Hatchwell Antiques

A Dooling Brothers DeLuxe Mercury tether car, Los Angeles, California, circa 1939 – 40. With uprated glow plug engine. Rear wheel drive, known as “Dooling Rear Drive”. Replaced ha...

A late 19th century French oak hand cranked rise and fall articulating artist’s easel, circa 1890. Bronze cranking handle. Minimum height: 82 inches - 218 cm. Maximum height: 1...

A steam powered model of a WWI era Laforey-class destroyer, circa 1915. Live steam twin cylinder engine, with boiler, and geared propeller shaft. The Laforey class (re-designated...

A very good quality late 20th century brass hexagonal hall lantern with bevelled glass panels, in the Georgian style. With three internal bulb holders. (B14). With chain and ceilin...

A late 19th century oak and elm sailor's trunk used by a diver’s for storage of their suit and kit, with brass top and copper banding, top with badges of Siebe Gorman and C. E. Heink...

A board of coat hooks, Italian, circa 1950. Three brass coat and hat hooks. Oak backboard with enamel label of: MOBILI VACCHELLI SPEZIA – CARRARA

A set of six brass hat and coat hooks, French, circa 1910.

A twin 10 inch dial brass engine order telegraph by Bloctube Controls of Aylesbury of England, circa 1950. 10 inch white dials marked: ASTERN: FULL-HALF-SLOW-GEAR ENGAGED STOP AH...

A late 19th century scale model of a horse drawn single farrow turn-wrest plough. On an oak display board marked: A SURRIDGE LONDON

A four way railway signal lamp, black painted steel, with four 5 inch lenses. Folding carrying handle to top, the top unclips for access to the interior which would have contained a...

A large early 20th century pressure gauge with brass bezel by Dewrance of London. Dial marked: 0 – 200 pounds per square inch. 0-25-50-75-100-125-150-175-200 POUNDS PRESSURE PER □ ...

A wall mounted silk strength tester by Goodbrands & Co of Manchester and Stalybridge, circa 1910. Quadrant scale marked: 16 ozs. X ¼ oz. 4 lbs X 1 oz. (4/330) Vertical scale divide...

A mid 18th century Naval ship’s elm single pulley block, made in three parts – pulley, pin and shell. Height: 38 cm. Width: 30 cm. Depth: 15 c...

A brass fireplace companion set with a pair of fire dogs and hanging fire tools, English, circa 1900. Shovel, poker, tongs and brush.

An aluminium scale model of a Boeing 707 – 420, circa 1965. The Boeing 707 is a long-range, narrow-body airliner, the first jetliner developed and produced by Boeing Commercial Air...

A pair of BR(W) railway lights, by G. Polkey Ltd of Birmingham, circa 1950. With MOBILITE burner oil lamp. George Polkey Ltd of Pitsford St, Birmingham, Lamp Manufactures & Rail...

A model of a three mast sailing ship Golden Horizon, circa 1920. Copper sails and rigging, ebonized oak hull, masts, deck and fittings. Stand with brass name plate: GOLDEN HORIZON

A neo-classical brass oval table top dressing mirror, French, circa 1870. With easel stand. (Can be adapted for wall hanging). Bevelled mirror plate.

A 1950’s scale model of a Royal Air Force Hawker Hunter XF 418. 1/24 scale. In the livery of the RAF Black Arrows Base marked: HUNTER .F.Mk.6 (underside: 52/NIV/128←) Hawker Hun...

Brass scale model of a W. H. Porter & Co patent anchor, circa 1880. Porter & Co, Dunston Iron Works, near Newcastle-on-Tyne, and 149 Cheapside London.

A large certified precision ruled diffraction grating by Bausch & Lomb of Rochester, New York. 600 grooves / mm Blaze angle 28 degrees, 41 minutes. Radius concave Serial number: 88...

A 1950’s ship’s gimble mounted compass by C.M. Hammer, Gothenburg, of Sweden. Marked: C.M. HAMMAR GOTEBORG 3553 Compass card by Observator of Rotterdam. Pine case. Carl Mauritz...

11 inch brass scale model of a Byers of Sunderland Admiralty pattern stockless anchor, circa 1910. Made by W.L. Byers of Sunderland. Shank marked: W. L. BYERS & Co Ltd. SUNDERLAND ...

A pair of early 20th century floor standing brass candelabra. The tray and stem of each candelabra is decorated with leaves, triform base,...

An oak cased brass pantograph by Thomas Dunn of 50 North Hanover Street, Edinburgh. Circa 1845. Numbered: 402 Interior of the case has trade label: THOMAS DUNN, OPTICIAN, MATHEMATI...

Shipbuilder's model of the motor tanker VIBIT, made in 1963. 1 : 150 scale. Model made by: AB Sverre, Gothenburg, Sweden. The motor tanker Vibit was built by A/B Götaverken, Goth...

Carl Adami 13 inch terrestrial globe, by Dietrich Reimer, Berlin, Germany, 1900. “C. ADAMI’S ERDGLODUS neu bearbeitet und gezichnet von H. KIEPERT. Dietrich Reimer, Berlin. 1900 (E....

A steel and brass Louis XV style fireplace fender, French, circa 1920.

A late 19th century circular glazed brass hall lantern in the neo-classical style, English, circa 1900. Brass work decorated with Vitruvian scrolls and oak leaf motifs. Twin light ...

A 20 lbs Royal Navy mid 20th century non-magnetic bronze Admiralty pattern anchor by Wild, dated 1965. With broad-arrow and marked: LPHN Shackle linkage and removeable stock. ...

