Herman Miller Tables

Scarce George Nelson for Herman Miller Model 5756 Cocktail Table in walnut and aluminum, circa 1950s. The juxtaposition of the hard lines and right angles of the aluminum base agains...

For your consideration, a Herman Miller Eames Elliptical Table (ETR) with a white laminate top and wire base, often called the "surfboard table...

Dimensions 54.50in H x 48in W x 20in D Desk Height 27in Ottoman 17in H x 22.50in W x 16in D _______________________ Transforming a piece of Mid-Century Modern furniture is like br...

A true one-of-a-kind design! MCM platform slat bench or coffee table by George Nelson for Herman Miller, circa 2000s. The bench is in good condition with some knicks and dings due to...

Charles and Ray Eames for Herman Miller LTR (low table rod) side table originally designed in 1950 in layered plywood with a black laminate top supported by a resistance-welded chrom...

Pedestal extension dining table model 5559B designed by George Nelson for Herman Miller, produced in the USA in the 1960s. Dining or conference table model 5559B, designed by George...

An early "Rudder" table by Isamu Noguchi. In birch and zinc-plated steel. Designed in 1949. With an asymmetrical form—balanced on two hairpin legs and a third, rudder-like fin—the R...

Designed by the legenday Charles and Ray Eames, this dining set was produced in the 1970s by Herman Miller. This set consists of 4 DSX chairs with bright orange shells and metal base...

This is an authentic & iconic table designed by Charles and Ray Eames and was first produced by Merman Miller in 1964. The 6 ft long table having a blond ash top and raised on black ...

Gorgeous dining table featuring cast aluminum Herman Miller contract base paired with Italian calacatta marble top. Both pieces date to the mid 20th century. The underside of the mar...

Square rosewood segmented base table by Charles and Ray Eames for Herman Miller, circa 1970s. Stunning rosewood veneer surface on polished aluminum base. Square 36"x36" top, comfor...

Vintage Eames Herman Miller MCM Aluminum Group 4 Prong Contract Base White Laminate Top Table Handsome vintage Eames for Herman Miller mid-century modern Aluminum Group 4 prong chro...

This rare table was designed by Charles and Ray Eames in the early 1960s for Herman Miller, the producer of all Eames designs at the time. It was not widely produced at the time, and...

Beautiful early dining table with contract base by Charles and Ray Eames for Herman Miller. The table has an aluminum contract base and white formica table top framed with rubber ed...

A post modern take on a classic design. Eames Aluminum group dining or conference table with an 80's take. Stunning cork laminate top with almond edge banding makes this table very d...

A glorious and monumental Mid-Century Modern conference table or dining table designed by Charles and Ray Eames for Herman Miller in rosewood. Segmented aluminium base with a 7’ roun...

Iconic Art Deco, Art Moderne vanity designed by Gilbert Rohde for Herman Miller, circa 1936. The vanity features a bank of three drawers, which supports a floating glass top surface,...

A rare opportunity to buy a stunning Post Modern desk designed in 1981 by Bruce Burdick for Herman Miller. Burdick’s first product for Herman Miller was the 'Burdick Group System', ...

Plywood and off-the-shelf parts quickly became the calling card for the Eameses' honest design ethos. The Eames Desk Unit (EDU) was no different with its plywood top, masonite panels...

Polished aluminum group segmented base table design from the Eames office for Herman Miller . Aluminum H base supports nicely grained oval marble top . Fine condition through out n...

Museum quality early example. Retains rare paper label.

A George Nelson for Herman Miller pedestal dinette table. A fantastic little table with a white laminate table top, a wooden table, and a white aluminum base with x-shaped legs. This...

Important American desk manufactured by Herman Miller, a kidney shaped desk designed by Gilbert Rohde circa 1941 for his Paldao line. This desk pack everything you need. Exotic pal...

1 Herman Miller Eames 42" aluminum group table. Charles Eames was born in St. Louis, Missouri in 1907. Ray Kaiser Eames was born in Sacramento, California ...

Vintage Bruce Burdick executive desk for Herman Miller from the Burdick Group System, a rare Postmodern 1980s modular workstation executed in aluminum, glass, enameled steel, and ena...

Side table with glass top, designed by George Nelson, for Herman Miller. This table has some minor wear, including a small bruise to the bottom fronts of the drawer, as shown. Origi...

Midcentury modern design large dining table or conference office table designed by Charles & Ray Eames and produced by Herman Miller with wooden top and metal and aluminum struct...

A vintage dining or conference table or a desk. Beautiful Knoll top made of American Walnut on a Herman Miller aluminum segmented base. We have 8 available.  

Mid-Century Modern Herman Miller molded plywood bent tube legs coffee table with substantial magazine rack bookcase by Herman Miller.

Modernist Desk George Nelson by Hermann Miller 1950 Laminated wood, aluminum base Rare model.

Charles and Ray Eames Palisades House coffee table, anniversary edition. Rare and collectible; numbered 98/500. In the late 1990s, to commemorate the 50th anniversary of the Eames house in Pacific Palisades, California, a limited edition of 500 Eames anniversary...

A very rare modular walnut coffee table, Model 4651, designed by George Nelson and produced by Herman Miller in 1946.

For your consideration, a Herman Miller Table Round table by Herman Miller Eames Aluminum Group HMA. Circa the 1980s USA. Maker label present. Aluminum and steel four-star base - ta...

