Side-Gallery Lighting

Sconce model "Butterfly" Italy, 1980s Manufactured by Flos Iron, Metal, Fabric, Glass  Measurements 47 x 20 x 53h cm 18,5 x 7,9 x 20,9h in Details Manufacturer’s stamp Literature...

Floor Lamp Model "Lyndon" Manufactured by O-Luce Italy, 1977 Stainless steel (AISI) and brass, clear glass diffusers Measurements 265h cm height 104,3h in height Details Manufacturer...

Ceiling Lamp L'impiccato Manufactured by Artemide Italy, 1978 Steel, Iron 220 cm length, adjustable height 88,6 in length, adjustable height

Table Lamp Model "Abat-Jour" by Gaetano Pesce Manufactured by Fish Design Italy, 1995 Cast Polyurethane over steel wire frame with three resin feet 30 cm diameter x 50h cm 11,8 in...

Paper bag lighting 9-2 From McDonald's Paper Bag Series manufactured by designer Ghuyan Lee. Korea, 2025 Recycled paper bag layered with Hanji, Steel and Electrical parts. Measurem...

Table Lamp model "Bali" Manufactured by Danese Milano Italy, 1964 Lacquered metal frame, Rice paper lampshade, Wood Measurements 40 cm diameter x 50h cm 15,8 in diameter x 19,7h in ...

Robert Mathieu (1921-2002) Floor lamp model 56 or “Pendulum” Manufactured by Arteluce France, 1952 Brass, fabric Measurements: 190 cm height 74.8 in height Biography R...

ADRIEN AUDOUX & FRIDA MINET Floor Lamp model “Tripode” Manufactured by Audoux-Minet France, 1950 Rope, fabric shades Measurements 180h cm 70,85h in Biography Union des Artistes Mo...

Sergio Rodrigues Floor Lamp "Augusto" Manufactured by OCA Brazil, 1965 Chrome-plated steel, Jacaranda, Fabric Measurements Ø46×147hcm Ø 18,1 x 57,9h in Literature Sergio Rodrigues,...

Gae Aulenti Table lamp model “Giova” Manufactured by Fontana Arte Italy, 1964 Blown glass Measurements: 32 Ø cm x 38 H cm. 13 Ø in x 15 H in. Provenance Private collec...

Floor lamp model “2093” Manufactured by Disderot France, 1970s Enamel, chrome plated steel Measurements 34,3 cm x 34,3 cm x 152,4h cm 13,5 in x 13,5 in x 60h in Literature Krzentow...

Table lamp model “524” Made in collaboration with Franca Helg Manufactured by Arteluce Italy, 1952 Openwork Perspex in a chrome frame Measurements 41 Ø cm x 47h cm. 16,14 Ø in x 18,5...

McDonald Paperbag Lighting 10-2 Manufactured by Gyuhan Lee. Korea, 2023. Paper, Steel and Electrical parts. Measurements 48 x 48 x 175h cm 18,9 x 18,9 x 68,9h in Exhibition: Des...

Lukas Saint-Joigny Lamp “Spring Dragon Mushroom” Manufactured by Produced in exclusive for SIDE GALLERY Paris, 2023 Polyurethane resin Measurements 26x35x70hcm 10,2 x 13,8 x 27,6h...

Floor Lamp “Super Litchi” Manufactured by Lukas Saint-Joigny Produced in exclusive for SIDE GALLERY Paris, 2023 Polyurethane resin Measurements : 35x35x195hcm 13,8 x 13,8 x 76,8h i...

Pair of wall lamps model “LP 11” Manufactured by Azucena Italy, 1959 Brass, frosted glass Measurements 45 cm diameter x 115 cm height 17,71 in diaemter x 45,27 in height Provenance P...

Ceiling Lamp 05 From the series ‘Soft Boxing’ Manufactured by Oliver Sundqvist & Frederik Nystrup-Larsen Copenhagen, 2022 Steel, coated acrylic knit, LED Measures: 46 cm ø x 170 H cm...

Ceiling lamp 04 From the series ‘Soft Boxing’ Manufactured by Oliver Sundqvist & Frederik Nystrup-Larsen Copenhagen, 2022 Steel, coated acrylic knit, LED Measures: 110 cm x 100 cm x ...

