Used Copper Sheet

This is hand hammered and individually nailed sheets of copper over a craved cedar sculpture. It has been used outdoors and developed a wonderful patina.

The underside reveals concentric hammer impressions and hand-worked joins typical of early vernacular sheet-copper fabrication. Minor surface marks, soft shallow dings, and gentle ri...

The driver is rendered in sheet and molded copper, the arms extended holding reins, and a cap.

The vessel was created in the tradition of tsuiki, the Japanese technique of forming copper through repeated hammering. Gyokusendo describes its copperware as being shaped from a sin...

Antique 19th century American swell body gilt copper and zinc rooster weathervane. Molded detail showing feathers with the addition of sheet copper wattle and comb.

The wood structure is sheathed in fine sheet copper, which has been decorated with a motif of repoussé birds and flowers, and otherwise has a hammered effect.

They utilize the hammering technique to create all sorts of objects. Molded from a single sheet of copper, it has a distinctive, beautiful silhouette.

Condition and Production: - Being a copperplate engraving, this map would have been meticulously engraved on a copper sheet before being inked and pressed onto paper, which often ...

A large coffee table in elm with a solid copper top it made of a thick bent sheet of copper and is ballpoint hammered throughout.

Materials: Hand-blown art glass, sheet copper, copper wire. Origin: Romania. We ship internationally, tracked.

Materials and Techniques: Although he called his cladding "Copper, Bronze, and Pewter", the actual materials used were sheet copper, bronzed sheet steel, and sheet copper covered wit...

Antoine-Bonaventure Baron was the master craftsman who physically sat at the workbench, held the burin, and carved these specific bird plates into the copper sheets. Incidentally, p...

Splendid Gio Ponti style classical Italian Metaphysical 1950s-1960s copper wall mirror. Hammered copper and aluminum sheets on wood.

In contrast to the Alpine picture clocks, which were painted on iron or copper sheet, picture clocks with oil paintings on canvas were created at the same time in France, focusing on...

The exterior sleeve was fashioned from sheet copper, mechanically formed and worked before being fixed directly to the glass and patinated to a rich antique bronze tone.

Striking Maitland-Smith handmade occasional table. c. 1970, two-tiers with a round top clad in etched sheet copper, with reeded bamboo trim, having classical maiden caryatid legs on ...

Hand-raised from sheet copper and heavily coated in traditional tin plating.

The powerful dragon figure is mounted on a sheet of oxidized copper, whose richly developed patina lends remarkable depth and atmosphere to the composition.

This rhythmic distribution reflects the Scottish decorative style popularised during the Edwardian period, often adopted by Cornish workshops such as J & F Pool circa 1910. Fo...

Refusing the use of machines to give form to his creations, Dunand used a boxwood mallet to raise sheets of copper, brass, or maillechort from the interior.

This extremely fine late 19th century large Indian Raj period charger is made from heavy gauge brass, which is extensively hand decorated with exceptionally fine applied radial panel...

Matthäus Merian the Elder (Swiss-German, 1593–1650), workshop and heirs " Amsterdam ", circa 1659 Copper engraving on two joined sheets Sheet Size: 13" x 29 3/8" Housed in a newe...

The stepped faces are set with elongated triangles of verdigris-patinated sheet copper, fixed with rows of small copper tacks and pointing downward against upward-pointing triangles ...

Imitating riveted sheet copper, this Doulton Lambeth Silicon ware stoneware jug features applied seams, raised rivet heads, hammered indentations, and subtle green verdigris accents ...

The piece was handcrafted using sheets of copper and bronze, carefully shaped and welded together to create its distinctive forms, volume, and details.

The tops are covered in sheet copper with a patinated effect and nailhead trim, and the bases are black-painted metal, with decorative copper tubing.

A dynamic and expressive mid-century brutalist sculpture depicting a spray of cattails and grasses, crafted from flame patinated copper and brass rods. The vertical stems are punctua...

We are delighted to offer for sale this exceptionally rare and important original circa 1900 Carlo Bugatti occasional table This table is special, designed by Carlo Bugatti, Italy...

Recently, the artist has combined copper electroplated objects with images photo engraved on sheets of copper.

Produced by artisans of Ensamble Artesano for Taller Maya, the piece emphasizes surface articulation and structural clarity over ornament. Formed from a single sheet of copper, the ...

