Dutch Center Tables

“LOCK” sculptural bamboo dining table is designed out of the qualities, possibilities and characteristics of its material: bamboo.  The frame is build up from pressed layers of flexible bamboo. The shape is formed by the bamboo’s natural bending curve. The layers of bamboo curve through each other and entwine, locking each other in place. Two different color-tones are used: natural and caramel bamboo. This “layer cake”enhances the curves ,flow and shape of the table. End result is a mix of nature and mathematics, of possible and impossible. A strong dynamic shape that looks different watched from different viewing points...

Mid-Century Brutalist stone topped coffee or side table with Wenge frame, lower shelf and asymmetrical legs. Earth toned slate tiles inset into frame w...

Heavy low-profile coffee table constructed from reclaimed railroad tie oak beams, designed in the style of Pierre Chapo's Brutalist furniture approach. The top surface is composed of...

Attractive and heavy! This two-tone wood table has a round mid-toned veneer top with beautiful inset tree trunk center design and solid tapered compass legs, adding extra visual inte...

This beautiful renaissance table is made in the finest quality solid European summer oak in the Netherlands around 1680 It is a typical dutch renaissance table (so called bolpoottafe...

Stunning and rare Art Deco Amsterdamse School center table. Striking Dutch design from the 1920s. Solid oak well designed base with original solid oak top. This wonderful Art Deco...

Rectangular assembled schist table with rounded corners and brass inlay, very rare octagonal legs, signed on the top H: 47 cm Top: 80 x 120 cm. Paul KINGMA (1931 - 2013) Dutch s...

Continental (Possibly Dutch) (19th Century) mahogany flame veneer round tilt-top table with a center floral marquetry inlaid medallion supported on a tripartite base with scalloped l...

Very nice ''so called'' smoking Table. Oak Wood base, comes with a Brass top engraved with Arabic motifs. 1930s.

Early 19th Century Dutch Marquetry Writing Table with Inlay. Stunning example of marquetry craftsmanship with turned legs and inlay on the stretchers. Desk has a single drawer.

The Color Dial Curved table features a fully transparent glass top with bespoke curved legs that are attached to the top. The table is a sculptural feature ...

Lovely, Paolo Piva and Ettore Sottsass inspired, Memphis style, Italian, 1980's coffee table. Table has a geometric, architectural, black enameled metal frame which consists of four...

19th Century Charles X grey marble top table A mahogany tripod table with scroll ornaments end of the feet and a beautiful colored grey marble top A 19th Century Dutch mahogany table...

Beautiful Art Deco cocktail table. Burl wood veneered top laid in a radiating pattern. High on his elegant legs. Lovely color.

Italian black lacquered wood coffee table with inset glass and black painted steel legs. Inside display compartment under glass. In original condition with some wear to frame and lig...

eometric Memphis-influenced table featuring a sculptural base of interlocking triangular and V-shaped wood forms. The base alternates between natural light wood and black-lacquered w...

A wonderfully aged 18th Century Dutch tilt table. Circa 1850.

Designed by Dutch designer Ate Van Apeldoorn, this waterfall table is constructed entirely of solid pine, with the top surface flowing continuously into two vertical slab sides. Visi...

This exquisite mahogany and fruitwood marquetry centre table offers a sophisticated presence for any upscale home. The circular top over a conforming inlaid frieze with an overall ma...

In this listing you will find a striking large Brutalist coffee table designed in style of Pierre Chapo. Table is done in solid oak, which makes it extremely heavy. Made in the Nethe...

The SOAP Table is now a contemporary design classic. Dutch-Kiwi designer Sabine Marcelis works at the forefront of contemporary material innovation , and the SOAP series sits at the...

The SOAP Table is now a contemporary design classic. Dutch-Kiwi designer Sabine Marcelis works at the forefront of contemporary material innovation , and the SOAP series sits at the...

The small Dutch Baroque draw-leaf or center table with a two-board framed top having conforming extension leaves on each end, above a plain frieze, supported by massive plaint turned...

Sophisticated Dutch coffee table with brass frame, with glass plates and with Obelisk shaped Lucite legs. This light and glossy square table with beautiful brass accents has two-tier...

Dutch extension table of typical form. The top and each of the extension leaves feature an inlaid star in the center and linear inlay around the edge, conf...

This beautiful table with its heavy plank top and architectural trestle legs is a reference to historic European farm and monastery tables. Crafted from solid oak wood with a richly...

A large center table with bended top in oak hand finished to fit the shape. The base is made from hazel branches coated with coal that has been rein...

These vibrant tables are from Maarten Baas’s iconic ‘Clay’ collection launched in 2006. The idiosyncratic childishness of this collection is created through Baas’s individual hand mo...

Castellary round table by Frederik Smits Handmade by the artist Edition of 15 pieces Lacquered metal and wood.  

A 19th Century mahogany table with a cartouche-shaped marble top, ca 1840 A beautiful Dutch mahogany table with a four-legged cabriole shaped with Acanthus leaf table...

Round table featuring a thick white laminate top with a black-stained edge and a distinctive tripod criss-cross base. Three cylindrical black lacquered legs intersect at the center, ...

Ridiculous - ONE is part of the ONE series ONE is a single sheet of metal. From its flat shape as a sheet it is forged and bended into the third dimension. This movement is visible in its shape. It shows the strength of the steel and combines old forging techniques with modern design. It is designed to have a sculptural quality. To be the simplest thing but have the strongest presence. A brutal elegancy. Ridiculous - ONE comes in two different finishes. All finishes are conserved by a strong varnish. Designer Description: Frank Penders...

Dutch (19th century) mahogany flame veneer round tilt-top table with a center floral marquetry inlaid medallion supported on a tripartite base with scalloped legs.        