Ceiling Lamp 03 From the series ‘Soft Boxing’ Manufactured by Oliver Sundqvist & Frederik Nystrup-Larsen Copenhagen, 2022 Steel, coated acrylic knit, LED 110 cm x 90 cm x 140 h cm 43,3 in x 35,4 in x 55,1 h in Edition Unique piece Exhibitions Soft Boxing, 23rd February - 20th March 2023 Side Gallery, Barcelona, Spain Soft boxing by the Danish artistic duo Frederik Nystrup-Larsen & Oliver Sundqvist was exhibited at Side Gallery, Barcelona in February - March 2023, and acted as a continuation of their series rendered as a sculptural legacy of Tai Chi’s aesthetic movements. Ten new luminous sculptures composed of stainless steel structures, a relief of acrylic knit, and fluorescent LED...

Ceiling Lamp 02 From the series ‘Soft Boxing’ Manufactured by Oliver Sundqvist & Frederik Nystrup-Larsen Copenhagen, 2022 Steel, coated acrylic knit, LED Measures: 100 cm x 110 cm x ...

Ceiling lamp 01 From the series ‘Soft Boxing’ Manufactured by Oliver Sundqvist & Frederik Nystrup-Larsen Copenhagen, 2022 Steel, coated acrylic knit, LED Measures: 120 cm x 90 cm x 80 h cm 47,2 in x 35,4 in x 31,4h in Edition Unique piece Exhibitions Soft Boxing, 23rd February - 20th March 2023 Side Gallery, Barcelona, Spain Soft boxing by the Danish artistic duo Frederik Nystrup-Larsen & Oliver Sundqvist was exhibited at Side Gallery, Barcelona in February - March 2023, and acted as a continuation of their series rendered as a sculptural legacy of Tai Chi’s aesthetic movements. Ten new luminous sculptures composed of stainless steel structures, a relief of acrylic knit, and fluorescent LED...

Floor Lamp 04 From the series ‘Soft Boxing’ Manufactured by Oliver Sundqvist & Frederik Nystrup-Larsen Copenhagen, 2022 Steel, coated acrylic knit, LED Dimensions: 200 cm x 110 cm x 105 h cm 78,7 in x 43,3 in x 41,3 h inches Edition Unique piece Exhibitions Soft Boxing, 23rd February - 20th March 2023  Soft boxing by the Danish artistic duo Frederik Nystrup-Larsen & Oliver Sundqvist was exhibited at Side Gallery, Barcelona in February - March 2023, and acted as a continuation of their series rendered as a sculptural legacy of Tai Chi’s aesthetic movements. Ten new luminous sculptures composed of stainless steel structures, a relief of acrylic knit, and fluorescent LED...

Floor lamp 03 From the series ‘Soft Boxing’ Manufactured by Oliver Sundqvist & Frederik Nystrup-Larsen Copenhagen, 2022 Steel, coated acrylic knit, LED Measures: 70 cm x 70 cm x 66 h cm 27,5 in x 27,5 in x 25,9 h in Edition Unique piece Exhibitions Soft Boxing, 23rd February - 20th March 2023 Side Gallery, Barcelona, Spain Soft boxing by the Danish artistic duo Frederik Nystrup-Larsen & Oliver Sundqvist was exhibited at Side Gallery, Barcelona in February - March 2023, and acted as a continuation of their series rendered as a sculptural legacy of Tai Chi’s aesthetic movements. Ten new luminous sculptures composed of stainless steel structures, a relief of acrylic knit, and fluorescent LED...

Floor lamp 02 From the series ‘Soft Boxing’ Manufactured by Oliver Sundqvist & Frederik Nystrup-Larsen Copenhagen, 2022 Steel, coated acrylic knit, LED Measures: 110 cm x 80 cm x 200 h cm 43,3 in x 31,4 in x 78,7 h in Edition Unique piece Exhibitions Soft Boxing, 23rd February - 20th March 2023 Side Gallery, Barcelona, Spain Soft boxing by the Danish artistic duo Frederik Nystrup-Larsen & Oliver Sundqvist was exhibited at Side Gallery, Barcelona in February - March 2023, and acted as a continuation of their series rendered as a sculptural legacy of Tai Chi’s aesthetic movements. Ten new luminous sculptures composed of stainless steel structures, a relief of acrylic knit, and fluorescent LED...

