French Copper

The Louise Demi Semainier in Smooth Copper has three drawers, four cabriole legs, and a carved floral surface that covers the full front, sides, and top. The Smooth Copper metal clad...

The Louise Floral Credenza in Medium Hammered Copper has cabriole legs and serpentine front from the Louise series and the dense botanical carving from the Floral series, all in Medi...

The Fleur de Lis Credenza in Smooth Copper is 78 inches wide on six cabriole legs, the Fleur de Lis carving covering every exterior surface in Smooth Copper metal, four cupboard door...

The Louise Dining Table in Smooth Copper is 72 inches wide on four cabriole legs, the serpentine apron curved between them, the top covered in Smooth Copper metal with the geometric ...

The Vaisseau Storage Bench sits at 17 inches, which is seat height, and 36 inches wide, which is bench width, and in Smooth Copper metal with an hourglass profile that makes it somet...

A charming 18th century Tortiere from the Southwest of France. This handsome piece is crafted from heavy gauge copper raised on feet with its lid.

The copper bronze finish adds to the elegance of the lantern.

The Smooth Copper metal cladding is pressed into the carved relief to keep the pattern visible through the metal.

The Smooth Copper metal cladding is fitted over the carved relief so the floral pattern reads through the metal.

Pair French Antique Copper Cauldrons An attractive pair of Copper Cauldrons featuring forged steel handles with copper hinges riveted through.

The Louise Demi Semainier in Smooth Copper is a three-drawer chest on cabriole legs with a carved floral surface that covers every exterior face in Smooth Copper metal.

The Louise Floral Credenza in Medium Hammered Copper has six cabriole legs, a serpentine front, four cupboard doors, and three central drawers, all covered in a dense botanical relie...

The Louise Round Table in Smooth Copper is 30 inches in diameter, 30 inches tall, four cabriole legs in Smooth Copper metal carrying a circular top in the same Smooth Copper surface,...

The Louise Round Table in Smooth Copper is a 30-inch round side table on four cabriole legs, each in Smooth Copper metal, with a serpentine apron and a circular top covered in the sa...

The Louise Club Chair in Smooth Copper covers the full armchair form in metal: back, seat, arms, apron, and four cabriole legs, all in Smooth Copper, fitted by hand. The arms are inc...

The Louise Floral Credenza in Medium Hammered Copper has the cabriole legs and serpentine front of the Louise series and the dense floral relief covering every exterior surface in Me...

The Louise Round Table in Smooth Copper is 30 inches in diameter and 30 inches tall, four cabriole legs in Smooth Copper metal carrying a circular top in the same surface. The serpen...

The Louise Credenza in Smooth Copper has six cabriole legs, a serpentine front, and four cupboard doors flanking three central drawers with curved metal pulls, all clad in Smooth Cop...

The Louise Floral Credenza in Medium Hammered Copper is 80 inches of carved botanical surface on cabriole legs, the floral relief covering the front, sides, and top continuously, the...

The Long Vaisseau Bench was designed by Paul Mathieu from the tradition of metal-clad furniture he encountered in India. In Medium Hammered Copper, it spans 96 inches with the hourgl...

The Louise Demi Semainier in Smooth Copper is a carved chest of drawers on cabriole legs with a serpentine front. The floral relief covers the front, sides, and top; the Smooth Coppe...

The Fleur de Lis Credenza in Smooth Copper is the Louise credenza form covered in the Fleur de Lis carving: six cabriole legs carrying a serpentine front in Smooth Copper metal, four...

The Louise Dining Table in Smooth Copper has four cabriole legs in Smooth Copper metal, a 72-inch top in the same Smooth Copper surface, and a serpentine apron that curves between th...

The Fleur de Lis Credenza in Smooth Copper is a Louis XV credenza form covered in a carved heraldic surface: six cabriole legs, a serpentine front in Smooth Copper metal, four cupboa...

The Fleur de Lis Credenza in Smooth Copper is 78 inches wide and 34 inches tall, the Fleur de Lis carving covering the full front, sides, and top in Smooth Copper metal. The repeatin...

The Vaisseau Bench in Fine Hammered Copper is a storage piece in the collectible category: a form that comes from a specific cultural tradition, interpreted by a named designer, prod...

The Louise Floral Credenza in Medium Hammered Copper is 80 inches of carved floral surface on cabriole legs. The dense botanical relief, drawn from the floral motifs of the palaces o...

The Louise Club Chair in Smooth Copper covers the armchair form entirely in metal. Back panel, seat, arm rests, apron, and four cabriole legs are all clad in Smooth Copper, each surf...

The Louise Credenza in Smooth Copper is the storage form of the Louise series: six cabriole legs, a serpentine front, four cupboard doors on the outer sections, and three central dra...

The Long Vaisseau Bench in Medium Hammered Copper is one of the collection's most complex pieces to produce: 96 inches of compound curved sides, each surface hand-fitted in Medium Ha...

