Skip to main content

Charles Sherman Art

American, b. 1947
Charles Sherman is an L.A.-based sculptor and jewelry designer renowned for his continuum sculptures, particularly the three-dimensional Möbius strip (also known as the Infinity Ring). Born in Atlantic City, NJ in 1947, Sherman's work is deeply influenced by his lifelong study of ancient civilizations, world cultures, and religions. Since 2002, Sherman has explored sculptural forms that express the concept of infinity; hand-building his clay Infinity Ring sculptures using primitive tools and techniques. These are often transformed into cast bronze, stainless or welded steel pieces. In recent years, he has incorporated mosaic elements into his work using glass, agates, crystals, and ancient ammonite fossils to adorn geometric forms. In 2006, Sherman began translating his sculptural forms into sterling silver jewelry designs, creating wearable art inspired by sacred geometry. Sherman's sculptures are included in museums and public collections, such as the San Diego Museum of Art, the Mobile Museum of Art, and the Golda Meir Center for Political Leadership at Metropolitan State University of Denver. His work has been exhibited in solo and group shows across the United States and Asia. Notable public installations include "Serenity" (2006), part of his monumental ceramic Infinity Ring series, installed at the Fountain Park Sculpture Garden in Arizona, and at the John Entenza House in Santa Monica, California. Sherman's philosophy of life and art is to promote the positive, aiming to elevate the spirit of the viewer through his minimalist, conceptual works inspired by sacred geometry.
to
1
1
7
Overall Width
to
Overall Height
to
1
8
1
1
1
1
1
8
6
2
2
1
9
11,246
2,855
2,494
1,443
9
Artist: Charles Sherman
Golden Sentry
Golden Sentry

Golden Sentry

By Charles Sherman

Located in Culver City, CA

The verticality of, “Golden Sentry” gives the sculpture a male protective energy and the rich organic surface gives the sculpture a female energy. A perfect balance of male and femal...

Category

2010s Charles Sherman Art

Materials

Steel

The Hand of Creation

The Hand of Creation

By Charles Sherman

Located in Culver City, CA

The Hand of Creation is double life-sized; four times the mass of a human hand. Sherman desired to make a hand that expresses gentility, wisdom, and beauty. He chose a woman's hand a...

Category

1990s Charles Sherman Art

Materials

Bronze

Sentry's Delight

Sentry's Delight

By Charles Sherman

Located in Culver City, CA

A tall and narrow male protective energy. The verdigris organic surface has a feminine quality to this sculpture is a perfect balance of male and female energy. It is made from 12-ga...

Category

2010s Charles Sherman Art

Materials

Stainless Steel

Light's Vision

Light's Vision

By Charles Sherman

Located in Culver City, CA

The harmonious colors of the mosaic tiles and mirrors gives light, and inspiration to any environment. The sculpture was made from 12 gauge sheet metal that has been welded together....

Category

2010s Charles Sherman Art

Materials

Stainless Steel

Infinity's Color Wheel
Infinity's Color Wheel

Infinity's Color Wheel

By Charles Sherman

Located in Culver City, CA

This continuum of lines, forms and colors allows us to be transported to a place of awe and wonderment. The form was made with a mold, but the surface mosaic is completely unique. It...

Category

2010s Charles Sherman Art

Materials

Ceramic, Glass, Mirror, Mosaic

Shimmering Dance

Shimmering Dance

By Charles Sherman

Located in Culver City, CA

As the sunlight reflects upon this sculpture, the three-dimensional quality of the ground surface allows us to stop and be in awe of its beauty. It is made from 12-gauge sheet metal ...

Category

2010s Charles Sherman Art

Materials

Stainless Steel

Ancient Flight
Ancient Flight

Ancient Flight

By Charles Sherman

Located in Culver City, CA

The perfect balance of the upward movement of the peaks of this sculpture gives the feeling of the potential for growth at any stage of one's life. The piece is made from three indi...

Category

2010s Charles Sherman Art

Materials

Stainless Steel

Rising Wisdom Tower
Rising Wisdom Tower

Rising Wisdom Tower

By Charles Sherman

Located in Culver City, CA

This triple Miracle Tower rises in perfect balance and harmony. The tallest tower is the thinnest and the shortest is the widest. The middle tower is just that. This sculpture is fas...

Category

2010s Charles Sherman Art

Materials

Stainless Steel

Soaring Sentry
Soaring Sentry

Soaring Sentry

By Charles Sherman

Located in Culver City, CA

This miniature triple Miracle Tower has the energy of focusing upward as each of the three towers merge to form one peak. It is made from three individual Miracle Towers that were w...

Category

2010s Charles Sherman Art

Materials

Stainless Steel

Related Items
Endless column of glass / 240601 by Toshio Iezumi - Contemporary sculpture
Endless column of glass / 240601 by Toshio Iezumi - Contemporary sculpture

Endless column of glass / 240601 by Toshio Iezumi - Contemporary sculpture

By Toshio Iezumi

Located in Paris, FR

Endless column of glass / 240601 is a glass sculpture by Japanese contemporary artist Toshio Iezumi, dimensions (not including the stainless steel base) are 180 × 10 × 10 cm (70.9 × ...