This is a classic Mid-century modern planter table designed by George Nelson for Herman Miller. There were several variations of this versatile piece. This example features a warm t...

Action Office desk, model 64 902, designed by George Nelson & Robert Propst for Herman Miller from the 1960s. Base made of chrome-plated aluminum with white plastic protectors. L...

Available for purchase is this beautiful original mid-century table, featuring two butterfly leaves for easy extension. When fully extended, the table measures 82” in width.

Herman Miller Aluminum Group cafe bistro / dining table with oak veneer top on an aluminum base originally designed by Charles and Ray Eames. This table was produced with the oak v...

This amazing segmented table by Charles with 6x Soft Pad chairs is a 1 of a kind opportunity! Fine and very rare Santos Rosewood segmented table by Charles Eames for Vitra, circa 19...

George Nelson expandable gateleg dining table table for Herman Miller, c.1950s, USA. The walnut table features beautiful dovetail joinery, two drop leaves and a center leaf. The tabl...

Chic Herman Miller Everywhere vintage modern table with natural oak wood veneer and rounded square black metal legs by Dan Grabowski. Beautiful condition, keeping in mind that this is vintage and not new so will have signs of use and wear. There are some very minor scuffs on the legs and a small mark, possibly ink, on the edge of tabletop but no other known imperfections that we have found. Please see photos and zoom in for details. We attempt to portray any imperfections. Circa, December 9, 2011. This table will be wonderful EVERYWHERE!! Of course, it will… it’s the Everywhere table by Dan Grabowski for Herman Miller!! This fabulous modern style table is comprised of a round top wearing a natural oak wood veneer and four black metal legs in an unusual almost “squircle” (YES, it’s a real shape!!) or rounded square legs. It is just the right table to use at the office, in your dining area or breakfast nook, or in the game room, and its versatile enough to host many styles of office or dining chairs from traditional to mid-century modern and everywhere in-between. It’s sturdy, functional, and has a classic, timeless design. What’s not to love? Herman Miller started life as Star furniture...

An early and all original "OTW" coffee table designed by Charles and Ray Eames and manufactured by Evans Products in 1946. The table features molded, 5-layer birch plywood constructi...

This 7 foot long coffee table is perfect for your modern four seat sofa, with simple and timeless design. Black laminate top set on layered wood, with a polished chrome base. Designe...

Early Eames Aluminum Group Marble 36" Round Coffee Table. Stone sits on a metal support system that was only used briefly, or possibly pre-production. Table is in very nice shape w...

Produced 2010 and never used for the facility. In pristine condition with a few scuffs to feet and otherwise flawless. 36" wide 29" tall with matching black adjustable feet. Cherry laminate, rubber edge and black painted contract base...

This is a Segmented Conference Dining Table, Model ET151, initially designed by Ray and Charles Eames for Herman Miller in 1964. This piece dates to the 1980s. The table's design is ...

Thus is a Herman Miller Desk designed by George Nelson. It's from Nelson's Action Office Series. It has 2 pull out drawers and a mid drawer. The top is wood and the legs are steel wi...

Gorgeous Herman Miller Eames dining set. Featuring 4 pink model DSR chairs, recoated in pink and atop fresh new Eiffel bases. All chairs signed Herman...

Rare large custom Eames dining table by Herman Miller. Lustrous circular Brazilian rosewood surface atop cast aluminum legs. Incredible color and grain pa...

This early vintage coffee table by Charles and Ray Eames is an important and iconic design. The result of the couple's experiments in molded plywood, the table is visually and physic...

Unusual original dining or desk table by George Nelson for Herman Miller, mid century Dimensions are 72.04" x 40.15" x 28.15" (height) This dining table was designed by George Nels...

George Nelson for Herman Miller Pedestal Table. Aluminum Base with a formica top and maple edge. Classic, useful design! Very clean example!

This is a Noguchi Coffee Table, Model IN-50, initially designed by Isamu Noguchi in 1944. This example hails from the 1950s and was produced by Herman Miller. The design features a t...

Listed for sale is a 2006 production CTW (coffee table wood), designed by Ray and Charles Eames, produced by Herman Miller. This example was specified in white ash and came from an a...

A vintage U-shaped desk designed by Bruce Burdick for Herman Miller. This enormous desk has three separate surface tops: 84"x 44" glass top, a round onyx top, and a dark granite Geig...

This is a Pedestal Occasional Table, model 5655, designed by George Nelson & Associates for Herman Miller in 1956. The piece has a case of Brazilian Rosewood and has a pedestal base of white enameled aluminum. It has one drawer. The base has been professionally restored, and the rosewood case has been freshly refinished. The piece measures 17 inches deep, 24 inches wide...

Rare Palisander Veneer "Custom" order Eames Dining / Conference Table designed by Charles Eames manufactured by Herman Miller.. Originally designed in 1962, Custom made for client b...

Royal House Antiques Royal House Antiques is delighted to offer for sale this super rare and highly collectable, original, Mid Century Modern, Herman Miller conference table with th...

Stunning and quite rare Gilbert Rohde Art Deco rosewood dressing table, pouf and mirror, purchased recently from an amazing estate, folks originally purchased new from Herman Miller ...

71.75 x 41.75 x 27 7/8". Table was designed by Charles and Ray Eames in the early 1960s for Herman Miller, This model produced 1980. Laminate combed oak top. Signed to underside. Fea...

A wonderful Mid-Century Modern Herman Miller round pedestal table having a white laminate top and trim around the outer edge and supported by a bla...