A late Georgian steel fireplace fender, with ornate bronze scrollwork decoration, removeable rests for fire irons, English, circa 1830.

An eight spoke bronze ship's wheel by, La Rochelle, France, circa 1880. Wall mounted rotating fixing allowing the wheel to return. Projection from wall: 3...

A set of three early 19th century steel fire irons, shovel, tongs, and poker, each with ornate brass handles with coronet finals and reticulated chased design.

A large 19th century cast iron door knocker in the form of a sea serpent by Archibald Kenrick & Sons, with matching stamped scallop shaped striking plate. Kenrick & Sons model no. 1...

A 1970's seven light "space age" chrome pendant light. With modern white glass globe shades. Re-wired and tested.

A six light crystal and beadwork cage chandelier. Height with out chain and rose: 31 inches. (79 cm). Height with chain and rose: 52 inches. (130 cm). Chain can be shorten as requ...

A 1920s ship's bell on a Art Deco bronze circular mount, for the steam ship PIAKO. Steam Merchant ship Piako, built in 1920 by A. Stephen & Sons Ltd, Linthouse, Glasgow, for New Ze...

A Salter's improved spring balance by George Salter & Co. To weight: 100 lbs. George Salter & Co.: Established in 1760 by Richard and William Salter, spring makers, began making ...

A French copper repoussé jardinière with Lion's head ring handles and paw feet.

A late 19th century brasswork repoussé planter with animal head ring handles and paw feet.

A Japanese portable ship's foghorn in original case. By the Tokyo Siren Co. Circa 1975. Type: SH-180 The foghorn is hand cranked, and is in full working order, emittin a loud ton...

A 1-30 scale model of a RAF Handley Page Victor V-Bomber. The Handley Page Victor is a British jet-powered strategic bomber, developed and produced by the ...

A pair of late 19th century bronze octagonal door centre pulls. With fixing bolts. Projection from door: 3 1/2 inches - 9 cm.

An Edwardian brass standard lamp, articulating arm, and rose and thistle finial, with a iron weighted hexagonal base. Re-wired and tested.

A cold war era Carl Zeiss Oberkochen 10 x 50 periscope binoculars, German, circa 1965. Specifications: 10 times magnification, coated optics, objective diameter 50 mm, grey filter and drop down grid. Original transport case. (included protective feet pads and rubber eye guards). Dimensions of the case: 29 x 18 1/2 x 11 inches. (73 x 47 x 28 cm). Mounted on an adjustable height tripod. Height of periscope in photographs: 77 inches. This model of Zeiss periscope...

Chadburn’s patent engine revolution counter,. Marked: ONE FOURTH SPEED OF TURBINE CHADBURN'S (SHIP) TELEGRAPH Co Ld - LIVERPOOL- · PATENT · 4296 Chadburn's (Ship) Telegrap...

A set of four late 19th century French graduated good quality copper cooking pans with riveted iron handles. retaining some of their original interi...

Copper coal bucket with lid with ornate brass handles and feet, by William Soutter & Sons of Birmingham, circa 1880. William Soutter & Sons Co., New Market St, Birmingham. Establis...

Bronze ship's steering helm with wheel by the Benson Electric Company, Superior, Wisconsin. Dated: JAN 1930 The helm indicates rudder angles with the moving pointer, lit with two ...

Review of the Fleet at Spithead by the Queen. 1878. The Naval Review at Spithead, the Royal yacht passing through the Lines. Illustration for: The Illustrated London News, 24th August 1878. By Josiah Robert Wells (1849-1897). Framed, coloured engraving. The Royal Yacht Victoria & Albert is sailing between lines of warships. A naval review requires a large, sheltered and deep anchorage, so in England it usually occurs in the Solent off Spithead. Queen Victoria and her daughter Princess Beatrice had embarked in the afternoon and were joined by Prince Arthur...

A 1950's model of a motor boat "Rainbow" with a 2 cc engine. Well built model with good scale details, brass window frames, lights, flag poles, decking, seating, interior table, pro...

A late 19th century cast iron oval hallway walking stick and umbrella stand. Six circular stick holders, with an ornate edge to drip tray and loop carrying handle. Base numbered 4.

A brass standard meter for the City of Exeter, with steel lifting handles. Marked: STANDARD METRE No: 11454 20ºC Made by Reverifications Ltd. of A...

A large scale brass door knocker with letterbox, in the form of a neo-classical portico, English, circa 1900. Letterbox flap inscribed LETTERS. (Flap aperture 129 x 27 mm). Modern ...

2 ¾ inch refractor telescope by François Can, 81 Quai de l'Hôpital, Lyon. Circa 1835. Mounted on a cast iron stand with adjustable height, folding tripod feet, and castors. 2 ¾ inc...

Large early 20th century brass door handles in the form of keys for the safemaker and locksmith Alexandre Fichet of Paris, circa 1900. Weight: 4.4 kilos. Alexandre Fichet, 1799...

A pair of high quality Victorian brass fire dogs.

A pair of 1920's large chrome photograph frames by Moseley. Velvet backed, with easel stand, and wall hanging rings. Marked: MOSELEYWARE ENGLAND

A late Victorian patinated cast iron standing bear money box, registered design by John Harper & Co. John Harper Co. Ironfounders, Albion Works, Willenhall, Staffordshire, England...

An ornate set of late 19th century brass and copper fire dogs and fire tools. Fire dogs: Height: 13 ½ inches - 34 cm. Fire tools: Length: 28 inches - 70 cm.