Vintage Risers

Ultra rare with the wooden riser for the chair. The chair is still in his original upholstery.

Solid cherry wood, two gray/cream colored diamond pattern fabric upholstered step risers, straight legs, and stretcher base. Made in the USA, in the late 20th Century.

Black wooden risers and elmwood veneer book shelves and cabinet with black metal hooks.

Teak wall unit, with black wooden risers and brass supports. The wall- unit has some signs of use.

The heart shaped backs are finely hand carved with a Windsor feathers in the center and jabots connecting the vertical risers. The legs are tapered and end in spade feet.

Measures: Risers Four 52 x18 cm Two 77 x 28 cm 2 x 77 x 18 cm Shelves: Two 20 x 58 cm Three 30 x58 cm Ten 20 x 78 cm.

This system is made of pinewood and constists of total four shelves and three white metal risers. We photagraphed them in two sets of four shelves and three risers each.  

The form is 20.5" height from the base to the bottom of the brass riser. The brass riser is 15" height to the top of the brass double socket cluster.  

The wall unit consist of: 3x cabinet: 50 x 85 x 45cm (LxDxH) 3x cabinet: 28 x 85 x 45cm (LxDxH) 1x cabinet with light: 25 x 85cm 1x shelf: 18 x 85cm 3x back plates and 4x risers.

Starting on a square base it rises to a smaller round riser. The main part of the obelisk is scaled evenly with the bottom and makes for a great line to the top.

One counter height large butcher block with 4" wood riser. Taken out of a commercial kitchen.

Nisse string for strinning vanity with mirror Vanity or desk by String in pinewood and with black metal risers. Width: 78 cm Depth: 45 cm Height cabinet: 38 cm.

Vintage wall system in the style of Pira Sweden. Black metal risers which are attached to the wall and five oak veneer shelves.

This elegant brass and glass shallow saucer light has a brass retainer and riser with matching ceiling plate. The delicate lace pattern of the main dish is finished with a five ring ...

Great benches that also would be perfect coffee tables or display risers. Price is for the pair.

Attributed to James Mont, this pair of handsome tiered giltwood lamps with cat's paw bases on ebony risers are the perfect transitional lamps. Modern simplicity, chinoiserie details,...

Dekker for Tomado Holland rosewood veneer book shelves or wall unit Tomado book shelves with black metal risers and six rosewood veneer shelves. Measures: Width 137 cm Height ...

Oak arms feature subtle carved detailing along the curves. Please note: foot risers have been replaced, not pictured. Dimensions: 23" W x 20" D x 38" H x 19" seat height.

Nice detailing including reeded center rod and thumb turn adjustable shade riser. Newly wired for US with new double sockets and cord.

Recently added custom Lucite riser and new high quality brown cloth wrapped lamp cord.

This system is made of teak and consists of four teak shelves and three black metal risers.    

Brass body sits atop a painted wood base. Tall painted wood riser above brass element. Lamp measures 45 in. high to top of finial, 38 high to top of lamp fitting.

Seven teak shelves and six black metal risers. Measures: Total length 185 cm height 90 cm depth 50 cm Three x shelve: 63.5 x 19 cm Two x shelve: 63.5 x 28 cm Two x corner s...

Measurements: The height from the base to the top of the riser is 43". The diameter is 12.5".

This system is made of pinewood and constists of total three shelves and three transparant plastic risers. Measures: Width: 79.5 cm Height: 50 cm Depth: 20 cm.

The pieces can be attached to each-other by using the iron risers that can hold the mounting brackets for the pieces.

Vintage Nisse Strinning for string pinewood shelving system, Sweden, 1960s This shelving system with its minimalistic looks, was designed by Swedish architect Nils “Nisse” and his...

The base of the lamp is 10" diameter with the adjustable articulating shade extending 14.5" from the vertical riser. The overall height from the floor to the to the top of the metal ...

Open architecture including a riser reminiscence of Flying Buttresses found on Medieval cathedrals in Europe.

The pieces can be attached to each-other by using the iron risers that can hold the mounting brackets for the pieces.

Construction is a simple triple stack of sea green glass held by a brass plated bent steel bracket which secures four round riser feet that elevate the pieces off the potentially wet...

The 3/4" glass tops are new replacements and are lifted off of the base with small acrylic risers.

Newly wired for US with on/off double clusters, adjustable shade risers and French style rayon covered cords. Glass lamps in this more simple style are often attributed as being Mura...

Our wall unit is a fine example that exists of 8 shelves (7x 20 x 80 cm and 1x 24 x80cm), two cabinets, and 4 risers. Width: 240 cm Height: 200 cm Depth: 38 cm.

Our wall unit is a fine example that exists of six shelves (20 x 80 cm), two cabinets and three risers. Measures: Width: 165 cm Height: 175 cm Depth: 30 cm.

The pieces can be attached to each-other by using the iron risers that can hold the mounting brackets for the pieces.

height is 21.5 inches to the top of the bronze lid, not including the riser for the sockets. diameter given of 15 inches to the outside of the handles. top rim diameter is approx. 1...

Finely cast solid bronze body, riser, and decorative ceiling ring show an expert touch in casting techniques.

