Antique Metal Sheets

When the model is ready, it is glued down onto the mould jig and a sheet metal dam is wrapped around it. Then the mould formula is mixed and the investment material is poured over th...

Brass fittings were an inexpensive alternative, but because they were made from drawn, embossed or stamped sheet metal, they were limited to flat shapes and had little sculptural dep...

Master craftsmen employed a combination of traditional techniques including repoussé, chasing, and hand-raising to transform these precious sheets of metal into objects of both utili...

Using this method, Boulsover was able to make sheets of metal which had a thin layer of silver on the top surface and a thick layer of copper underneath.

Condition • Structurally solid and stable • Aged surface with loss of paint • Natural split wooden areas as shown • Loss to the ear and front of nose area • This item does not stand...

Once driven by a mechanical movement, now long gone, our specialist has sympathetically upgraded it with a discreet quartz battery movement — allowing it to keep perfect time while r...

This rare survivor, a novelty Hunter and Palmer biscuit tin made from pressed sheet metal and transferred printed to accurately look like a genuine 19th century Indian hardwood box.

Stencil Cutting: Skilled artisans cut separate stencils—one for each color or tone—often using thin sheets of metal, plastic, or oiled paper. Color Application: Using brushes or dau...

Stencil Cutting: Skilled artisans cut separate stencils—one for each color or tone—often using thin sheets of metal, plastic, or oiled paper. Color Application: Using brushes or dau...

Secure screw-back closures ensure comfortable, reliable wear—ideal for the woman who loves timeless style with a modern, geometric twist. Technical Sheet: Metal: 18K White Gold (75...

Perfectly balancing vintage character and modern wearability, this ring makes a timeless statement on any hand. Technical Sheet: Metal: 18K Yellow Gold (750‰), French “Head of Eagl...

Using this method, Boulsover was able to make sheets of metal which had a thin layer of silver on the top surface and a thick layer of copper underneath.

Notably, part of the tabletop has been reinforced with a sheet of galvanized metal, a repair that reflects both the aesthetic sense and practical ingenuity of its past owners or craf...

Heavily constructed and weighing significantly more than typical sheet-metal examples, this piece was designed for both function and ornament, reflecting the high level of craftsmans...

Composed of two solid brass coat hooks attached to a base plate made up from brass sheet metal, put under pressure and formed around an iron base.

Unlike sterling, which is hammered or rolled from an ingot of silver blended with other metal alloys, Sheffield plate consists of a sheet of silver, about 1/8-inch thick, fused on to...

Unlike sterling, which is hammered or rolled from an ingot of silver blended with other metal alloys, Sheffield plate consists of a sheet of silver, about 1/8 inch thick, fused on to...

It has double-sided drawers and pull-out shelves and a removable sheet metal storage tray. This Cubist serving table is ideal for those looking for furniture with history and style.

Its slender gold shank and low profile ensure both comfort and style, making this a standout piece for both everyday refinement and special occasions. Technical Sheet: Metal: 18K Y...

Walter Von Nessen Studio, Art Deco copper bowl c. 1927, USA, hammered copper sheet metal, the exterior and interior bowl decorated with Nordic style geometric bands and fish in dark...

Starting in 1770, a second layer of silver was added, creating a true "sandwich" of three metal layers. The resulting sheet displayed silver on both sides, making it ideal for object...

G H Williamson and Sons were sheet metal works in Providence Street, Worcester and were in operation from the late 19th century until circa 1930.

This is an early 20th century beakhorn stump anvil from a blacksmith or tinsmiths sheet metal workshop. Stump is 19 inches high by 13 inches diameter.

Sheffield plate consists of a sheet of silver fused on top of an ingot of copper, which is then flattened to a malleable sheet of metal; in this state, the two metals act as one, exp...

The feet are hand made in wire and sheet metal and the legs have been bound with thin twine and realistically painted.

Louis XVI style lamps two lights in bronze called bouyotte lamps with its lampshade in painted sheet metal ,bordeaux color. The lampshade can be adjusted to the desired height the b...

