Antique Fasteners

We offer this Art Nouveau Victorian Steel Office Stapler Paper Fastener Rarity, fantastic patina.

Walnut dining table with wrought iron fasteners. 18th centuey. Dining table with a rectangular and smooth tabletop supported on legs that follow, simplified, the most common example...

Exposed joints and metal fasteners contribute to its utilitarian character, making the sled an interesting decorative accent for a lodge, cabin or rustic interior.

Designed as a full dress set, including bar and link cufflinks, shirt studs, and fasteners Featuring reverse carved colorless rock crystal quartz ranging from 9.0 to 13.0 mm Painted ...

The piece features a shaped wooden handle with oversized brass-tone fasteners and a large steel-form blade displaying the original manufacturer's graphics including "Manufactured By,...

This piece features a versatile Y-drop construction with a central bolt ring fastener. The lower drop section is detachable and equipped with an end ring, allowing the wearer to atta...

The reverse reveals the authentic texture of pressed natural horn and period-correct brass hardware fastened with original antique screws, featuring an extended pin stem and C-clasp ...

The reverse displays period-correct hardware, including a long extended pin stem and an original tube hinge with C-clasp fastener. A highly wearable and elegant piece of English Vic...

Measuring 5.0 cm across by approximately 3.3 cm high, the brooch carries substantial weight and visual impact as a statement lapel piece or scarf fastener. We ship internationally, ...

Long side stretchers connect the legs near the lower section, while diagonal braces reinforce the corners and give the base a distinctive, functional character. Visible fasteners and...

The reverse features period-correct hardware, including an extended pin stem, tube hinge, and an open C-clasp fastener. Victorian hand motifs were powerful symbols of affection, fri...

The bowl is suspended by three twisted cords, accented with decorative knots, and secured with brass fasteners. The piece is finished with a gilded brass eyelet cover (this will be f...

The exceptionally thick top gives the table a substantial, almost butcher-block quality, while the warm oak finish, pronounced grain, knots, old fasteners, and naturally aged surface...

It has a paste adorned link to the top half with a barrel fastener and a beautiful paste fringe drop with a pretty fan style design to the lower half.

It is complete with the original brown leather case with hinged top and buckle fastener, wear commensurate with age. The case also stamped for French and Sons Ltd.

Beneath each crest, substantial brass strips curl outward into open spiral scrolls arranged around a central upright. Rounded fasteners and visible screw heads articulate the assembl...

Its rugged patina and industrial wear testify to decades of service, likely once employed to organize motorcycle parts, fasteners, or shop tools. Founded in 1903 in Milwaukee, Harle...

It is quite a heavy piece and is threaded onto a steel wire for extra strength and it has a brass barrel fastener. A decadent and luxury piece from the Art Deco era, ready to be wor...

It is quite a heavy piece and is threaded onto a steel wire for extra strength and it has a brass spring ring fastener. A decadent and luxury piece from the Art Deco era, ready to b...

The owl retains his original two glass eyes and the original fastener in the form of a heart shaped padlock; the wire is pressed and lifted to release the "lock" and clips back to cl...

Of rectangular form with a hinged lid, the case constructed in pine and reinforced with iron hardware and exposed fasteners throughout. Retains original iron side handles.

Overlaid with oval enamelled bands of Deep Purple & White. Twin prongs fastener . Swivel action back & prongs. Art nouveau period.

The structural frames of the main unit & lattice sliding doors are made of the thick lumbers with traditional joinery without metal fasteners. A warm black color with a slight r...

The upper section contains a dense arrangement of small drawers intended for organizing hardware, machine parts, fasteners, patterns, or mercantile inventory, while the larger lower ...

The frames are constructed from individually worked components and display, irregular hand tooling early square cut, and hand wrought fasteners, aged wooden backboards , and construc...

It has an old C type clasp and pin fastener. A well made brooch with lots of fine detailing.

Designed in a classic Single Albert style, the piece includes a robust curb link chain connected to an original T-bar, a spring-loaded dog clip fastener, and a suspended drop chain t...

The upper, middle, and lower drawers retain removable compartment dividers of varying configurations for organizing small merchandise, hardware, fasteners, or dry goods, while additi...

Their movable handles make them easy to carry, while the small brass details serve as functional fasteners and provide a warm contrast to the aged wood.

The upper display section is framed in oak with beveled glass panels secured by exposed fasteners, opening from the rear via a hinged access door with original latch hardware.

