Magis Furniture

Brand: Magis Design: Jasper Morrison Model: Air-Armchair Air-Armchair is a stackable chair with armrests designed by Jasper Morrison for Magis. The design continues the philosophy o...

The starting point of this project was a specific manufacturing method: cast iron. It is one of the oldest ways of using ferrous metals. The manufacturing process has a physicality a...

Postmodern clear lucite magazine rack by Andries & Hiroko van Onck for Magis Italy, circa 1991. Light and minimalist, the transparent magazine stand is also great for holding catalog...

Brand: Magis Design: Oiva Toikka Model: Downtown Downtown is a sculptural bookcase designed by Oiva Toikka for Magis. The design draws inspiration from the urban landscapes of moder...

Forging, the process used to shape iron, pressing it between the hammer and anvil, has a history that stretches back over millennia. Throughout the ages, this technique has been used...

Brand: Magis Design: Stefano Giovannoni Model: First Price refers to the purchase of four chairs. First is a stackable chair designed by Stefano Giovannoni for Magis, combining erg...

The 360° collection consists of a chair, a stool, a table and two containers on wheels, which open the way to a new concept of office work. The stool 360° (and also the chair) is unc...

Brand: Magis Collection: Déjà-vu Design: Naoto Fukasawa Model: Déjà-vu Métal Déjà-vu Métal is a stool designed by Naoto Fukasawa for Magis, characterized by a refined balance betwe...

Brand: Magis Collection: Déjà-vu Design: Naoto Fukasawa Model: Déjà-vu Métal - Low Stool Déjà-vu Métal is a stool designed by Naoto Fukasawa for Magis, characterized by a refined ba...

Geometric, sculptural, and deeply convivial, the extendable Pied-à-Terre table by BrogliatoTraverso for Magis reinterprets the round table as an architectural gesture that eliminates...

Brand: Magis Design: Eero Aarnio Model: Pingy Pingy is a playful penguin-shaped figure designed by Eero Aarnio, reflecting the Finnish designer's iconic approach to joyful, imaginat...

Baguette is a rectangular, large table in two parts. An opaque top rests on a highly resistant yet delicate aluminium base. We focused our attention on the structure of the project t...

A die-cast aluminium shell made up of many small, perforated and triangular faces. Chair_One is in a certain sense built like a football, i.e. with a series of flat ele- ments joined one to the other at angles to create a three-dimensional shape. All this is achieved by exploiting the potential of die-casting which is a precise technology allowing complex three-dimensional shapes to be obtained from metal (in this case aluminium). The result is therefore a chair in which the spaces prevail over the solid parts to characterise its aesthetic quality. Chair_One has now become a classic of the future. Chairs, stools, tables and seating systems for domestic and contract use (bars and restaurants). Chair_One: legs in polished, anodised or painted aluminium; concrete base painted transparent natural or black; base and seat in die-cast aluminium treated with sputtered fluorinated titanium and painted in polyester powder. Suitable for outdoor use (painted version). Flame-retardant. Also available cushions in fabric (Kvadrat “Steelcut Trio” or “Steelcut 2”) or in leather for indoor use and cushions in polyurethane for outdoor use. Stool_One: legs in anodised aluminium or painted in polyester powder. Seat in die-cast aluminium treated with sputtered fluorinated titanium and painted in poly- ester powder. Suitable for outdoor use. Also available cushions in fabric (Kvadrat “Steelcut Trio” or “Steelcut 2”) or in leather for indoor use. Table_One_Bistrot: frame in anodised aluminium natural or black (suitable for out- door use); concrete base painted transparent natural or black; top in HPL laminate. Chair_One Public Seating System 1: concrete bases painted transparent clear, suitable for floor-fixing. Bar in anodised aluminium. Seat in die-cast aluminium treat- ed with sputtered fluorinated titanium and painted in polyester powder. Concrete small table...

Air-Family takes its name from the “air-moulding” technology that makes it possible to create highly resistant yet super-lightweight products out of polypropylene added with fibregla...

Designed by Ronan & Erwan Bouroullec, the Steelwood collection is the combination between two traditional materials, wood and steel plate, which together create simple yet elegant and sophisticated design products. The first product produced was the Steelwood Chair...

Developed by Magis in 1990, and redesigned in 2003, XZ3 is a table featuring a chromed or epoxy painted steel rod structure with an architectural style reminis- cent of a slender pyl...

After Air-Chair, the first seat to use air-moulding technology, the chair First breaks new ground in this technology once again (hence its name). The empty frame is used not only for...

Created by Eero Aarnio, master of Scandinavian design culture and innovator on the international scene ever since the sixties, Puppy is a little dog as imagined by the great designer...

