Used Scrap Metal

Lucien Smith Scrap metal 4274, 2013 Steel propane canister 45.7 x 30.5 x 30.5 cm 18 x 12 x 12 inches Smith creates work that traverses a spectrum of styles and concerns, from chance...

Lucien Smith Scrap Metal 4409, 2013 Steel oil drum 88.2 x 60.9 x 60.9 cm 34.75 x 24 x 24 inches Smith creates work that traverses a spectrum of styles and concerns, from chance to ...

This figure, seated and engrossed in a book, is composed of welded scrap metal with a nut for a head, slender rod limbs, and a hat resembling a top hat or bowler—lending it a thought...

Metal Art of a Tank c1970 Introducing a stunning piece of artisan craftsmanship that transcends mere decoration: a handmade scrap metal tank from the 1970s, skill-fully assembled fro...

Carole Eisner's indoor sculptures, averaging two to four feet tall, are made from a welded collage of drops and cut-out steel pieces from the same series of scrap she found in a Conn...

Original vintage Soviet propaganda poster encouraging workers to save and recycle spare metal - Workers of Industry Collect Scrap Metal!

Lucien Smith (American, b. 1989) Untitled (Scrap Metal 4415), 2013 Steel 35 x 35 x 15 inches Provenance: OHWOW, Los Angeles Private Collection Wright, 2015, Lot 139 One of the mos...

1781 Brutalist metal sculpture made from scrap metal parts, Arms are adjustable

Beautifully sculpted male and female elephants made from salvaged scrap metal and done in a modernist form. Indistinctly signed by artist.

Scrap metal

Scrap metal

Eventually this piece was crudely but sturdily patched for even more utility, supported both front and back with scrap metal. Tortured and timeless. Give it a well-earned retirement ...

Welding brought Weinstein's artistic abilities to the surface and by the early 1960s, he was transforming scrap metal into works of art.

Robot sculpture composed of various scrap metal elements, vintage electronic equipment and car parts by Steve Heller.

Dimentional art "Scrap Metals II" painted metalic paper on board-framed under glass by Lawrence S.

This is a cool geometric adorned stainless steel scrap metal box made by a polish immigrant folk artist Stanley Szwarc in 1999

A mixture of nuts and bolts and scrap metal with gears welded together to make this Brutalist sculpture a real show stopper Bruce Gray known for his art in many museums and private ...

December 1959, Scrap Metal Loading Area, 8A Yard between 9th & 8th Street by Kent Avenue.

The sculpture is done entirely of scrap metal, with some pipe, metal slugs and chain and configured into a standing figure with chained hands.

A piece left in a city antique shop in San Juan, as a result of the Gangs of Puerto Rico scrap metal wars of 1995, this piece is from a large sugar cane processing machine or turbine...

When Weinstein finished his high school, he started working with his father who owned a scrap metal yard. Soon he started designing, creating his own sculptures.

Great design depicting the Nazi German leader Adolf Hitler with the Italian leader Benito Mussolini and the Japanese leader Emperor Hirohito running with rats in fear from falling sc...

It was Arun's initiative, whose passion for creating beauty from seemingly mundane materials led him to transform scrap metal into stunning works of art. Arun and Gaurav have worked ...

Information: It was Arun's initiative, whose passion for creating beauty from seemingly mundane materials led him to transform scrap metal into stunning works of art. Arun and Gaurav...

It was Arun Agarwal initiative, whose passion for creating beauty from seemingly mundane materials led him to transform scrap metal into stunning works of art. Arun Agarwal and Gaura...

It was Arun Agarwal initiative, whose passion for creating beauty from seemingly mundane materials led him to transform scrap metal into stunning works of art. Arun Agarwal and Gaura...

It was Arun Agarwal initiative, whose passion for creating beauty from seemingly mundane materials led him to transform scrap metal into stunning works of art. Arun Agarwal and Gaura...

In his artistic career, Svend Ritter has mainly created sculptures in metal – bronze, iron sheets and scrap metal. Despite their abstract form, the works are often anecdotal and humo...

Set within a framework of blackened, burnt silver and copper scrap metal,these colorful and joyous creatures integrate with the debris of their newfound landscapes and inspire the re...

Set within a framework of blackened, burnt silver and copper scrap metal,these colorful and joyous creatures integrate with the debris of their newfound landscapes and inspire the re...

