Antique Drill

with five arms. Drilled for (previous) electrification.

19th century Royal Vienna hand painted porcelain portrait drill vase. The body is covered with high

rounded wooden handle, facilitating operation. The drilling mechanism works manually, by pressing the

circulation with the multiple drillings.

in width at the center, and 3.5 mm in width at the ends. The drill hole perforation is 2 mm in

wide at the ends and 4.3 mm in thickness at the center. The drill hole diameter is 2.1 mm. Of the

diameter of the drill holes is 1 mm. (1.) The center bead, a dark red jasper is 2.12 cm in length, 5.5mm

. Diameter of drill hole- 2.5 mm. A black alabaster barrel shaped bead. 2. Length- 9 mm. Width- 4.3 mm

eight tabular carnelian beads and five square flat agate spacer beads with two drill holes. There are

. The bow bead is 1.8 cm in length, 7 mm in height and 5 mm in thickness. The drill hole diameter is 1

center and tapering to 3.6 mm thickness at the edge. The drill hole is 2.5 mm in diameter. The carnelian

length, 5 mm in width and have drill holes 2.3mm in diameter. They shows signs of chemical interaction

twenty-two rock crystal beads, the largest is 2.2 cm in length, 9 mm in width with a drill hole that is 3

in drilling that allowed long holes to be safely drilled. The risk of the bit seizing up and snapping

- painted shade is an amazing statement piece in any room. Pot is not drilled and can be put back to

tabular carnelian bead is 9 mm in diameter and 3.7 mm in thickness. The drill hole diameter is 1.5 mm. The

thickness. The drill hole diameter is 3.3 mm. The barrel-shaped agate bead to the left of the center bead is

is 3.18 cm in length, 9 mm in width at the center, 5 mm wide at the ends and has a drill hole of 1.5

drilled for electricity. This charming and very elegant model is decorative and easily integrated into a

. The drill hole is 3mm in diameter. There is some chipping at the shoulders of the drill hole. Gold

1881 First Prize Hydrant Drill J W Dore". J W Dore died in 1904, aged 47, apparently still active in

cm in length, 1.1 cm in width and 4 mm in thickness. The drill hole diameter is 2 mm. The smaller

beads and pendants were all shaped without the use of metal tools, the holes being drilled with bow

cm in length, 6mm in width at the center, and 4 mm in width at the ends. The drill hole diameter is 1

7.1 mm and the drill hole is 3 mm. The lapis beads are short cylinders with rounded edges 6.8 mm in

. Thickness- 6.1 mm. Drill hole diameter- 3mm. A flat lozenge of slightly grayish clear quartz with a white

With grape orchard decoration, probably used for wine. Multi vibrant colors. Not drilled.

drill hole diameter of 1.5 mm. The width of the gold band is 8 mm; it occupies the middle third of the

top to bottom. It has a thickness of 5.3 mm and the drill hole diameter is 2 mm. There are thin white

the legs are folded back upon themselves. The drill hole is 1.75 mm in diameter. The frog is actually

. Images (of inside and of outside of chrysanthemum base) show hole drilled for lamp-cord.

1.3 cm in thickness. The diameter of the drill hole is 2.3 mm. The top of the bead is domed so that

and natural sea water pearls. The pearls are drilled and wired to the body of the necklace using a

length, 2.2 cm in width and 8 mm in thickness. The width at the ends is 8mm and the diameter of the drill

inserted to correct a chip at the drill hole. Elongated form. 3. Length 7.8 mm, width 9.5 mm, thickness 3.5

. Drilled for wiring.

mm in height and 5 mm – 5.9 mm in width. The drill hole diameter s are 1.2 mm. The round carnelian

One hundred and seventy-one lapis lazuli beads, twenty-three of which are double drilled pendant

length, 6.2 mm in width at the center and 4 mm in width at the ends. The drill hole diameter is 1.5 mm

America. They have been made entirely without the use of metal tools by the use of abrasives, drills and

beads are 1.05 cm in length and 3.5 cm in width. The drill hole diameters are 2 mm. The last two pairs

2.82 cm in height, 1 cm in width at the bottom. The drill hole is 4 mm from the top and is 2.3 mm in

of metal tools by the use of abrasives, drills and string saws. The pendant is 2.9 cm in height and

entirely without the use of metal tools by the use of abrasives, drills and string saws. The pendant is

to the back. The lapis bead at the center is 2.33 cm in length, 4 mm in width and has a drill hole

center bead is 5.2 mm in length, 5 mm in width and 3 mm in thickness. The drill hole is 1 mm – 2 mm in

in good condition, the base drilled for drainage, but can be made watertight if required. English

lozenge shaped bead 1.15 cm in length, 9 mm in width and 3 mm in thickness. The diameter of the drill hole

19th century urn carved with stiff leaves raised on circular foot, drilled and mounted as a table

heads surround the exterior. Well chased all around in various low relief patterns. Not drilled for

Lobed urn carved with stiff leaves raised on circular foot, drilled and mounted as a table lamp.

Thirty-three diamond shaped double-drilled lapis lazuli beads each of which is separated by two

Each lobed urn carved with leaves raised on plinth base drilled and mounted as a table lamp.

A ribbed cylindrical antique Japanese Imari vase, drilled and mounted as a lamp. Bold design in

use of metal tools by the use of abrasives, drills and string saws. The significance of the grubs for

diameter of the drill hole is 2 mm. The carnelian beads are of two shapes: ten of the beads are tapered

, drills and string saws. The four larger carnelian beads are flattened spheres, 10 mm in diameter. They