The included black and gold sheet metal plate is very nice and with a counter heart. maximum dimensions cm w 136 x H 100 x D 40, internal mouth cm w 98 x H 74.

African Senufo Bird Carved Wood Sculpture, set as a Tall Lamp This wonderful antique carving has been set on a circular plinth which supports a lamp lighting it from above This is a...

Hungarian born 1910 -2001, then turned nationality French designer circa 1950s, pioneered perforated sheet metal, collection Musee des Arts decoratifs, Paris.

Items with a homogeneous appearance could easily be made in large numbers, especially sheet metal which could be worked very rapidly.

Pair of Arita porcelain lamp called Imari on gilt bronze frame decorated with flowers in polychrome sheet metal from the 19th century. Imari porcelain is a style of Japanese ceramics...

Unusual and elegant wrought iron table retaining some original orange and green paint. Cloverleaf-patterned sheet metal top.

Antique painted zinc architectural element with stylized 'fleurs de lis' - terra cotta color - folded sheet metal construction with applied/welded decoration - unsigned - Canada (pos...

Using this method, Boulsover was able to make sheets of metal which had a thin layer of silver on the top surface and a thick layer of copper underneath.

19th century, England, a lovely quality and highly decorative Victorian coal scuttle made in brass sheet metal with an interior metal lining. The exterior is decorated in relief with...

To ensure the supply of raw materials in 1888 Scheid opened up his own refinery where, from precious metal wastes, raw material as well as semi-manufactured products, as sheet metals...

Using this method, Boulsover was able to make sheets of metal which had a thin layer of silver on the top surface and a thick layer of copper underneath.

It consists of shaping sheets of metal such as copper , brass , silver or even tin using different tools, mainly hammers.

The pendants are constructed of copper sheet metal and the inner reflective sections from a Holophane mercury reflective glass.

The coat rack consists of solid brass, brass sheet metal, handmade brass screws and maple tree.

Using dinanderie, the artist hand-hammers thin sheets of alternating metals to produce subtle gradations of color.

This basket is made of silver embossed sheet metal. Weight of the silver alone: 194 grams.

One of these, showing new effects produced in a model theatre, was the wonder of the day, with its use of lights behind canvas representing the moon and stars, and the illusory appea...

., England, a hammered and repousse decorated copper sheet metal over wood box, the hinged slated lid decorated with in Arts & Crafts style.

"Woman with a Square Umbrella" is an early example of Calder's wood carvings and particularly rare since Calder abandoned the medium in the 1930's in favor of sheet metal. Calder or...

To ensure the supply of raw materials in 1888 Scheid opened up his own refinery where, from precious metal wastes, raw material as well as semi-manufactured products, sheet metals an...

The sconce was made out of brass, opaline glass, iron and sheet metal (aluminum). At the front side the flush mount has a lockable window to change the bulbs easily.

Designed as an Industrial answer, the can has been made of split steel wire that was formed in a press from sheet metal split and wrapped into a crimped top and bottom ring set with ...

It is therefore ideally suited to the formation of elaborate objects made of hammered sheet metal. Its relatively low melting point was a big advantage to early metal workers.

The open top is divided into four compartments, the largest lined with sheet metal for use as a small hibachi (hi-ire).

This system is generally found on sheet metal lamps from the Restoration or Empire period, much more rarely on porcelain vases.

The process is relatively slow, but a maximum of form is achieved, with one continuous surface of sheet metal of essentially the same thickness. Direct contact of the tools used is u...

Circa 1933-1940; United States Streamline Moderne Machine Age era industrial minimalist styling, having a monel top folded around wooden frame, above black enameled sheet metal bod...

Cannetille work was a favored style in the 1820s and 1830s where wirework and thin sheets of metals were fashioned into scrolls, tendrils or coil shapes.

With a delightful folk-art appeal, likely to have been constructed by a fairground showman using hand carved wooden sections and metal support rivetted sheets. The layers of paint ar...

To ensure the supply of raw materials in 1888 Scheid opened up his own refinery where, from precious metal wastes, raw material as well as semi-manufactured products, as sheet metals...