Floor lamp 01 From the series “Soft Boxing series II” Manufactured by Oliver Sundqvist & Frederik Nystrup-Larsen Copenhagen, 2022 Steel, coated acrylic knit, LED 138 cm x 130 cm x 140 h cm 54,3 in x 40,5 in x 55,1 h in Edition Unique piece Exhibitions Soft Boxing, 23rd February - 20th March 2023 Side Gallery, Barcelona, Spain Soft boxing by the Danish artistic duo Frederik Nystrup-Larsen & Oliver Sundqvist was exhibited at Side Gallery, Barcelona in February - March 2023, and acted as a continuation of their series rendered as a sculptural legacy of Tai Chi’s aesthetic movements. Ten new luminous sculptures composed of stainless steel structures, a relief of acrylic knit, and fluorescent LED...

Willem van Hooff Ceiling lamp From the series "Dual Lamps" Manufactured by Willem van Hooff Holland, 2021 Air dry clay, epoxy clay Measurements 48 cm diameter x 41 cm height 18,9 in diameter x 16,14 in height Edition Unique Piece Created exclusively for Side Gallery, during the existence of the COVID 19, Willem desired to design something new, something physical, far away from our intense digital backdrop of the previous twelve months. His process began with an experimentation of Industrial epoxy clay, using the same spontaneous architectural techniques as his vases, he began applying multiple layers of differing shades of clay. Initially the layering of clay was just for strength, but the process became aesthetic. Once the clay dried, Van Hooff began sanding the clay, when a pattern began to form, an uncontrolled organic print casing the surface of the lamps as the layers of clay began to reveal themselves, creating a naturally textured design. Willem van Hooff (b. 1992,Holland) sees himself as a 2021 variant of the former craftsman. After graduating from the Design Academy in Eindhoven in 2018, he began to run his own design studio continuing to live and work in Eindhoven. Working with his hands, or by means of Primitive techniques his style is raw. Often revisiting old or existing products, machines and techniques with a naive perspective, he rescues the past, creating new and exciting applications giving the materials or processes a new future. At odds with the apparent perfection of mass production, Van Hooff concludes that products no longer have a soul, an aspect to his work he perceives as essential. Amid the current corona virus...

Table lamp model “Epilith V” From “Epilith Lamps” series Manufactured by Elissa Lacoste France, 2021 Recycled cast aluminum (oxidized), Acrylic One resin, pigments, mineral aggre...

Table lamp model “Epilith II” From “Epilith Lamps” series Manufactured by Elissa Lacoste France, 2021 Recycled cast aluminum, Acrylic One resin, pigments, mineral aggregates, silicon...

Wall Light From the series "Epilith lamps" Manufactured by Elissa Lacoste France, 2022 Steel, acrylic resin, fiberglass, mineral aggregates, pigment, silicone, electrical com...

Hanging chandelier model “Verdigris” From the series “Epilith Lamps” Manufactured by Elissa Lacoste France, 2022 Recycled aluminum, acrylic resin, pigment, marble and quartz powder,...

Chandelier model “Tillandsia” From the series "Epilith Lamps" Manufactured by Elissa Lacoste France, 2022 Recycled aluminum, silicone, pigment, electrical components. Led 5 x...

Hanging lamp model “Ultramarine violet” From the series “Epilith lamps” Manufactured by Elissa Lacoste France, 2022 Recycled aluminum, acrylic resin, pigment, marble quartz...

Table lamp model “Bauxite” From the series “Epilith Lamps” Manufactured by Elissa Lacoste France, 2022 Recycled cast aluminum, Acrylic resin, pigment, mineral aggregates, sili...

Table lamp model “Heliotrope” From the series “Epilith Lamps” Manufactured by Elissa Lacoste France, 2022 Recycled cast aluminum, Acrylic resin, pigment, mineral aggregates, s...

Table lamp model “Tephrite” From the series “Epilith Lamps” Manufactured by Elissa Lacoste France, 2022 Recycled cast aluminum, Acrylic resin, pigment, mineral aggregates, sil...

Table lamp model “Amanite” From the series “Epilith Lamps” Manufactured by Elissa Lacoste France, 2022 Recycled cast aluminum, Acrylic resin, pigment, mineral aggregates, sili...

Floor lamp model “Rose Calcite” From the series “Epilith Lamps” Manufactured by Elissa Lacoste France, 2022 Recycled cast aluminum, Acrylic resin, pigment, mineral aggregates,...

Table lamp model “Amethyst” From the series “Epilith Lamps” Manufactured by Elissa Lacoste France, 2022 Recycled cast aluminum, Acrylic resin, pigment, mineral aggregates, sil...

