steel. The lamp is stamped Idman to the upper lev...

These iconic mid-Century Italian table lamps were manufactured by Arredoluce to a design by Angelo Lelii, circa 1952. Sold as a pair, each lamp is made of aluminium and brass, on a m...

Tito Agnoli, table or desk lamp, model 269 for Oluce, Italy. A nickel finished cylinder supports an upright pillar with serated teeth allowing the green perspex shade to travel up and downby about 3 cm top to bottom. A highly eclectic lamp...

Greta Magnusson Grossman for Bergboms, Malmo, Sweden, 1950's. A "Grasshopper" floor lamp available in black enamel or grey/green. Both lamps have the original label applied to the ou...

Stilnovo, Italy, circa 1955. A floor lamp with marble foot supporting an angled upright stem with large red uplighter on top and a pivoting brass arm terminating in a yellow enamelle...

Giuseppe Ostuni for Oluce, Italy circa 1960. A floor lamp with enamelled metal black base, stem supporting black metal framework with yellow flexi shade. Inside there are 3 vertical ...

Alvar Aalto table / desk light designed 1957 for Valaistustyo, Finland. Enameled steel black base and shade with contrasting white visor. Goose neck arm for shade orientation. Sta...

Gino Sarfatti designed for Arteluce, Italy, 1960s . Pair of gooseneck arm appliques with chromed arms and black enamelled rotating shades. Labels to ins...

Giuseppe Ostuni for Oluce , Italy, 1950s. Formed by Ostuni in 1945, Oluce produced high quality lighting for many years. This table/floor lam...

Late 60's or early 70's an Angelo Lelli for Arredoluce table lamp ,rectangular marble base supports pair of upright chrome tubes which progress into flexible black pipe , lamp head ...

Design Line of California which means the lamp was most likely designed by Bill Curry . Rare tall floor lamp of white ribbed acrylic tube slotted into heav...