The 360° collection consists of a chair, a stool, a table and two containers on wheels, which open the way to a new concept of office work. The stool 360° (and also the chair) is unc...

As its name suggests, Passe-partout is a table suitable for any space and occa- sion, as well as looking great with any chair from the Magis catalogue. Passe-partout offers solutions...

The Plato chair designed by Jasper Morrison is versatile in use and well suited for domestic, professional, and public spaces - indoors and outdoors. Under- stated and with a neoclassical inspiration, hence the name that references one of the pillars of ancient philosophy, the Plato chair is the manifestation of a perfect balance between form and function. It features a sleek yet robust structure with a curved seat for maximum comfort. As Jasper Morrison declares, “a fully recyclable chair...

After Air-Chair, the first seat to use air-moulding technology, the chair First breaks new ground in this technology once again (hence its name). The empty frame is used not only for...

Baguette is a rectangular, large table in two parts. An opaque top rests on a highly resistant yet delicate aluminium base. We focused our attention on the structure of the project t...

Raviolo was done by making a continuous looped ribbon with a defined inside and outside texture that serve to make the continuous band more readable, and like stuffed pasta the ribbo...

As Issey Miyake said, “Déjà-vu, the sensation of having been therefore before, of already having done something or met someone. Fukasawa’s design reawakens the fairy godmother, the ...

Déjà-vu: a simple, highly iconic stool with seat in die-cast aluminium and legs in extruded aluminium, available both in polished and painted version (the latter suitable for outdoor...

A die-cast aluminium shell made up of many small, perforated and triangular faces. Chair_One is in a certain sense built like a football, i.e. with a series of flat ele- ments joined one to the other at angles to create a three-dimensional shape. All this is achieved by exploiting the potential of die-casting which is a precise technology allowing complex three-dimensional shapes to be obtained from metal (in this case aluminium). The result is therefore a chair in which the spaces prevail over the solid parts to characterise its aesthetic quality. Chair_One has now become a classic of the future. Chairs, stools, tables and seating systems for domestic and contract use (bars and restaurants). Chair_One: legs in polished, anodised or painted aluminium; concrete base painted transparent natural or black; base and seat in die-cast aluminium treated with sputtered fluorinated titanium and painted in polyester powder. Suitable for outdoor use (painted version). Flame-retardant. Also available cushions in fabric (Kvadrat “Steelcut Trio” or “Steelcut 2”) or in leather for indoor use and cushions in polyurethane for outdoor use. Stool_One: legs in anodised aluminium or painted in polyester powder. Seat in die-cast aluminium treated with sputtered fluorinated titanium and painted in poly- ester powder. Suitable for outdoor use. Also available cushions in fabric (Kvadrat “Steelcut Trio” or “Steelcut 2”) or in leather for indoor use. Table_One_Bistrot: frame in anodised aluminium natural or black (suitable for out- door use); concrete base painted transparent natural or black; top in HPL laminate. Chair_One Public Seating System 1: concrete bases painted transparent clear, suitable for floor-fixing. Bar in anodised aluminium. Seat in die-cast aluminium treat- ed with sputtered fluorinated titanium and painted in polyester powder. Concrete small table...

Air-Family takes its name from the “air-moulding” technology that makes it possible to create highly resistant yet super-lightweight products out of polypropylene added with fibregla...

A die-cast aluminium shell made up of many small, perforated and triangular faces. Chair_One is in a certain sense built like a football, i.e. with a series of flat ele- ments joined...

The design of the Cyborg armchair is based on an industrial part consisting of the four very simple plastic legs, almost basic, deliberately “non-designed” and on an ar- tisanal “des...

Forging, the process used to shape iron, pressing it between the hammer and anvil, has a history that stretches back over millennia. Throughout the ages, this technique has been used...

Air-Family takes its name from the “air-moulding” technology that makes it possible to create highly resistant yet super-lightweight products out of polypropylene added with fibregla...

Bell is not only a monobloc chair. It is a symbol of responsibility. Bell Chair is available in four colours – Sunrise, High Noon, Midnight and Dawn. It...

Air-Family takes its name from the “air-moulding” technology that makes it possible to create highly resistant yet super-lightweight products out of polypropylene added with fibregla...

Milà is an expressive and light collection that is very rich in movement, inspired by the façade of Gaudí’s famous Batlló house and based on the forms and the princi- ples of Catalan modernism: elastic and dynamic. The chair is truly elegant and comfortable with or without cushions, and it is a warm and inviting object for everyone. The collection also includes a table that is available in different dimensions. The ver- satile table features an angled tubular steel frame with die-cast details and a range of different tops. CHAIR Milà chair...

Forging, the process used to shape iron, pressing it between the hammer and anvil, has a history that stretches back over millennia. Throughout the ages, this technique has been used...