Table lamp model “Marigold” From the series “Epilith Lamps” Manufactured by Elissa Lacoste France, 2022 Recycled cast aluminum, Acrylic resin, pigment, mineral aggregates, sil...

Table lamp model “Agate” From the series “Epilith Lamps” Manufactured by Elissa Lacoste France, 2022 Recycled cast aluminum, Acrylic resin, pigment, mineral aggregates, silic...

Table lamp model “Epilith V” From “Epilith Lamps” series Manufactured by Elissa Lacoste France, 2021 Recycled cast aluminum (oxidized), Acrylic One resin, pigments, mineral aggregate...

Floor lamp model “Totem” Manufactured by Sabine Marcelis Produced in exclusive for SIDE GALLERY Rotterdam, The Netherlands 2021 Resin, Neon (+transformer) Measurements 18 cm x 17 cm x 170h cm 7,08 in x 6,69 in x 66,92h in Edition Limited edition of 12 + 2AP Since graduating, she has been operating Studio Sabine Marcelis, working within the fields of product, installation and spatial design with a strong focus on materiality. Her work is characterized by pure forms and natural elements such as the reflections of light and water, which she believes highlight material properties. Growing up in New Zealand Sabine was surrounded by dramatic landscapes, always sensitive to the light of the sky, the ocean and the snow on the mountains, the artist was inspired by the communication of the natural elements. Her work captures these beautiful moments in nature on a smaller scale, as objects or installations. Over the last decade, the award-winning designer has become known for her work with resin and glass. Her receptiveness for these two materials is due to their manipulability; sharp angular shapes as well as spineless curves can be protracted giving the artist endless scope for form. Moreover, the translucency of the both materials can be adjusted from sheer transparency to milky or solid opaque finishes. Working in collaboration with industry specialists, Marcelis intervenes in the manufacturing processes using material research and experimentation to achieve new and surprising visual effects, applying a strong aesthetic point of you to the material development processes. The series Candy Cubes is an example of the designer’s complex material investigation; a polyester resin mold is used to cast the piece, followed by an intensive polishing process. The cast resin is light sensitive, as sun rays shine down onto the solid blocks, the light illuminates the edges, sugar coating the sides, making the aptly named “marshmallow” colored candy cube appear edible. As well as playing with natural light, Marcelis also experiments with artificial lighting in her work. The introduction of neon light to her material combinations expresses the relationship between light, color and transparency in a more constant context. In 2015 Marcelis produced the series Dawn Light whereby the introduction of a white neon tube to a series of different geometric resin objects was used to reflect a unique moment in nature; when the sun, clouds and sky all join together, creating a momentary riot of hues. The series was on show at the Museum Boijmans Van Beuningen in Holland. Since then Marcelis has continued to work with neon and resin developing complex colour recipes and finishes, resulting in her Totem Series commissioned and sold exclusively by Side Gallery in 2019. The collection is composed of four different sized lighting elements, two table and two standing lamps. The Totems are built with several stacked translucent resin volumes which are slightly rotated on a central axis. The carved-out void where the neon light is inserted allows for a multifaceted play between the twisted planes of polished resin and light reflections. Every angle of the lights is a unique visual experience. As well as designing object pieces, the Dutch designer has a series of impressive installation projects associated with her profile including, the Aesop Vedovelle Fountain, the Dutch Pavilion at Cannes Film festival 2017, a Light installation at Biennale Interieur 2018, The Solo Sun Dial project 2018, Burberry x OC in 2018 and De/Coding ‘Alcantara in the tapestry Rooms’ in 2019. Perhaps her most famous installation was her Shapes of Water or Fendi Fountains installation, first exhibited at Design Miami 2018. The ten water sculptures designed from cast resin were a continuation of Marcelis experience and experimentation in material practices, projecting her own vision her elegant avant-garde creativity corresponded directly with the Fendi philosophy. The designers most prestigious exhibition yet, was her museum show “NO FEAR OF GLASS” in December 2019. The intervention commissioned by Side Gallery in collaboration with the Mies Van de Rohe Foundation, consisted of five original works by the Dutch designer, meticulously placed within the Pavilion. The five pieces were designed to extrude from the architecture itself; two large chaise lounges...

