Skip to main content
Want more images or videos?
Request additional images or videos from the seller
1 of 9

Mid-Century Modern Red Plywood Lounge LCW Chairs by Eames for Herman Miller

More From This Seller

View All
1940s Pair of Early Charles Eames for Herman Miller LCW Lounge Chairs in Oak
By Charles and Ray Eames, Herman Miller, Evans Products Company
Located in Philadelphia, PA
Designed in the late 1940s by Charles Eames, this chair has cemented itself in Mid-Century Design like very few other pieces. Early models like this are difficult to come by and are very rarely in such good condition, as many have been worked on in some way or another before their value shot up. These chairs feature a super sleek design of steam-bent plywood, an incredibly innovative technique pioneered by Herman Miller in collaboration with the Eames's and manufacturing firm Evans. The large seat and back are mounted to a molded plywood base with rubber shock mounts, another Eames staple. This allows them to have excellent contrast through spacing, which gives them an excellent stance, almost insect-like. Both are early chairs with the correct screw configurations beneath. This pair features all original hardware, finish, and shock mounts. Very few blemishes, and those that exist are minimal, barely visible even in our high-res pictures. At this time, we have two early pairs, as seen in in photos. We also have another single early model, and two extremely rare pre-production chairs with the accompanying molded plywood coffee table...
Category

Vintage 1940s American Mid-Century Modern Lounge Chairs

Materials

Plywood

1940s Pair of Early Charles Eames for Herman Miller Lcw Lounge Chairs in Birch
By Herman Miller, Evans Products Company, Charles and Ray Eames
Located in Philadelphia, PA
Designed in the late 1940s by Charles Eames, this chair has cemented itself in Mid-Century Design like very few other pieces. Early models like this are difficult to come by and are very rarely in such good condition, as many have been worked on in some way or another before their value shot up. These chairs feature a super sleek design of steam-bent plywood, an incredibly innovative technique pioneered by Herman Miller in collaboration with the Eames's and manufacturing firm Evans. The large seat and back are mounted to a molded plywood base with rubber shock mounts, another Eames staple. This allows them to have excellent contrast through spacing, which gives them an excellent stance, almost insect-like. Both are early chairs with the 5-2-5 screw configurations beneath. This pair features all original hardware, finish, and shock mounts. Very few blemishes, and those that exist are minimal, barely visible even in our high-res pictures. At this time, we have two early pairs, as seen in in photos. We also have another single early model, and two extremely rare pre-production chairs with the accompanying molded plywood coffee table...
Category

Vintage 1940s American Mid-Century Modern Lounge Chairs

Materials

Rubber, Wood, Plywood

Set of 4 Mid-Century Modern Dining Chairs by Charles Eames for Herman Miller
By Charles Eames, Herman Miller
Located in Philadelphia, PA
A nice early set of four DCW chairs designed by Charles Eames and produced by Herman Miller in the 1950's. These feature dark stained plywood construction. Nice warm patina and likel...
Category

Vintage 1950s American Mid-Century Modern Dining Room Chairs

Materials

Plywood

Pair of Charles & Ray Eames Herman Miller Black Leather "Soft Pad" Lounge Chairs
By Charles and Ray Eames, Herman Miller
Located in Philadelphia, PA
Designed by Charles and Ray Eames in the late 1950s, this pair of black leather lounge chairs is the pinnacle of the Herman Miller Aluminum Group family of seating. This pair is not ...
Category

2010s American Mid-Century Modern Lounge Chairs

Materials

Aluminum, Steel, Chrome

Mid-Century Charles Eames for Herman Miller Fiberglass Dining Chairs in Orange
By Charles Eames, Herman Miller
Located in Philadelphia, PA
Here we have an iconic design classic from the Mid-Century Modern period. This vintage fiberglass shell chair was designed by Charles Eames and produced by Herman Miller, circa 1972....
Category