The Louise Dining Table in Smooth Copper has four cabriole legs in Smooth Copper metal carrying a 72-inch top at 30 inches of dining height. The serpentine apron curves between the l...

The Louise Dining Table in Smooth Copper is 72 inches wide on four cabriole legs, with a serpentine apron and a top that carries the geometric panel lines of hand-applied metal sheet...

The Louise Dining Table in Smooth Copper is 72 inches wide on four cabriole legs in Smooth Copper metal, with a 36-inch-deep top covered in the same surface. The serpentine apron cur...

The Vaisseau Bench holds blankets, linens, or anything else that needs storing, and it does so in Smooth Copper metal with an hourglass profile that gives the piece the quality of a ...

The Vaisseau Bench is a storage form with a silhouette that belongs to furniture history. The sides curve inward at the waist and flare outward at the top and base, a profile derived...

The Vaisseau Bench is a storage form that Paul Mathieu designed after encountering the tradition of metal-clad furniture in India. In Fine Hammered Copper, the exterior is entirely c...

As an ottoman, the Vaisseau Bench offers a seat, a footrest, and a storage interior. In Smooth Copper, it offers considerably more: a hourglass profile clad entirely in metal, the si...

Like the aging of silver, copper, or brass, the final result and colour uniformity cannot be guaranteed.

The Vaisseau Bench is a storage piece with a form that earns its place in a room beyond its function. The profile curves inward at the waist and flares at the top and base, an hourgl...

The Louise Round Table in Fine Hammered Copper is 30 inches in diameter on four cabriole legs in Fine Hammered Copper metal, the circular top covered in the same Fine Hammered Copper...

The Louise Floral Credenza in Medium Hammered Copper is a collaboration between Paul Mathieu and Stephanie Odegard. Paul Mathieu designed the Louise form with its cabriole legs and s...

The Louise Demi Semainier in Fine Hammered Copper has three drawers, four cabriole legs, and a carved floral surface that covers the full front, sides, and top. The Fine Hammered Cop...

The Louise Round Table in Smooth Copper was designed by Paul Mathieu as part of the Louise series. The table is 30 inches in diameter, 30 inches tall, four cabriole legs in Smooth Co...

The Louise Credenza in Smooth Copper has six cabriole legs, a serpentine front, four cupboard doors on the outer sections, and three central drawers with curved half-moon pulls forme...

The Louise Credenza in Smooth Copper is 78 inches of serpentine front on six cabriole legs, with four cupboard doors and three drawers with curved Smooth Copper metal pulls. The cabr...

The Louise Credenza in Smooth Copper has six cabriole legs, a serpentine front, four cupboard doors, and three drawers with curved metal pulls, all in Smooth Copper metal from the fl...

The Louise Long Credenza in Smooth Copper runs 120 inches: ten feet of serpentine front, four cupboard doors, three drawers with curved metal pulls, and six cabriole legs carrying th...

The Louise Dining Table in Smooth Copper was designed by Paul Mathieu as the dining-scale expression of the Louise series. Four cabriole legs, hand-carved from solid teak and clad in...

The Louise Demi Semainier is a three-drawer chest on cabriole legs with a carved floral surface covering the full front, sides, and top in Smooth Copper metal. The Fleur de Lis-style...

The Louise Dining Table in Smooth Copper has four cabriole legs hand-carved from solid teak and encased in Smooth Copper metal, a serpentine apron curving between them, and a 72-inch...

The Louise Round Table in Smooth Copper has four cabriole legs, a serpentine apron, and a circular top, all in Smooth Copper metal. At 30 inches in diameter and 30 inches tall, it wo...

The Vaisseau Storage Bench sits at 17 inches, which is seat height, and 36 inches wide, which is bench width, and in Fine Hammered Copper metal with an hourglass profile that makes i...

The Fleur de Lis Credenza was designed by Paul Mathieu for Stephanie Odegard Collection as the credenza form of the Louise carved series. In Smooth Copper, the Fleur de Lis pattern c...

The Louise Dining Table in Smooth Copper has four cabriole legs in Smooth Copper metal carrying a 72-inch top covered in the same surface, the serpentine apron curving between the le...

France / 1920 / crucifix / oak, copper / Religious / Antiques A dignified and beautifully crafted example of early 20th‑century French devotional art, this 1920 crucifix combines so...

The teak structure is built to the half-moon form before Smooth Copper metal sheets are hand-fitted to every surface.

The Long Vaisseau Bench is 96 inches of Medium Hammered Copper metal with an arching hourglass profile: the sides curve inward at the waist and flare at the top and base. The lid ope...

The Louise Demi Console Table in Smooth Copper has a half-moon top, 31 inches wide and 15.5 inches deep, on three cabriole legs.

The Louise Card Table in Smooth Copper is 32 inches square, the four cabriole legs carved from solid teak and clad in Smooth Copper metal from foot to apron, the serpentine apron cur...

The Louise Credenza in Smooth Copper has six cabriole legs, a serpentine front, and a layout that puts four cupboard sections around three central drawers, all in Smooth Copper metal...