Table lamp model “Totem” Manufactured by Sabine Marcelis Produced in exclusive for SIDE GALLERY Rotterdam, The Netherlands 2021 Resin, Neon (+transformer) Measurements 30 cm x 17 cm x 60 H cm 11,81 in x 6,69 in x 23,62 H in Edition Limited edition of 12 + 2AP Sabine Marcelis (b.1985 New Zealand) is a designer living and working in Rotterdam, The Netherlands. Raised in New Zealand, she was recognized from a young age for her design abilities, being awarded the New Zealand Young Designer of the Year. Marcelis studied industrial design for two years at Victoria University in Wellington, and continued her studies at the Design Academy Eindhoven, where she graduated in 2011. When graduating the designer was nominated for a fleet of prestigious design grants, such as the ‘Unge Talenter Designpriser’ by the Norsk Designråd, the René Smeets Award, and the Keep an Eye Grant. Since graduating, she has been operating Studio Sabine Marcelis, working within the fields of product, installation and spatial design with a strong focus on materiality. Her work is characterized by pure forms and natural elements such as the reflections of light and water, which she believes highlight material properties. Growing up in New Zealand Sabine was surrounded by dramatic landscapes, always sensitive to the light of the sky, the ocean and the snow on the mountains, the artist was inspired by the communication of the natural elements. Her work captures these beautiful moments in nature on a smaller scale, as objects or installations. Over the last decade, the award-winning designer has become known for her work with resin and glass. Her receptiveness for these two materials is due to their manipulability; sharp angular shapes as well as spineless curves can be protracted giving the artist endless scope for form. Moreover, the translucency of the both materials can be adjusted from sheer transparency to milky or solid opaque finishes. Working in collaboration with industry specialists, Marcelis intervenes in the manufacturing processes using material research and experimentation to achieve new and surprising visual effects, applying a strong aesthetic point of you to the material development processes. The series Candy Cubes is an example of the designer’s complex material investigation; a polyester resin mold is used to cast the piece, followed by an intensive polishing process. The cast resin is light sensitive, as sun rays shine down onto the solid blocks, the light illuminates the edges, sugar coating the sides, making the aptly named “marshmallow” colored candy cube appear edible. As well as playing with natural light, Marcelis also experiments with artificial lighting in her work. The introduction of neon light to her material combinations expresses the relationship between light, color and transparency in a more constant context. In 2015 Marcelis produced the series Dawn Light whereby the introduction of a white neon tube to a series of different geometric resin objects was used to reflect a unique moment in nature; when the sun, clouds and sky all join together, creating a momentary riot of hues. The series was on show at the Museum Boijmans Van Beuningen in Holland. Since then Marcelis has continued to work with neon and resin developing complex colour recipes and finishes, resulting in her Totem Series commissioned and sold exclusively by Side Gallery in 2019. The collection is composed of four different sized lighting elements, two table and two standing lamps. The Totems are built with several stacked translucent resin volumes which are slightly rotated on a central axis. The carved-out void where the neon light is inserted allows for a multifaceted play between the twisted planes of polished resin and light reflections. Every angle of the lights is a unique visual experience. As well as designing object pieces, the Dutch designer has a series of impressive installation projects associated with her profile including, the Aesop Vedovelle Fountain, the Dutch Pavilion at Cannes Film festival 2017, a Light installation at Biennale Interieur 2018, The Solo Sun Dial project 2018, Burberry x OC in 2018 and De/Coding ‘Alcantara in the tapestry Rooms’ in 2019. Perhaps her most famous installation was her Shapes of Water or Fendi Fountains installation, first exhibited at Design Miami 2018. The ten water sculptures designed from cast resin were a continuation of Marcelis experience and experimentation in material practices, projecting her own vision her elegant avant-garde creativity corresponded directly with the Fendi philosophy. The designers most prestigious exhibition yet, was her museum show “NO FEAR OF GLASS” in December 2019. The intervention commissioned by Side Gallery in collaboration with the Mies Van de Rohe Foundation, consisted of five original works by the Dutch designer, meticulously placed within the Pavilion. The five pieces were designed to extrude from the architecture itself; two large chaise lounges...

Table lamp model “Totem” Manufactured by Sabine Marcelis Produced in exclusive for SIDE GALLERY Rotterdam, The Netherlands 2018 Resin, Neon (+transformer) Measurements 30 cm ...

Lamp From the series “Concept Kitchen” Produced in exclusive for SIDE GALLERY Manufactured by Bagnara Italy, 2020 Apls Glitter marble Measurements 30 cm x 30 cm x 180h cm 1...