Vintage 1970s American Mid-Century Modern Dining Room Chairs

Materials

Steel

Danish Mid Century Modern Stokke Lounge Chair in Rosewood Suede & Aliminum
By Jens Quistgaard
Located in Philadelphia, PA
Uncommon lounge chair designed by Jens Quistgaard for Nissen Langaa in Denmark circa 1960's. Features a rosewood & aluminum frame with original olive suede cushions. All in all in gr...
Category

Vintage 1960s Norwegian Scandinavian Modern Lounge Chairs

Materials

Aluminum

You May Also Like

Eames LCW Plywood Lounge Chairs in Walnut & Herman Miller Blue Fabric, Pair
By Herman Miller, Charles and Ray Eames
Located in Stamford, CT
The celebrated portfolio of Charles and Ray Eames continues to inspire designers to this day. Early in their mission to create furniture for the masses, the Eameses explored innovati...
Category

2010s American Mid-Century Modern Lounge Chairs

Materials

Fabric, Upholstery, Walnut, Plywood

Eames LCM Lounge Chair, Herman Miller, USA, 1950s
By Herman Miller, Charles and Ray Eames
Located in LEWES, GB
An Eames LCM lounge chair, Herman Miller, USA, 1950s. Ash plywood, chrome-plated steel and original rubber feet caps. With manufacturers label. ...
Category

Vintage 1950s North American Mid-Century Modern Lounge Chairs

Materials

Steel

Charles Eames Lounge Chairs for Herman Miller
By Charles Eames, Herman Miller
Located in bari, IT
Set two lounge chairs model EA 108 designer Charles Eames for Herman Miller production 1960s. Charles Eames began very early in life as a designer to the extent that he was employed, as early as age 14, in the workshops of the Laclede Steel Company. He studied architecture at Washington University in St. Louis. He proposed to his professors the study of the work of Frank Lloyd Wright but, at first dissuaded from his intent, was later expelled from the school on the grounds that-we read in the commentary of one of the professors-"his point of view was too modern." A great influence on him was Finnish architect Eero Saarinen, with whom he shared some professional experiences and became friends. In 1938, at the latter's invitation, he moved to Michigan, where he studied architecture at Cranbrook Academy of Art and later taught there, also becoming head of the Industrial Design department. In 1941 he won, with Eero Saarinen, the competition for MoMA in New York concerning "Organic Design in Home Furnishing." Their work showed a new way of conceiving wooden furniture, experimenting with the use of bentwood plywood, as done a few years earlier by Alvar Aalto. In 1941 he was united in second marriage to Ray Kaiser...
Category

Vintage 1980s Mid-Century Modern Chairs

Materials

Aluminum

Early LCW Lounge Chair in Walnut, Charles & Ray Eames Herman Miller 1940s
By Charles Eames, Evans Products Company, Herman Miller, Charles and Ray Eames
Located in Vorst, BE
An early LCW (Lounge Chair Wood) in Walnut veneer. Chair sold by Herman Miller, but produced by Evans Plywood in 1948-1949. The 5-2-5 screw arrangement beneath has only be used by E...
Category

Mid-20th Century American Mid-Century Modern Lounge Chairs

Materials

Walnut, Plywood

C. 1953 Herman Miller Eames LCW Lounge Chair in Calico Ash
By Herman Miller, Charles and Ray Eames
Located in Philadelphia, PA
This is an LCW Lounge Chair, originally designed by Charles and Ray Eames in 1948. It is an early Herman Miller example featuring the 5-2-4 screw pattern, dating it to ca. 1953. The ...
Category

Vintage 1950s American Modern Lounge Chairs

Materials

Steel

Eames Early Rope Edge Lounge Chair for Herman Miller
By Charles and Ray Eames
Located in Cincinnati, OH
A very early 1st generation rope edge rare lounge height fiberglass arm shell chair with the larger rubber shock mounts having metal washers and satin black iron X base. The chair st...
Category

Mid-20th Century American Mid-Century Modern Lounge Chairs

Materials

Iron

Recently Viewed

View All