A few years ago he reinvented himself and started making sculptures out of scrap metal from his father's business. His pieces include metal, enamel and glass.

Set within a framework of blackened, burnt silver and copper scrap metal,these colorful and joyous creatures integrate with the debris of their newfound landscapes and inspire the re...

What, at first glance, appears to be a sheet of scrap metal pulled from a junk yard, with its dings and welds and rust, is just an illusion.

Set within a framework of blackened, burnt silver and copper scrap metal,these colorful and joyous creatures integrate with the debris of their newfound landscapes and inspire the re...

Set within a framework of blackened, burnt silver and copper scrap metal,these colorful and joyous creatures integrate with the debris of their newfound landscapes and inspire the re...

Using steel, timber, and wire cable, along with scrap metal and discarded tires, he developed the structural language for which he has become known.

What, at first glance, appears to be a sheet of scrap metal pulled from a junk yard, with its dings and welds and rust, is just an illusion.

Very early on, these food traders were joined by the flea market and antique and scrap metal dealers. The flea market, which took place from Palm Sunday to Easter Sunday in 1940, re...

After earning his certification, he started experimenting with scrap metal, transforming discarded materials into artworks.

An exceptional mid-20th century industrial iron planter, salvaged from a European factory where it once served as a utilitarian vessel for holding raw materials and/or scrap metal du...

Scott McMillin is perpetuating the tradition of well-known scrap metal artists such as John Chamberlain or Cesar to create unique abstract geometric compositions.

Scott McMillin is perpetuating the tradition of well-known scrap metal artists such as John Chamberlain or Cesar to create unique abstract geometric compositions.

Scott McMillin is perpetuating the tradition of well-known scrap metal artists such as John Chamberlain or Cesar to create unique abstract geometric compositions.

In the early 1940s César discovered the opportunities that scrap metal opened up, and his first solo exhibition, “Animaux en ferraille” (or “Scrap metal animals”), was held at the Ga...

Scott McMullin is perpetuating the tradition of well-known scrap metal artists such as John Chamberlain or Cesar to create unique abstract geometric compositions.

In the early 1940s César discovered the opportunities that scrap metal opened up, and his first solo exhibition, “Animaux en ferraille” (or “Scrap metal animals”), was held at the Ga...

In the early 1940s César discovered the opportunities that scrap metal opened up, and his first solo exhibition, “Animaux en ferraille” (or “Scrap metal animals”), was held at the Ga...

In the early 1940s César discovered the opportunities that scrap metal opened up, and his first solo exhibition, “Animaux en ferraille” (or “Scrap metal animals”), was held at the Ga...

Vintage One of a kind 1950s handmade metal Robot ashtray with articulating arms, pullout drawer and ash tray that comes out to be cleaned. On a hard plastic acrylic five angled Penta...

Malaval was inspired by the scrap metal remaining after the war production, principally the perforated steel from ammunition factories where the stamped hole patterns were the direct...

The Spanish word "chatarra" refers to scrap metal, mechanical debris, or discarded material.

Below is how the Museum described the series: These fanciful totemic objects, lovingly named Bruce, are made of steel purchased from a scrap metal yard in the Meatpacking District, j...

The term “Gluts” refers to Rauschenberg’s series of sculptural assemblages created from scrap metal and industrial detritus. Inspired by a 1985 visit to Houston, Texas, during an eco...

Made on found objects, including scrap metal, book pages, and discarded envelops, his richly colored depictions of trucks, figures, and coil-shaped abstractions, described a fraught ...

Made on found objects, including scrap metal, book pages, and discarded envelops, his richly colored depictions of trucks, figures, and coil-shaped abstractions, described a fraught ...

Made on found objects, including scrap metal, book pages, and discarded envelops, his richly colored depictions of trucks, figures, and coil-shaped abstractions, described a fraught ...

Made on found objects, including scrap metal, book pages, and discarded envelops, his richly colored depictions of trucks, figures, and coil-shaped abstractions, described a fraught ...

Made on found objects, including scrap metal, book pages, and discarded envelops, his richly colored depictions of trucks, figures, and coil-shaped abstractions, described a fraught ...

Made on found objects, including scrap metal, book pages, and discarded envelops, his richly colored depictions of trucks, figures, and coil-shaped abstractions, described a fraught ...

Made on found objects, including scrap metal, book pages, and discarded envelops, his richly colored depictions of trucks, figures, and coil-shaped abstractions, described a fraught ...