Vintage Rotary Switch

Single standard bulb socket with on/off rotary switch, removable brass harp and brass cap finial.

Single standard bulb socket and 3-way rotary switch. Likely made in the USA, in the mid 20th Century.

Single standard bulb socket and 3-way rotary switch. Likely made in the USA, circa 1960s.

Single standard bulb socket with an on/off rotary switch. Made in the USA, circa 1960s. Measures: 7.75w 7.75d Base to Finial: 44.75h, Base to Socket: 34.75h, Weighs Approximately:...

Single standard bulb socket and 3-way rotary switch. Likely made in Asia, circa 1994. Measures: 8 W 8 D base to finial: 29 H, base to socket: 21 H, Weighs approximately: 6 lb each.

Single standard bulb socket and 3-way rotary switch. Made in the USA, in the mid 20th Century.

Single standard bulb socket and 3-way rotary switch. Likely made in the USA, with marble base from Italy, circa 1960's.

Single standard bulb socket and 3-way rotary switch. Includes metal shade and glass chimney.

Single standard bulb socket and 1-way rotary switch. Likely made in Asia, in the late 20th Century.

Single standard bulb socket and 3-way rotary switch. Likely made in the USA, circa 1960's.

Single standard bulb socket with an unusual 2-way rotary switch. Made in the USA, circa 1950's. Measures: 6.5w 6.5d Base to Finial: 34h, Base to Socket: 26h, Weighs Approximately: 7...

The base houses the control panel with switches and a rotary knob. At the back, there is a cooling fan and loose wires.

This warm lighting is nicely dimmed and switched by a rotary knob on the lamp. This lighting can also be switched separately in only the four inner lamps or the eight in the outer ...

Made in extraordinary quality, has a perspex diffusor, which creates very soft lighting, a rotary switch at the bottom for three different lighting settings.

Vintage Arrow porcelain On/Off rotary switch is Made in the U.S.A.

Table top is in two separate pieces. Rotary switch just above the tabletop.

Tallest tube has a dimming rotary switch near the top.

Pierced brass shade with three-way rotary switch.

Vintage table lamp with original shade (re-covered) in style of Tommi Parzinger with four "Metal Candles" on brass metal base and rotary switch at top. Base 7".

Each lamp has eight candelabra base lights controlled by a rotary switch on top.

Beautiful murano glass table lamp with swirl pattern, mushroom shaped, large 14'' height, clean and undamaged, rotary switch on white electric wire, made in Italy, late 1970's Diamet...

Original socket for E 27 bulbs with ceramic rotary switch, new wire. Good vintage condition. Measures: Shade diameter 16cm.

Original 3 inch finial and rotary switch in base. Original shade is ok, but probably should be replaced.

Three magnetically mounted adjustable lamps, with a hidden uplight. Four rotary switches control the lamps individually. A very uncommon design, utilising the often seen magnet mount...

Long swag style chain attached with a rotary switch. Dimensions: Diameter: 16.25," height: 8.5" Condition: Excellent.

Attributed to Gerald Thurston, the rotary switch is marked "Lightolier."

Triple lamp clusters designed to take 3" decorative globe bulbs. Rotary switches on bulb cluster. Shades are 8" x 17"

Beautiful black Nero Marqunia marble, original brass hardware and desirable three way rotary switch. These heavy, and elegant lamps are a grounding show stopper in any room.

Manufactured by George Kovacs. 4" square column on the bias of 14" square base. Two rotary switches mounted high on the side control the red neon tube and the halogen uplight.

The stem and base are aluminum with white enamel and a rotary switch on the base. Dimensions 11.5" diameter x 20" height.

The microphone-shaped diffuser houses a shielded bulb for focused illumination, while the opposite knob functions as both a rotary switch and a handle to adjust tilt.

Regency style American Stiffel table lamp with 12-sided solid brass urn trophy body topped with an ornate acanthus. Original brass rotary switch at base, the lamp has been cut down j...

The lamp has been rewired and includes an on/off rotary switch along the cord.

The lamps allow for two light settings with a rotary switch on the brown cloth cord. Dimensions 7" diameter x 16.75" height, 6" base diameter Condition Good restored conditio...

It operates with a convenient rotary switch and is in excellent working condition.

