Eames Plywood

obviously inspired by the famous Charles and Ray Eames plywood chair, this is documented in the fact that

Elephant in plywood for the very first time. The Eames Elephant is also available in plastic, ideal for

Molded plywood chair designed by Charles and Ray Eames, c.1945-50. Unusual, grainy veneer

. This Limited Edition Plywood Eames Elephant is a highly sought-after collectible, as only 1000 in both

Charles and Ray Eames 'S2-1790' leg splint, molded plywood Molded Plywood Division, Evans

Mid century leg splint created by Charles and Ray Eames for Evans Products Company, 1943. This

Iconic molded plywood side desk/dining chair designed by Charles & Ray Eames for Herman Miller, c

Charles and Ray Eames spent many years experimenting with new techniques for producing three

While their cousin, the DCM, sits upright, Eames molded plywood lounge chairs with metal bases (LCM

Charles and Ray Eames storage unit featuring five drawers in the middle area. Side and back panels

A very good example of an original Evans Eames DCM molded plywood dining chair finished in Calico

Charles Eames for Evans Products Rare Set of Six Dept of the Navy Issue unopened molded plywood leg

Charles and Ray Eames molded plywood leg splint circa 1942 manufactured by Evans Products, molded

Charles and Ray Eames storage unit featuring an open area in the upper section and two sliding

Rare design by Eames it is in great vintage condition minor wear from age and use all original.

LCW Chair, plywood in ash, original fabric, Charles & Ray Eames, USA, 1948. Early example of a

Charles and Ray Eames for Herman Miller, US LCW lounge chair in bent plywood. Measures: Height

The Eames DTM-2 (Dining Table Metal) table is a classic example of mid-century modern design

One-piece of the numbered edition of 500 rosewood screens by Charles Eames. No. 190 of 500.

Rare Hoffmann Radio by Charles and Ray Eames, designed 1946. The production was made by Hoffman

Rare Eames IT table produced by Herman Miller. Birch top. Intact label.

Rare Eames IT table produced by Herman Miller. Birch top. Intact label.

An early example of the walnut plywood Eames DCM chair in a set of four. Produced in 1955 by the

Richard Hersberger Pace Collection chair and ottoman. Crafted in plywood much like the Eames chair only

An early design by Charles and Ray Eames. Produced by Evans Products.   

An early 1950's Eames for Herman Miller molded plywood chair (Dining Chair Wood) with crisp incised

The Eames LCM (Lounge Chair Metal) is a celebrated example of mid-century modern design by Charles

created by Ray Eames. The Classic Trays, which are made of laminated plywood, come in assorted motifs

created by Ray Eames. The Classic Trays, which are made of laminated plywood, come in assorted motifs

Side table by Charles Eames for Herman Miller. This model was designed in the 50s for the American

Designed by the iconic Charles and Ray Eames; a pair of plywood LCW lounge chairs stained in black

1948 DCM Eames chair turned into sculptural design by artist Markus Friedrich Staab. Backrest

Own a piece of design history with this rare set of 1st generation pre production Eames DCW chairs

This original vintage Charles and Ray Eames for Herman Miller DCW dining chair is expertly crafted

textile designer Alexander Girard. Charles und Ray Eames' most important designs: Plywood Group, Plastic

A true original, the eames molded plywood dining chairs have earned recognition both as Time

Charles Eames-helmed Evans Molded Plywood Products Division. Clad in combed oak veneer with original semi

Children’s School Chair in middle-childhood. This is a classic design by Karl Nothelfer from 1967, produced by Casala (Germany). CaSaLa was founded in 1917 by CArl SAsse in LAuenau G...

familiar Western shape and combines it with a technique employed by Charles and Ray Eames which involves

Inspired by Eames molded plywood chair. This unique crab chair uses laminated bleach ashwood from

Aalto's laminated bent-plywood furniture and Charles Eames' moulded plywood designs, she began to develop

Rare Eames Childs Chair from 1945 and made by Evans Products ,this example in red aniline-dyed

Rare folding screen designed by Charles and Ray Eames and produced by Herman Miller. This folding

Desk height Chair. This early example is marked on the bottom – Evans Plywood. This item is

1946 (and later by Herman Miller and Vitra). The chair consists of bent plywood in organic shapes, it

Early 1950s Charles and Ray Eames molded plywood lounge chair in ash. This is one of their early

Stunning vintage plywood divider by Charles and Ray Eames, for Herman Miller. Model “FSW-6

Charles and Ray Eames plywood elephant designed in 1945 and produced currently by Vitra. This is

piece to the Eames plywood dining chairs, a rectangular, walnut-veneered top is supported by right-angle

visited the United States and learned the Charles & Ray Eames plywood techniques at the Herman Miller

Charles Eames Plywood Chairs For Vitra; 1999; Late 20th Century; Germany; America; Metal, Plywood

inspired by Charles & Ray Eames plywood designs. Measurements table: Height 74 cm Diameter 104.5 cm

Plywood Group Lounge Chair by Charles & Ray Eames for Vitra, designed in the 1945/1946s. Stainless

First generation, circa 1950 Charles and Ray Eames. Museum quality, sea foam green arm shell lounge chair made by Zenith Plastic Co./ Herman Miller. Features amazing exposed fibers, ...

Charles Eames for Herman Miller Zebrawood DCM chairs, rare set. Zebrawood was used from 1954-1959. Very nice original condition, minor scuffs to seat. Labels.

A pair of very well grained early bent walnut plywood side chairs designed by the iconic team of Ray and Charles Eames . These sculptural chairs are part of furniture history beginni...

A set of 6 Eames DCM Chairs Walnut seats and backs Good Grain pattern 1970s production

This is a pair of LCW Lounge Chairs, originally designed by Ray and Charles Eames in 1948. They are early Herman Miller examples and feature the 5-2-4 screw pattern, dating back to t...

An early, Mid-Century Modern oak 'DCW' dining chair designed by Charles Eames with a double shock-mount to the backrest. Manufactured by Herman Miller in the USA, circa 1950s.

This is an LCW Lounge Chair, originally designed by Charles and Ray Eames in 1948. It is an early Herman Miller example featuring the 5-2-4 screw pattern, dating it to ca. 1953. The ...

Very nice early production Charles and Ray Eames designed dining chair metal (DCM ). Clean chrome frame supports ash grain seat and back. Retains original Eames Evans Herman Miller w...

This is an early DCM Chair, originally designed by Charles and Ray Eames in 1946. The piece was produced by Herman Miller and retains its tag under the seat. This example was produce...