This exceptional center table was produced in the Netherlands during the 1920s, most likely by the company H.P. Mutters & Zoon in The Hague, with the design attributed to Carel Adolp...

Ridiculous - ONE is part of the ONE series ONE is a single sheet of metal. From its flat shape as a sheet it is forged and bended into the third dimension. This movement is visible ...

Magnificent and ultra rare Black Forest center table. Design by Matthijs Horrix for the famous Dutch cabinet makers Horrix Den Haag. Striking Dutch design from the 1880s. Solid hand-carved walnut base with original hand-carved and inlaid top. This wonderful Black Forest center table by Matthijs Horrix for Horrix Den Haag is in very good original condition with minor wear consistent with age and use, preserving a beautiful patina. The Horrix company was established in Den Haag or The Hague and gained fame during the so-called eclectic period during the 19th Century. Their work was inspired by older styles of furniture but with fashionable features that was then...

Stunning and elegant Victorian center table. Striking Dutch design from the 1880s. Solid walnut base with original walnut veneered top. The Dutch name for this table is Spinnekop taf...

A striking example of Brutalist design, this Mid-Century coffee or side table is deeply inspired by the work of American designer Paul Evans. Its bold, sculptural base evokes the tex...

Bas van Pelt for E.M.S. Overschie, coffee table, lacquered steel, sisal, The Netherlands, 1930s. This octagonal shaped coffee table is made by the Dutch interior and furniture designer Bas van Pelt (1900-1945), and manufactured by E.M.S. Overschie. The construction is made in tubular steel with white lacquer finish. The curved ends meet each other in the middle, creating a cross shape which is the defining element. The table top is covered with coarsely woven fabric ‘sisal’. Bastiaan Johannes van Pelt (1900-1945) was a Dutch furniture designer and interior designer. As son of a book printer, he spend his time after school working in several printing companies in Holland. At that time he already engaged in topics like designing furniture, interiors, carpets and fabrics, graphic work and pottery. In 1927, he quit his old job and started to work at a furniture factory owned by his father-in-law J.C. Jansen in Overschie. Together with his brother-in-law, Jan Jansen...

Mid-Century Modern rectangle teak coffee table on chrome cylinder legs with solid teak cone shape leg tips. Made in Holland.

A coffee table that showcases the sculptural beauty characteristic of the prestigious Dutch furniture manufacturer, Fristho Franeker. The eye is drawn to the aesthetic form of the or...

18th century Dutch center table ~ library table reflects generations of traditional woodcraft for which the Dutch have been famous for many centuries! This example features a typical...

Continental Dutch (18/19th Century) oval satinwood and rosewood inlaid 4 legged center table with gallery and inlaid medallion center.

One of a kind. No reproduction. The Tavolo in Metamorfosi is a coffee table which consists of a top of triangles with a specially processed glass plate on top. If you look over the t...

Dutch 17th Century Painted Large Oval Gate-Leg Dining Table. A charming Dutch painted Gate-Leg Table in original condition. The painted surfaces beautifully worn, the top with typica...

This vintage solid beech slab has been reclaimed from a rustic coffee table from the 1960s The wood slab has been sandblasted and heat treated first in a 120 degrees celsius oven ...

CNSTR table V.1 by Paul Heijnen Dimensions: H 78 x L 220 x W 95 cm Materials: Tempered glass, coated steel Also available, TECH CNSTR table and CNSTR table V.2, Each tabletop is...

AN UNUSUAL, FLEMISH, BAROQUE, OAK, SPLIT, GATELEG, OVAL TABLE WITH ORIGINAL IRONWORK & SINGLE DRAWER, 5ft - The turnings are architecturally inspired and the split leg creates a par...

18th Century Dutch End Table ~ Center Table is a testament to the artisans of a bygone era! Utilizing indigenous old-growth oak, the craftsmen created this beauty from solid planks ...

The side table which consists of a top of triangles. If you look over the table on the short sides, you will see a braided pattern. The design is inspired by Escher's patterns. This ...

The Tavolo in Metamorfosi is a coffee table which consists of a top of triangles with a specially processed glass plate on top. If you look over the table on the short sides, you wil...

Gorgeous coffee table designed by Rudolf Bernd Glatzel for Fristho, the Netherlands in the 1960s. The rectangular top is made with teak and rosewood veneer slats, in wonderful differ...

One of a kind. No reproduction. The Tavolo in Metamorfosi is a coffee table which consists of a top of triangles with a specially processed glass plate on top. If you look over the t...

Gorgeous original oakwood coffee table or side table with beautiful symmetric veneer inlay. Unique and beautiful craftsmanship, one of a kind. Found in an old house in the Netherland...

Continental Dutch Arts & Crafts walnut and oak rectangular center table with banded inlaid trim and a bottom shelf over 2 doors with diamond design rest...

Tech Cnstr table by Paul Heijnen (2013) Dimensions: H78 x L140 x W140 cm Materials: Coated Birch Also Available, Three legged version possible (octagonal/circular top) *please...

Antithesis table by Onno Adriaanse, 2022 Edition: limited edition of 8. Dimensions: H 90 x W 160 x D 75 cm Materials: brass, float glass, steel, foam...

Sabine Marcelis Freestanding table in Mint From the series “Candy Cubes” Manufactured by Sabine Marcelis Produced for Side Gallery Rotterdam, The Netherlands 2017 High polished sing...

Beautiful contemporary 'Alta Ara' dining table. Designed by Bas Merckx This table is equipped with ten feet in a satin finished brass. The top is made from a mat ceramic ...

Cnstr table V.2 by Paul Heijnen (2014) Dimensions: H78 x L300 x W100 cm Materials: Coated steel frame - 4mm thick top, laminated with Forbo desktop Also Available, CNSTR Table V...