Brass Cladding

The Floral Credenza 80" in Smooth Brass has carved floral vines across its full front face, drawn from the botanical motifs of Rajasthan's miniature painting tradition and pressed in...

The Louise Credenza in Smooth Brass has six cabriole legs, a serpentine front, and four cupboard doors flanking three central drawers with curved metal pulls, all clad in Smooth Bras...

The Floral Credenza 60" in Smooth Brass has carved floral vines across its full front face, drawn from the botanical motifs of Rajasthan's miniature painting tradition and pressed in...

Back panel, seat, arm rests, apron, and four cabriole legs are all clad in Smooth Brass, each surface pattern-cut and hand-fitted in sequence.

The Louise Credenza in Smooth Brass is the storage form of the Louise series: six cabriole legs, a serpentine front, four cupboard doors on the outer sections, and three central draw...

The flat back edge sits against the wall, fully clad in Smooth Brass like every other surface. The serpentine apron follows the curved front between the three legs.

A stitched black leather sleeve clads the substantial brass barrel of this heavy single draw marine telescope.

A leather-clad, brass-lidded humidor, designed by Carl Aubock II during the 1950s.

All surfaces are fully clad in Smooth Brass, including the flat back. The two outer legs are set at the rear corners; the third is centred at the front under the apex of the curve.

The Fleur de Lis Credenza was designed by Paul Mathieu for Stephanie Odegard Collection as the credenza form of the Louise carved series. In Smooth Brass, the Fleur de Lis pattern co...

Its sculptural faux mother-of-pearl Lucite structure folds into two wing-like shapes, much like origami, creating the handles, which are covered with brass sheet. The other two sides...

The back, seat, arms, apron, and four cabriole legs are clad in Smooth Brass, the metal fitted by hand to each curved surface.

All surfaces, including the flat back, are fully clad in Smooth Brass metal. The serpentine apron follows the curve between the three legs.

The Louise Card Table in Smooth Brass is 32 inches square, the four cabriole legs carved from solid teak and clad in Smooth Brass metal from foot to apron, the serpentine apron curvi...

Back, seat, arms, apron, and four cabriole legs are all clad in Smooth Brass, fitted by hand with flush-set nails marking the seam lines across the full exterior.

The Louise Long Credenza in Smooth Brass is 120 inches wide, clad entirely in Smooth Brass metal, with six cabriole legs across its full length.

A metal-clad mirror frame, individually is clad in hand-applied Brass over a wood substrate with a clean, architectural profile.

A metal-clad mirror frame is clad in hand-applied Brass over a wood substrate with a clean, architectural profile — The piece frames the mirror in a smooth metal-clad border with ref...

A Smooth Brass metal-clad chaise serving as day bed is clad in hand-applied Smooth Brass over a carved wood frame in the Louise style.

A Smooth Brass metal-clad chaise is clad in hand-applied Smooth Brass over a carved wood frame in the Louise style.

A Smooth Brass metal-clad chaise conceived as a accent lounge is clad in hand-applied Smooth Brass over a carved wood frame in the Louise style.

The Louise Fleur de Lis Dresser in Medium Hammered Brass has nine drawers across 84 inches of carved surface, the Fleur de Lis pattern pressed into solid teak before the Medium Hamme...

Fascinating mid-century modern dining table featuring two massive pedestals clad in patinated brass having quatrefoil or clover forms.

A full-height armoire hand-clad in Brass over a wood framework, the exterior organized as a coffered panel grid.

Cabriole legs are clad in Medium Hammered Brass on the full S-curve.

The Louise Card Table in Smooth Brass has four hand-carved cabriole legs, a serpentine apron, and a 32-inch square top, all clad in Smooth Brass metal.

The Floral Credenza 60" in Fine Hammered Brass has carved floral vines across its full front face, drawn from the botanical motifs of Rajasthan's miniature painting tradition and pre...

The Floral Credenza 80" in Medium Hammered Brass has carved floral vines across its full front face, drawn from the botanical motifs of Rajasthan's miniature painting tradition and p...

The Floral Credenza 80" in Fine Hammered Brass has carved floral vines across its full front face, drawn from the botanical motifs of Rajasthan's miniature painting tradition and pre...