Floor lamp From the series "Urben Stem" Manufactured by Rollo Bryant Engineer Patou Morrow Produced for Side Gallery Eindhoven (The Netherlands), 2021 PLA (polymer), PVA (polyvinyl), Silver Sand, P.T.B Pigment, Acrylic Glass, Aluminium E27 Dragon Light...

Table lamp model “Epilith V” From “Epilith Lamps” series Manufactured by Elissa Lacoste France, 2021 Recycled cast aluminum (oxidized), Acrylic One resin, pigments, mineral aggreg...

Table lamp model “Epilith IV” From “Epilith Lamps” series Manufactured by Elissa Lacoste France, 2021 Recycled cast aluminum, Acrylic One resin, pigments, mineral aggregates, ...

Table lamp model “Epilith III” From “Epilith Lamps” series Manufactured by Elissa Lacoste France, 2021 Recycled cast aluminum, Acrylic One resin, pigments, mineral aggregates, sil...

Table lamp model “Epilith II” From “Epilith Lamps” series Manufactured by Elissa Lacoste France, 2021 Recycled cast aluminum, Acrylic One resin, pigments, mineral aggregates, sili...

Sam Chermayeff Standing lamp From the series “Beasts” Produced in exclusive for SIDE GALLERY Manufactured by Sam Chermayeff Berlin, 2021 Steel, mirror, upholstery Contemporary Design Measurements 40 cm x 30 cm x 190h cm (90 cm...

Chan Chiao Chun Table lamp model "Good morning" From the series "Stay with me" Manufactured by Chan Chiao Chun Produced in exclusive for Side Gallery Eidhoven, The Netherlands,...

Chan Chiao Chun Table lamp model "Everything will be fine" From the series "Stay with me" Manufactured by Chan Chiao Chun Produced in exclusive for Side Gallery Eidhoven, The N...

Chan Chiao Chun Table lamp model "I will give you everything I have" From the series "Stay with me" Manufactured by Chan Chiao Chun Produced in exclusive for Side Gallery Eidhov...

Chan Chiao Chun Table lamp model "Stay with me" From the series "Stay with me" Manufactured by Chan Chiao Chun Produced in exclusive for Side Gallery Eidhoven, The Netherlands, ...

Chan Chiao Chun Chandelier model "I am braver with you" From the series "Stay with me" Manufactured by Chan Chiao Chun Produced in exclusive for Side Gallery Eidhoven, The Nethe...

Sabine Marcelis Floor lamp model “Totem” Manufactured by Sabine Marcelis Produced in exclusive for SIDE GALLERY Rotterdam, The Netherlands 2018 Resin, Neon (+transformer) Measurements: 18 cm x 17 cm x 170 H cm 7.08 in x 6.69 in x 66.92 H in Edition Limited edition of 12 + 2AP Sabine Marcelis (b.1985 New Zealand) is a designer living and working in Rotterdam, The Netherlands. Raised in New Zealand, she was recognized from a young age for her design abilities, being awarded the New Zealand Young Designer of the Year. Marcelis studied industrial design for two years at Victoria University in Wellington, and continued her studies at the Design Academy Eindhoven, where she graduated in 2011. When graduating the designer was nominated for a fleet of prestigious design grants, such as the ‘Unge Talenter Designpriser’ by the Norsk Designråd, the René Smeets Award, and the Keep an Eye Grant. Since graduating, she has been operating Studio Sabine Marcelis, working within the fields of product, installation and spatial design with a strong focus on materiality. Her work is characterized by pure forms and natural elements such as the reflections of light and water, which she believes highlight material properties. Growing up in New Zealand Sabine was surrounded by dramatic landscapes, always sensitive to the light of the sky, the ocean and the snow on the mountains, the artist was inspired by the communication of the natural elements. Her work captures these beautiful moments in nature on a smaller scale, as objects or installations. Over the last decade, the award-winning designer has become known for her work with resin and glass. Her receptiveness for these two materials is due to their manipulability; sharp angular shapes as well as spineless curves can be protracted giving the artist endless scope for form. Moreover, the translucency of the both materials can be adjusted from sheer transparency to milky or solid opaque finishes. Working in collaboration with industry specialists, Marcelis intervenes in the manufacturing processes using material research and experimentation to achieve new and surprising visual effects, applying a strong aesthetic point of you to the material development processes. The series Candy Cubes is an example of the designer’s complex material investigation; a polyester resin mold is used to cast the piece, followed by an intensive polishing process. The cast resin is light sensitive, as sun rays shine down onto the solid blocks, the light illuminates the edges, sugar coating the sides, making the aptly named “marshmallow” colored candy cube appear edible. As well as playing with natural light, Marcelis also experiments with artificial lighting in her work. The introduction of neon light to her material combinations expresses the relationship between light, color and transparency in a more constant context. In 2015 Marcelis produced the series Dawn Light whereby the introduction of a white neon tube to a series of different geometric resin objects was used to reflect a unique moment in nature; when the sun, clouds and sky all join together, creating a momentary riot of hues. The series was on show at the Museum Boijmans Van Beuningen in Holland. Since then Marcelis has continued to work with neon and resin developing complex colour recipes and finishes, resulting in her Totem Series commissioned and sold exclusively by Side Gallery in 2019. The collection is composed of four different sized lighting elements, two table and two standing lamps. The Totems are built with several stacked translucent resin...