Set of Three Double-Scene Biblical Copper Engravings, Pieter Mortier, ca 1700 This rare and decorative set consists of three early-18th-century biblical copper engravings, each shee...

The sloping faces are banded in alternating tiers of rose-brown sand and of sheet copper, the copper tiers and the pyramidal cap studded all over with small copper discs that have ta...

He contracts with a potter to make ceramic plates which he paints using images inspired by the landscape and has done a series of paintings often etching on thin copper sheets. His w...

He contracts with a potter to make ceramic plates which he paints using images inspired by the landscape and has done a series of paintings often etching on thin copper sheets. His w...

This monumental dining or card table features a surface of inlaid mixed-metal including brass, sheet metal and copper. The top is mounted to a cast steel 'anchor' base, the depth of ...

This piece is one of the few that could be attributed to MARIO CACCIAPUOTI , in his brief stint with the MARIO CACCIAPUOTI AND C, In Milan. It is made of stoneware and plated with s...

It features: - A galvanized sheet metal exterior, ensuring exceptional durability and protection - Copper-riveted construction throughout, visible in the meticulous rows of rivets s...

Rare pair modernist V-317 wall-lamps, designed by Hans-Agne Jakobsson. Sheet metal painted white (original finish), upper shade in brushed copper finish.

- original good condition - opal white glass in the shape of a bell connected by a circle with lower frosted glass - patinated copper - plated sheet metal - only re-polished - new...

This very decorative wall lamp was designed and made by RAAK in the 1960s. It is made of black sheet metal that has copper tubes at one side for a stunning light effect.

Repousse sheet copper lion's head architectural element from the Union Railroad Station, Worcester, Massachusetts, circa 1875.

Dominic John Mingolla actually “paints” on sheets of copper, sprinkling colored glass powder onto the copper metal sheet, refining its form and then firing each layer in a kiln.

The feathered tail, or “fletching” is constructed from molded sheet copper with a corrugated center ridge to catch the wind.

Constructed from patinated sheet steel and copper, the design features a sharply tapered base that rises to a circular frame adorned with angular copper leaves.

The back of the figure is also entirely covered by sheets of copper. The face extended down to a shaft that has a diamond shape opening viewing from side, A slightly large base concl...

Perfectly cleaned, new wiring. iridescent glass made by Loetz, Martelé decor body made of copper-plated brass sheet.

Late 19th century, classic form molded rooster copper weathervane with sheet brass tail and zinc legs, which are supported by the original 13 1/2" copper bar.

The process involved sandwiching a sheet of copper between two outer layers of sterling silver, then heating and rolling (annealing) it into sheets to then be formed into an assortme...

Pennsylvania, first half of the 19th century, cut sheet metal, copper tubing, cast zinc arrowhead, in old gilt gold painted surface, on a later wooden display stand.

The repairs incorporate copper plates, tin sheets, and iron staples, each aging at a different pace.

A fantastic ash tray in wonderful shape in soft white color with brass and copper details. The vintage ashtray was made out of white lacquered perforated sheet metal, copper and a br...

Each naive figure has a carved head with detailed features, on simple bow-legged body, with carved stick arms ending in detailed hands, and wearing a Stetson made of copper pipe and ...

This original copper engraving from Pieter Mortier's illustrated Bible, published in Amsterdam circa 1700, combines a biblical scene and a gallery of prophets on one sheet.

This original copper engraving from Pieter Mortier's illustrated Bible, published in Amsterdam circa 1700, shows two scenes from the Apocrypha on one sheet.

This original copper engraving from Pieter Mortier's illustrated Bible, published in Amsterdam circa 1700, shows two Old Testament scenes on one sheet.

This original copper engraving from Pieter Mortier's illustrated Bible, published in Amsterdam circa 1700, shows two Old Testament scenes on one sheet.

This original copper engraving from Pieter Mortier's illustrated Bible, published in Amsterdam circa 1700, shows two Old Testament scenes on one sheet.

This original copper engraving from Pieter Mortier's illustrated Bible, published in Amsterdam circa 1700, shows two Old Testament scenes on one sheet.

This original copper engraving from Pieter Mortier's illustrated Bible, published in Amsterdam circa 1700, shows two Old Testament scenes on one sheet.

This original copper engraving from Pieter Mortier's illustrated Bible, published in Amsterdam circa 1700, shows two Old Testament scenes on one sheet.