Large freestanding wall unit by Poul Cadovius for Royal system. With 4 black metal risers and teak veneer cabinets and shelves. 1x cabinet with sliding doors 42.5 x 37,5 x 160 cm ...

The two-socket cluster at the top can be raised or a riser can emanate from the top, depending on the style and size of the shade, and where you want the bulbs positioned.

Please look at the proportion of the cylindrical chrome tubing that makes up the vertical legs and the horizontal supports that directly reach the floor and stand upon circular riser...

Finely cast solid bronze body, riser, and decorative ceiling ring show an expert touch in casting techniques.

The Diamonds total 6.92 carats by gauge and formula and are set in White Gold while the shank, riser, under carriage and raised border surround are crafted in polished Yellow Gold.

Custom Matted: 3 Rising Museum 8-Ply thickness boards, together with side spacers and foam risers that separate each mat from the other, thus creating a very special format for the ...

The microphone is in a wonderful state with a factory riser and rare factory Altec Stand. This model was used for voice, instruments and vocals and is a very clean example; beautiful...

Custom Matted: 3 Rising Museum 8-Ply thickness boards, together with side spacers and foam risers that separate each mat from the other, thus creating a very special format for the m...

Light were never used on tripods, only on real riser articulated metal light stands. You will not find another like this one.

Custom Matted: 3 Rising Museum 8-Ply thickness boards, together with side spacers and foam risers that separate each mat from the other, thus creating a very special format for the ...

Custom Matted: 3 Rising Museum 8-Ply thickness boards, together with side spacers and foam risers that separate each mat from the other, thus creating a very special format for the ...

Custom Matted: 3 Rising Museum 8-Ply thickness boards, together with side spacers and foam risers that separate each mat from the other, thus creating a very special format for the ...

Custom Matted: 3 Rising Museum 8-Ply thickness boards, together with side spacers and foam risers that separate each mat from the other, thus creating a very special format for the ...

Custom Matted: 3 Rising Museum 8-Ply thickness boards, together with side spacers and foam risers that separate each mat from the other, thus creating a very special format for the ...

Custom Matted: 3 Rising Museum 8-Ply thickness boards, together with side spacers and foam risers that separate each mat from the other, thus creating a very special format for the ...

Custom Matted: 3 Rising Museum 8-Ply thickness boards, together with side spacers and foam risers that separate each mat from the other, thus creating a very special format for the ...

Custom Matted: 3 Rising Museum 8-Ply thickness boards, together with side spacers and foam risers that separate each mat from the other, thus creating a very special format for the ...

Custom Matted: 3 Rising Museum 8-Ply thickness boards, together with side spacers and foam risers that separate each mat from the other, thus creating a very special format for the ...

Charming vintage bamboo stool featuring a classic scorched finish and clean, versatile lines. Perfect as a decorative accent on a dresser, layered with stacked books, or used as a pe...

A French iron garden plant pot holder stand jardiniere, circa early-20th century, France. This sculptural flower or plant holder displays beautifully; piece is oblong iron with accen...

Set of 2 Night Stands by La Permanente Mobili Cantù, Italy, 1950's Very elegantly executed set night stands by La Permanente Mobili Cantù in dark lacquered wood, cut glass and with ...

20th Century French wrought iron multi-tier plant stand / florist’s display. Formed with graduated circular tiers and multiple ring holders for individual pots, raised on four splay...

Rare and fine pair of dressers / chests / storage cabinets designed by T.H. Robsjohn-Gibbings for the John Widdicomb Company, 1950s. The mahogany cases have been expertly refinished ...

Antique corner plant etagere. Item #: GE-0104 Dimensions: 40”H x 40.75”D x 59”W

Spacious mid-century sideboard, likely of Italian origin, dating to the 1960s. The body is finished in warm-toned teak veneer and features three doors alongside four recessed drawers...

Great looking mid century highboard or sideboard with beautiful veneer wood and a chrome and wooden base. The sideboard consists of 4 doors and 4 drawers providing loads of storage ...

A wonderful multifunctional Italian sideboard cabinet bar style of Paolo Buffa, 1950s. Measures: H 37.41 in. x W 70.87 in. x D 19.69 in. H 95 cm x W 180 cm x D 50 cm.

Art Nouveau bronze numbers cast in bronze from the design of Hector Grimard from France. They are priced ( Each ) We have many of them . Let us know which one's you are interested ...

Splendid Paolo Buffa Wooden Cabinet with wooden frames containing flowers decorated ceramic tiles, and larger central frames containing fashion prints, Italy 1950s

The Italian credenza or sideboard bar by Vittorio Dassi is a refined piece of furniture, featuring a glass top and maple interiors. The front is made up of eight drawers and two door...

COD-2534 Paolo Buffa (1903-1970) Rare walnut bar cabinet with maple inlaid front and lacquered metal interior. Two maple drawers with glass fronts, mirrors and hidden light. Drawing...

Exceptional cabinet by Paolo Buffa in walnut with mahogany interior and brass detail. Italy circa 1950. Measures: height 133cm, width 26cm, depth 45cm.