Sabine Marcelis Floor lamps model “Totem” Manufactured by Sabine Marcelis Produced in exclusive for Side Gallery Rotterdam, The Netherlands, 2018 Resin, Neon (+transformer) Measure...

Sabine Marcelis Floor lamp model “TOTEM” Manufactured by Sabine Marcelis Produced in exclusive for Side Gallery Rotterdam, The Netherlands 2018 Resin, Neon (+transformer). Measurem...

Sabine Marcelis Floor lamp model “TOTEM” Manufactured by Sabine Marcelis Produced in exclusive for Side Gallary Rotterdam, The Netherlands 2018 Resin, Neon (+transformer). Contemporary design Meassurements 18 cm x 17 cm x 190 H cm 7.08 in x 6.69 in x 74 H in Edition Limited edition of 12 + 2AP. Sabine Marcelis (b.1985 New Zealand) is a designer living and working in Rotterdam, The Netherlands. Raised in New Zealand, she was recognized from a young age for her design abilities, being awarded the New Zealand Young Designer of the Year. Marcelis studied industrial design for two years at Victoria University in Wellington, and continued her studies at the Design Academy Eindhoven, where she graduated in 2011. When graduating the designer was nominated for a fleet of prestigious design grants, such as the ‘Unge Talenter Designpriser’ by the Norsk Designråd, the René Smeets Award, and the Keep an Eye Grant. Since graduating, she has been operating Studio Sabine Marcelis, working within the fields of product, installation and spatial design with a strong focus on materiality. Her work is characterized by pure forms and natural elements such as the reflections of light and water, which she believes highlight material properties. Growing up in New Zealand Sabine was surrounded by dramatic landscapes, always sensitive to the light of the sky, the ocean and the snow on the mountains, the artist was inspired by the communication of the natural elements. Her work captures these beautiful moments in nature on a smaller scale, as objects or installations. Over the last decade, the award-winning designer has become known for her work with resin and glass. Her receptiveness for these two materials is due to their manipulability; sharp angular shapes as well as spineless curves can be protracted giving the artist endless scope for form. Moreover, the translucency of the both materials can be adjusted from sheer transparency to milky or solid opaque finishes. Working in collaboration with industry specialists, Marcelis intervenes in the manufacturing processes using material research and experimentation to achieve new and surprising visual effects, applying a strong aesthetic point of you to the material development processes. The series Candy Cubes is an example of the designer’s complex material investigation; a polyester resin mold is used to cast the piece, followed by an intensive polishing process. The cast resin is light sensitive, as sun rays shine down onto the solid blocks, the light illuminates the edges, sugar coating the sides, making the aptly named “marshmallow” colored candy cube appear edible. As well as playing with natural light, Marcelis also experiments with artificial lighting in her work. The introduction of neon light to her material combinations expresses the relationship between light, color and transparency in a more constant context. In 2015 Marcelis produced the series Dawn Light whereby the introduction of a white neon tube to a series of different geometric resin objects was used to reflect a unique moment in nature; when the sun, clouds and sky all join together, creating a momentary riot of hues. The series was on show at the Museum Boijmans Van Beuningen in Holland. Since then Marcelis has continued to work with neon and resin developing complex colour recipes and finishes, resulting in her Totem Series commissioned and sold exclusively by Side Gallery in 2019. The collection is composed of four different sized lighting elements, two table and two standing lamps. The Totems are built with several stacked translucent resin...