Troy is a concept of remarkable simplicity and comfort that gives shape to practically endless possible variations, playing on the use of different materials, combinations and seat t...

Milà is an expressive and light collection that is very rich in movement, inspired by the façade of Gaudí’s famous Batlló house and based on the forms and the princi- ples of Catalan modernism: elastic and dynamic. The chair is truly elegant and comfortable with or without cushions, and it is a warm and inviting object for everyone. The collection also includes a table that is available in different dimensions. The ver- satile table features an angled tubular steel frame with die-cast details and a range of different tops. CHAIR Milà chair...

Troy is a concept of remarkable simplicity and comfort that gives shape to practically endless possible variations, playing on the use of different materials, combinations and seat t...

Transit food trolley - Davide Mellor for Magis made in Italy 1990s Measurements when closed are: h 89 cm, l. 13.5 cm.

Brand: Magis Design: Stefano Giovannoni Model: First Price refers to the purchase of four chairs. First is a stackable chair designed by Stefano Giovannoni for Magis, combining erg...

Brand: Magis Design: Benedetta Mori Ubaldini Model: Clouds - Cloud Medium Clouds - Nuvola Medium is a poetic hanging sculpture designed by Benedetta Mori Ubaldini for Magis. Positio...

Brand: Magis Model: In-Side Designer: Thomas Heatherwick Product Type: Sofa Description: Sofa. Material: polyethylene containing post-consumer recycled material. Side chips in multi...

Brand: Magis Design: Marcel Wanders Model: Cyborg Club Cyborg Club is an armchair designed by Marcel Wanders for Magis, part of the Cyborg collection that explores the fusion betwee...

Designed by Konstantin Grcic for Magis, the 360° drawer unit on wheels combines stylistic intuition with functional design. This versatile storage solution is ideal for contemporary ...

Designed by Konstantin Grcic for Magis, Bishop is a chair defined by its essential and bold profile, conceived for contemporary spaces where geometry becomes a design statement. Prem...

Brand: Magis Design: Konstantin Grcic Model: Bell Chair Price refers to the purchase of 12 chairs. Bell Chair is a stackable chair with armrests designed by Konstantin Grcic for Ma...

Brand: Magis Model: In-Side Designer: Thomas Heatherwick Product Type: Armchair Description: Armchair. Material: polyethylene containing post-consumer recycled material. Side chips ...

Brand: Magis Design: Javier Mariscal Model: El Baúl El Baúl is a playful storage chest designed by Javier Mariscal for Magis. The project reflects Mariscal's expressive and imaginat...

Brand: Magis Design: Ronan & Erwan Bouroullec Model: Workshop Officina is a chair designed by Ronan and Erwan Bouroullec for Magis, part of the Officina collection that celebrates t...

Product: Chaise Longue Model/Brand: Traffic Designer: Konstantin Grcic Product Type: Chaise Longue Description: The Traffic Chaise Longue by Konstantin Grcic combines sculptural ele...

Brand: Magis Design: Marcel Wanders Model: Cyborg Stick Cyborg Stick is an armchair designed by Marcel Wanders for Magis, part of the Cyborg collection that explores the dialogue be...

Brand: Magis Design: Jasper Morrison Model: Air-Chair Price refers to the purchase of four chairs. Air-Chair is a stackable chair designed by Jasper Morrison for Magis, appreciated...

Brand: Magis Design: Jasper Morrison Model: Motta Price refers to the purchase of two chairs. Motta is a chair designed by Jasper Morrison for Magis, characterized by its essential...

Brand: Magis Design: Konstantin Grcic Model: Chair One Chair One is a stackable chair designed by Konstantin Grcic for Magis, widely recognized as one of the most iconic examples of...

Brand: Magis Design: Ronan & Erwan Bouroullec Model: Stack Price refers to the purchase of two chairs. Pila is a stackable chair designed by Ronan and Erwan Bouroullec for Magis. T...

Brand: Magis Design: Marcel Wanders Model: Cyborg Lord Cyborg Lord is an armchair designed by Marcel Wanders for Magis, part of the Cyborg collection that explores the contrast betw...

MAGIS Lost - Table Lamp Design: BrogliatoTraverso The Lost Table Lamp combines modern elegance with a sculptural presence, making it a unique piece capable of enhancing any space. I...

Brand: Magis Design: Jasper Morrison Model: Motta Price refers to the purchase of two chairs. Motta is a chair designed by Jasper Morrison for Magis, defined by its essential struc...

Magis - RE Air-Chair Brand: Magis Design: Jasper Morrison Model: RE Air-Chair RE Air-Chair is a stackable chair designed by Jasper Morrison for Magis, developed as an environmental...