Ojime An ojime (緒締め), lit. is a bead cord fastener used in Japanese inrō (carrying cases). It is typically under an inch in length.

Evidence of an old repair or stabilization, including adhesive and small metal fasteners, is visible beneath the top at one of the brace connections.

Dated to the early 20th century, the necklace is hand-crafted from silver alloy with a wire band, coiled fasteners, and twenty rings decorated with domed beads and filigree.

Reflecting superior 18th-century workmanship, the structure was assembled without the use of metal fasteners. The vertical jambs feature elegant forward-facing curves topped by scrol...

The tabletop is secured to the base in the traditional manner with large, visibly hand-forged iron pins. These robust fasteners are both structural and decorative, clearly expressing...

The reverse displays the authentic, unaltered Victorian structural hallmarks, including an extended pin stem on a traditional T-bar hinge and an open C-clasp fastener.

9ct 375 Gold Fob Water Chain / Choker By John Grinsell and sons Circa 1880s -1910 Length 15 Inches Thickness 4mm Weight 21.26 grams Hallmark Details Stamped on every Link secti...

Turning the piece around reveals an equally authentic vertical plank backboard system secured with early fasteners, showing deep oxidation and structural foot-blocking.

Secured with small exposed fasteners, the metal serves not only a decorative purpose but also protects and reinforces the more vulnerable points of the wooden structure, creating a s...

A Pair of Antique Victorian Etruscan Revival 14K Yellow Gold Drop Earrings, with Hard To Find Original Clips. Clip earring fasteners provide a piercing-free way to wear jewelry.

The rectangular mounting plate with exposed fasteners and the ribbed, arched support arm reinforce its civic, purpose-built design-form following function with just enough ornament t...

The structural frames of the main unit & lattice sliding doors are made of the thick lumbers with traditional joinery without metal fasteners. A warm black color with a slight reddi...

DETAILS: Hallmark: Oval tag CHANEL Made in France The bracelet is in good condition showing minimal wear, fasteners on one end missing Comes with box IMPORTANT INFORMATION: This ite...

Simple single-compartment bucket shape, an integrated self-fabric shoulder strap, and minimalist metal button fasteners. Features a distinct distressed patina, including natural oil...

It has a trombone style clasp and pin fastener. Condition: Good used condition overall, light surface wear commensurate with age, old repair near where the eye meets the bar, soft s...

It has an old C type clasp and pin fastener. This would look great adorning a lapel or as part of a neck mess across a chain.

The structural undercarriage remains rock-solid, featuring its original heavy wood stabilization block, mechanical threaded studs, and historical wire fasteners cleanly intact. Dime...

Has an old c type clasp and pin fastener and hallmarks along with a registered design number.

It has an old C type clasp and pin fastener. Marks and Era: Marked sterling to the reverse, Edwardian era, c1900s Approx measurements: 1.15" width 1.30" height / length Weighs app...

Opening on the front with fasteners and buttons covered in black velvet. size bead trimmings and tassels same. chamois cotton lining chintzed .

A separately cast floral fastener forms the center and simultaneously becomes part of the construction.

This item will be delivered unassembled with fasteners for stable installation. Very good condition.

This item will be delivered unassembled with fasteners for stable installation. Very good condition.

Falbalas pleated in pink rayon on the neckline with a reminder at the bottom of the skirt with a mesh flounce and roses in buttons. Snap fastener on the left side and small belt in m...

The tabletop simply rests on the base without permanent fasteners. As with any freestanding tabletop, concentrated downward force of approximately 10–15 kg (22–33 lbs) applied near ...

Victorian dated 1870s Depicting Virgin Mary French eagle mark present and goldsmiths stamp on the bail Hung on lightweight Faux amber beads ( Bakerlite ) Weight of pendant is 0.8 g...

The structural frames of the main unit & Sliding doors are made of the thick lumbers of Japanese Red Pine, made with traditional joinery without metal fasteners. While the other ...

Featuring a typical Victorian 9ct Gold hidden fastener. Origin Scotland, United Kingdom. Measurements are provided in inches (‘’) Recommended Size; One Size Length; 24.7’’ Conditi...

The structural parts are made of the thick lumbers, originally made with traditional wood joinery without metal fastener. The drawers open and close smoothly, The inside of the drawe...

The structural parts are made from thick Sugi cedar lumber with traditional wood joinery and no metal fasteners. The drawers open and close smoothly. It is still durable and stable ...