The Floral Credenza 60" in Medium Hammered Brass has carved floral vines across its full front face, drawn from the botanical motifs of Rajasthan's miniature painting tradition and p...

The drawer fronts carry curved half-moon pulls formed from the Smooth Brass metal cladding. Interior: teak veneer with adjustable shelving behind four cupboard doors.

The cabriole legs are carved from solid teak and clad in Smooth Brass metal following the compound S-curve.

A metal-clad armoire is clad in hand-applied Brass over a wood substrate with embossed floral relief panels.

An exceptional Mid-Century handcrafted jewelry box from Taxco, Mexico, featuring a substantial brass case clad in meticulously hand-cut abalone shell mosaic.

Back panel, seat, arm rests, apron, and four cabriole legs are all clad in Smooth Brass, fitted by hand to each curved and flat surface in sequence.

A metal-clad armoire designed as a wardrobe is clad in hand-applied Brass over a wood substrate with embossed floral relief panels.

Side panels, doors and legs clad in burnished brass. Top and inside in walnut Colore.

The repeating heraldic lily pattern is carved into solid teak before the Smooth Brass metal cladding is fitted over it, the metal pressed into the carved forms to preserve the relief.

The raised decoration stands out against a finely textured background, while small circular rosettes form a decorative border around the lid. The wooden body is clad in worked brass...

All surfaces are clad in Smooth Brass including the flat back. The centre cabriole leg sits below the apex of the curve; the two outer legs are at the rear corners.

All surfaces clad in Smooth Brass. At 31 inches wide and 15.5 inches deep, the proportions suit a narrow entry hall or corridor.

The flat back edge is fully clad in Smooth Brass metal like every other surface.

Every surface is clad in Smooth Brass. At 31 inches wide and 30 inches tall, the proportions are those of a practical entry console.

The cabriole legs are carved from solid teak and clad in Smooth Brass metal. Interior: teak veneer with adjustable shelves.

This sculptural vessel features a dramatic tapered form crafted in solid brass and fully clad in a mosaic of iridescent abalone shell inlay, creating a luminous surface of shifting b...

Dimensions Width: 180 cm (70.9 in) Depth: 45 cm (17.7 in) Height: 75 cm (29.5 in) Materials Hand-cut glass cladding Polished brass inlays Solid wood structure Polished brass...

The polished brass structure outlines the glass-clad bodies and gives the pair a clear architectural profile.

These are complemented by recessed brass handles on the drawer fronts, which are designed to sit flush with the surface, contributing to the minimalist aesthetic and preserving the v...

A metal-clad mirror frame conceived as a accent mirror is clad in hand-applied Brass over a wood substrate with a clean, architectural profile.

The Louise Long Credenza spans 120 inches, ten feet of continuous Smooth Brass metal cladding across a serpentine front, curved sides, and a long flat top.

The Monolithic Sideboard is made of a walnut wood structure and is cladded in patinated brass sheet folded and facetted around the corners.

A celebration of narrative design and luxury craftsmanship, this sculptural lounge chair evokes the rich textures and vibrant fauna of Southern Africa. The curved shell is clad in s...

The form is three surfaces: a flat top and two vertical sides that reach the floor. The Medium Hammered Brass metal cladding covers all three without interruption, the hammered textu...

Every surface, including the flat back edge, is clad in Smooth Brass metal. The teak structure is built to the half-moon form before Smooth Brass metal sheets are pattern-cut and fi...

Gloss black lacquered wood bed mounted to a 4 inch plinth base clad in polished brass. Shaped headboard, footboard and side rails with four shaped tapering columns.

A sculptural seven-piece Mexican modernist barware set executed in solid brass and clad in hand-cut abalone shell mosaic, crafted in Mexico circa 1960s.

Ninety-six inches of Medium Hammered Brass metal cladding across a hourglass profile, the sides arcing inward at the waist and flaring at each end, the lid opening to a teak-lined in...

Composed of vertically ribbed travertine panels, the base curves with quiet rhythm, ending in a recessed plinth clad in brass, a thoughtful elevation that lightens its visual weight.

The available options for metal cladding are brass, white bronze, antiqued bronze, silver and copper.

The available options for metal cladding are brass, white bronze, antiqued bronze, silver and copper.