Andreas Tuck Furniture

A brown, vintage Mid-Century Modern Danish coffee, sofa table made of hand crafted Teakwood, designed by Hans J. Wegner and produced by Andreas Tuck in good condition. Wear consistent with age and use. Circa 1960 Denmark, Scandinavia. Hans Jorgensen Wegner...

Minimalistic and elegant, oiled teak and oak coffee table by Hans J. Wegner, Model AT15 produced by Andreas Tuck. The materials used in this coffee table are solid teak and oak wood...

Extendable teak table by Hans Wegner, manufactured by Andreas Tuck in Denmark. The total length in the extended position is 240 cm. When the two extra leaves in the center are remove...

Danish Teak and Oak AT-312 Dining Table by Hans Wegner for Andreas Tuck, 1960s. Lovely Scandinavian Mid-Century Modern Model AT 312 dining table with frame and legs in solid Nordic ...

Stunning “Sabre leg” dining table by Hans J. Wegner with teak table top and beech legs. Excellent construction with brass extenders holding up the drop leaves steadily. The brass ext...

Coffee table by Hans J. Wegner, in a clean, balanced design. Striking Wenge tabletop and round stained oak legs.

Hans J. Wegner "AT-319" rosewood & steel drop-leaf dining table for Andreas Tuck  Dimensions: Dining Table: 28in H x 71in - 118in W x 29.25in D 2x Extension Leaf 23.50in ____...

Iconic AT-312 dining table designed by Hans J. Wegner and produced by Andres Tuck in the 1950s. Crafted in teak, the table features practical extension leaves for additional seating....

A teak and woven cane coffee table, danish manufacture, Andreas Tuck, design by Hans Wegner, 1950s The clean, organic lines of Scandinavian fu...

Dimensions: approx. 75 × 45 × 60 cm (29.5" × 17.7" × 23.6") Width × Depth × Height Elegant bar trolley designed in 1959 by Hans J. Wegner and manufactured by Andreas Tuck, Denmark. ...

Super elegant and rare Gateleg dining table with top and flaps in veneered teak, frame in solid oak the form of eight round, tapered legs. Rare model, produced in limited numbers by ...

A rare and exceptional Danish Modern drop-leaf dining table By Hans J. Wegner for Andreas Tuck Denmark, 1950s Teakwood top, on tapered dowel oakwood legs with arched aprons....

Sculptural and refined three-leg table designed by Hans J. Wegner and produced by master cabinetmaker Andreas Tuck in Denmark during the 1960s. The table features a beautifully figur...

Mid Century Danish oak side table designed by Hans J. Wegner. Produced by Andreas Tuck, Denmark. Beautifully made oak tabletop with lower magazin...

Hans J Wegner, Danish Teak & Oak Drop-Leaf Dining Table by Andreas Tuck, 1950s Designed by Hans J Wegner in 1950 and manufactured by cabinetmaker Andreas Tuck in Demmark, this is th...

This magnificent drop-leaf table by Danish designer Hans J. Wegner can be used both as a work desk and as a dining table. The design is from 1955 and this particular table is from th...

An exceptional example of Danish modern design, this iconic AT-304 dining table was designed by Hans J. Wegner for master cabinetmaker Andreas Tuck in Denmark, circa 1955. Celebrated...

Mid century Danish dining table with a full of grain teak top (and 2 extensions) by the great designer Hans Wegner, in the original edition executed by cabinetmake Andreas Tuck (sign...

Beautifully crafted model AT-33 sewing table designed by Hans Wegner and manufactured in Denmark by cabinet maker Andreas Tuck. This teak and oak table features two extendable side l...

Beautifully crafted early example end or side table designed by Hans Wegner and manufactured in Denmark by cabinet maker, Andreas Tuck. This teak and oak table has two extendable sid...

Set of nesting tables in well patinated finished Scandinavian oak designed by Maa. Hans Jørgen Wegner for Andreas Tuck. Great condition.

This oak and teak “AT-312” dining table was designed by Hans Wegner in the 1950s and its title of ‘iconic’ is well deserved. Created by a designer who is credited as one of the main ...

Sewing table in solid teak and oak, designed by Hans J Wegner and made by cabinetmaker Andreas Tuck. The table has two drop-leafs, a front drawer with several compartments and a hand...

Wonderful minimalistic design by Danish designer Hans J. Wegner in solid Scandinavian oakwood. This iconic set of model AT-40 tables was made in the 1960s at cabinetmaker Andreas Tuc...

Danish side table designed by Hans J. Wegner for Andreas Tuck, Model AT-33. Handcrafted from solid white oak, the table features two drop leaves, a center drawer with built-in compar...

Dining Table, Model AT-319, in Rosewood and Steel by Hans J. Wegner, 1960s Additional Information: Material: Rosewood and chromed steel Style: Mid Century, Scandinavian Dining Table...

Rare extendable dining table by Hans J. Wegner for Andreas Tuck, Denmark, 1960s (marked). The table features a teak top resting on an oak frame, combining warmth and structure in a w...

Iconic Coffee Table T-11 by Hans Wegner for Andreas Tuck, Denmark. This piece has a teak top with oak legs and marked underneath. Designed in 1954 and manufactured during the 1950s t...

Danish "Saber-Legged" dining table designed by Hans J. Wegner for Andreas Tuck in Denmark in 1950. This iconic AT-304 table comprises a teak top with two drop leaves. The architectural crossed...