The original socket requires standard E27 / E26 light bulbs. The rotary switch is situated directly on the lampshade.

The lamp has three light settings which can be adjusted on the rotary switches. Dimensions: 17" diameter x 26.25" height; 12" base diameter Condition: Excellent restored condit...

Has a walnut base with brass 'stems' and fiberglass shades. Also has a rotary switch and lights up three ways. The piece is in good, working condition showing wear from age and use i...

Condition Good vintage condition; original wiring with rotary switch. Small chips at front of stone shade.

The lamp is newly rewired and has two horizontal side-by-side bulb sockets with pull chains. An additional rotary switch is attached to the cord. Measures: 42 1/2" height, 17" wi...

These are a classic! Newly rewired with rotary switches on the cords. Dimensions: 34 in. height (at tallest). 24 in. width. 6 in. x 6 in. base.

It is paired with a white linen shade that attaches to the top of it's brass stem. The rotary switch is located on the brown silk cord. It's minimal, refined design is a perfect exam...

The lamp is rewired and has two S-cluster bulb sockets with pull chains. An additional rotary switch is attached to the cord. Measures: 19" shade diameter, 6" cube base.

The lamps each require a single bulb. A rotary switch is located on the cord and can be used to adjust the intensity of the light.

The Cords are The Original Gold Toned Cords with Rotary Switch 1970s Height : 22 in Width : 10 in Depth : 10 in Base : 6.5 in X 6.5 in

Shade and frame made of metal. Rotary switch on the screen. Fully functional and without damage, no bumps or dents on the shade.

The lamp can be dimmed using a continuously variable rotary switch on the lamp base. The German lighting manufacturer was founded in 1964 and is known for high-quality lights of all ...

Vintage Italian candle light sconce features mirror with gilt metal frame decorated in foliate leaf and vine having attached crystal flowers and terminating at base with gathered bou...

The light can be adjusted with the two-way rotary switch attached to the cord. This pair is an exceptional source of light and will add a sense of whimsy to an interior. 30 1/4" h...

The light intensity can be adjusted with the two-way rotary switch attached to the cord. In addition, the lamps are paired with navy blue opaque shades, with a gilded interior, a per...

They are newly rewired with single bulb sockets and rotary switch cords. They have also been paired with new custom linen shades.

The dome shaped shade is perforated, allowing for small droplets of light to shine through for a unique detail to the piece. The lamp has a rotary switch at the top of the shade for ...

One original brass ceramic E27 socket with rotary switch. Very long cable. Works on 220V and 110V.

Two E14 bulbs for max. 40W each. Both with original rotary switch on the foot. At one lamp a small piece broke off but it still works (photo 9) Fully functional and 100% original c...

This item has been fully re-wired and electrically tested, the lamp is controlled with a polished cast brass rotary switch mounted to one of the tripod legs.

The rear handle is also the rotary switch for the lamp. 100% original condition.

This is a very stylish 90 degree wall light, sold ready for use with a 40watt E27 vintage filament bulb fitted manufactured by Wiska. Reclaimed from military vessels mainly marine...

The Oceanic bronze wall light is ideal for creating industrial style interiors. Vintage industrial wall fixtures reclaimed from decommissioned cargo ships and professionally restored...

Kokosha flame proof cast bronze wall or ceiling light fitted with Edison squirrel cage filament bulb made in the 1990s by Kokosha - Osaka, Japan. These fixture also feature brass...

Condition: Newly Rewired, New Shades Dimensions: 18"H x 5.50"W x 5.50"D Shade: 7.25"H x 10"W x 10"D This pair of Neoclassical Revival table lamps from the 1960s features elegant ur...

Italian explosion proof ceiling light Made by Cortem a manufacturer of explosion proof electrical equipment these lights were specifically designed to light up hazardous areas with...

A reclaimed vintage industrial brass and bronze explosion proof ceiling pendant by Wiska. Originally marine lighting fixtures reclaimed from super tankers and cargo ships built in ...

This excellent example of an original explosion proof lamp was salvaged from an old Japanese ship. Dated c1975, it has the original ceramic and brass E27 lamp holder which looks bran...

Becoming more sought after and not often seen, these reclaimed original 1950's flush mount lamps have been expertly modified to pendant lights. The main body of the light is made ...