This is an AT-304 Dining Table, originally designed by Hans Wegner for Andreas Tuck in 1950. This particular example was produced in Denmark and dates back to the 1960s. Crafted in t...

Magazine rack in solid beech. Designed by Frits Henningsen for Andreas Tuck. Made in Denmark. Great original condition.

Hans J. Wegner oak dining table with two drop-leaves and cross-legs, stretchers of brass. Very fine condition. Designed by Wegner 1950 and manufactured by cabinetmaker Andreas Tuck...

Coffee table in teak and oak designed by Hans J. Wegner and manufactured by Andreas Tuck in the 1960s. The table is in great vintage condition. H - 50 cm, W - 150 cm and D - 61 cm.

Mid-Century Modern Coffee Table by Hans Wegner, Oak Hans J Wegner, An oak wood coffeee table for Andreas Tuck, Denmark, Manufacturer mark on underside. Other Scandinavian designe...

Mid-Century Modern Danish occasional table by Hans Wegner. Two drop leaves. Wheels depth 45/79 cm.

This is a Round Side/End or Coffee Table, Model AT008 (now called the CH008), designed by Hans Wegner and produced by Andreas Tuck in Denmark. It features a circular teak top and has...

This is the original edition of this table created in 1962 by Hans Wegner and made (stamping) by Andreas Tuck. By using vertical wooden uprights to form the belt under the tabletop, ...

Serving Trolley / Bar Cart by Hans Wegner in a rare combination of teak and oak wood. The trolley was manufactured by Andreas Tuck. It beautifully pairs a solid oak frame with rich t...

Bartrolley designed by Hans J. Wegner in 1959 and manufactured by Andreas Tuck. Sold at Illums Bolighus, a former department store in Copenhagen, Denmark. The solid teak frame is in ...

Original square coffee table. Designed by Hans J Wegner for Andreas Tuck Denmark. Made from solid oak. Very good condition.

A teak-top dining table with two removable drop leaves, on tapered dowel oakwood legs with arched aprons. Full span with leaves measures 70" wide.

The AT-10 occasional table, designed by Hans J. Wegner for Andreas Tuck in the 1950s, exemplifies Wegner's ability to combine functionality with simple, elegant design. Crafted from ...

This is a Set of Three Graduated Nesting Tables dating to the 1960s, designed by Hans Wegner for Andreas Tuck in Denmark. The tops of the tables are made with rich teak, and the fram...

Hans J. Wegner “Sawbuck” Dining Table (Model AT-303) for Andreas Tuck, c. 1950s — Oak Version This iconic dining table, often referred to as the “Sawbuck Table” (Model AT-303), was ...

Hans J. Wegner coffee table, solid oilec teak, legs of oiled oak. Made by Andreas Tuck. Model AT11

Mid-Century Modern original coffee table designed by Hans Wegner for Andreas Tuck model AT-11. This solid planked teak tabletop displays a sleek Minimalist design with raised rounded...

Oak and teak. Measurements: L: 76.5 cm / 2’ 6” W: 102 cm / 3’ 4” H: 73 cm / 2’ 4 3/4" L with extension: 198 cm / 6’ 4”. Hans J. Wegner is the father of Danish design and is well ...

Hans J. Wegner coffee table, solid soap treated oak Made by PP Møbler.

Hans Wegner for Andreas Tuck AT-305 Mid Century Danish Teak Drop Side Desk This desk measures: 53.5 wide x 29.75 deep x 28.5 inches high, with a chair clearance of 23.25 inches, the...

Early Hans J. Wegner teak desk with three integrated drawers and two drop leaves. Designed 1955 and manufactured by cabinetmaker Anders Tuck, Denmark. Marked by maker. Dimension:...

Beautiful Teak and Oak Hans Wegner coffee table for Andreas Tuck,model AT-11. features teak top with raised lip and round tapered Oak legs. Classic danish modern design. marked on un...

Simple and elegant, wenge with oak legs cocktail table by Hans Wegner. Turned legs which conveniently unscrew for transportation. Thick top, well constructed. In excellent vintage co...

Dimensions: Ø 62 × 48 cm (24.4" × 18.9") Diameter × Height Original Danish serving and coffee table designed in 1945 as model AT-35 by Hans J. Wegner. Originally manufactured by And...

Minimalistic Danish Modern table by Hans J. Wegner. The top is made from hardwood Wenge with an amazing wood grain structure. The legs are made from solid turned oakwood. Manufacture...

American mid-century teak wood sewing table with two drop leaves on either side, a single drawer with two wooden knob drawer pulls, and a sliding compartment containing a removable woven wicker basket over a smaller stretcher shelf connecting four...

Pair of oak end tables with integrated trays, designed by Hans J. Wegner for Andreas Tuck. Robust and refined, the tables are constructed in honey-toned oak with lower shelves and su...

Work table in solid teak designed by Maa. Hans J. Wegner for Andreas Tuck cabinetmakers, Denmark. Great original condition.

We present a rare AT321 extension dining table, designed by Hans J. Wegner and produced by Andreas Tuck circa 1960. This is one of the most luxurious table designs by Wegner in the m...

This is a rare and early all oak Hans J. Wegner dining table AT-304 with two drop-leaves, cross-legs and stretchers of brass. Designed by Wegner 1950 and manufactured by cabinetmake...

AT 304 - 'Sabre leg table' with frame in oak and top in teak. Flaps extend the length with 110 cm extra. Stamped from manufacturer Andreas Tuck. Designed by Hans J. Wegner.