Category

2010s Contemporary Charles Sherman Art

Materials

Stainless Steel

Psyche by Franck K - Installation of Six Sculptures, Outdoor, Op' Art
Psyche by Franck K - Installation of Six Sculptures, Outdoor, Op' Art

Psyche by Franck K - Installation of Six Sculptures, Outdoor, Op' Art

By Franck K

Located in Paris, FR

Psyche is a unique installation of three mirror-polished stainless steel sculptures on a concrete base and three painted stainless steel stabiles and bases by contemporary artist Fra...

Category

2010s Contemporary Charles Sherman Art

Materials

Concrete, Stainless Steel

Close to Heart 1 & 2 - Wood sculpture by Zlata Kornilova
Close to Heart 1 & 2 - Wood sculpture by Zlata Kornilova

Close to Heart 1 & 2 - Wood sculpture by Zlata Kornilova

By Zlata Kornilova

Located in Paris, FR

Sculpture Close to Heart 1 & 2 Limited edition of 12 (each sculpture) Dimensions: - Close to heart 1 (black): H. 73. x D. 34 cm - Close to heart 2 (natural): H. 82. x D. 22 cm Medi...

Category

21st Century and Contemporary Abstract Charles Sherman Art

Materials

Steel

Mirror “with fold” 123 by Franck K - Large stainless steel sculpture, reflection
Mirror “with fold” 123 by Franck K - Large stainless steel sculpture, reflection

Mirror “with fold” 123 by Franck K - Large stainless steel sculpture, reflection

By Franck K

Located in Paris, FR

Mirror “with fold” 123 is a unique mirror-polished stainless steel sculpture and concrete base by contemporary artist Franck K, dimensions are 143 × 123 × 56 cm (56.3 × 48.4 × 22 in)...

Category

2010s Contemporary Charles Sherman Art

Materials

Concrete, Stainless Steel

Kaktus by Franck K - Stainless steel sculpture, reflections, light, vision
Kaktus by Franck K - Stainless steel sculpture, reflections, light, vision

Kaktus by Franck K - Stainless steel sculpture, reflections, light, vision

By Franck K

Located in Paris, FR

Kaktus is a unique mirror-polished stainless steel and resin sculpture and burnt oak wood base by contemporary artist Franck K, dimensions are 204 × 70 × 70 cm (80.3 × 27.6 × 27.6 in...

Category

2010s Contemporary Charles Sherman Art

Materials

Stainless Steel

Mirror “with fold” 148 by Franck K - Large Outdoor Stainless Steel Sculpture
Mirror “with fold” 148 by Franck K - Large Outdoor Stainless Steel Sculpture

Mirror “with fold” 148 by Franck K - Large Outdoor Stainless Steel Sculpture

By Franck K

Located in Paris, FR

Mirror “with fold” 148 is a unique mirror-polished stainless steel sculpture and concrete base by contemporary artist Franck K, dimensions are 153 × 148 × 50 cm (60.2 × 58.3 × 19.7 i...

Category

2010s Contemporary Charles Sherman Art

Materials

Concrete, Stainless Steel

Wall mirror “with fold” I by Franck K - Stainless steel sculpture, reflection
Wall mirror “with fold” I by Franck K - Stainless steel sculpture, reflection

Wall mirror “with fold” I by Franck K - Stainless steel sculpture, reflection

By Franck K

Located in Paris, FR

Wall mirror “with fold” I is a unique mirror-polished stainless steel sculpture by contemporary artist Franck K, dimensions are 92 × 92 × 3 cm (36.2 × 36.2 × 1.2 in). The sculpture ...

Category

2010s Contemporary Charles Sherman Art

Materials

Stainless Steel

Viga 1 by Tom Price - Abstract sculpture, wood, resin, synthetic, mineral, life
Viga 1 by Tom Price - Abstract sculpture, wood, resin, synthetic, mineral, life

Viga 1 by Tom Price - Abstract sculpture, wood, resin, synthetic, mineral, life

By Tom Price

Located in Paris, FR

Viga 1 is a sculpture by contemporary artist Tom Price. This sculpture is made of resin, tar, steel, wood, dimensions are 233 × 45 × 45 cm (91.7 × 17.7 × 17.7 in). The indicated dime...

Category

2010s Contemporary Charles Sherman Art

Materials

Steel

P.1995 by Toshio Iezumi - abstract wall sculpture, glass and mirror
P.1995 by Toshio Iezumi - abstract wall sculpture, glass and mirror

P.1995 by Toshio Iezumi - abstract wall sculpture, glass and mirror

By Toshio Iezumi

Located in Paris, FR

P.1995 is an wall sculpture by Toshio Iezumi. Heat reflective glass and half mirror, 9.8 x 9.8 x 2.7 inches (25 × 25 × 7 cm). The sculpture is signed and available in 5 editions. ...

Category

1990s Contemporary Charles Sherman Art

Materials

Glass, Mirror

Brutalist Hand Forged Iron Mosaic Sculpture Menorah Israeli David Palombo
Brutalist Hand Forged Iron Mosaic Sculpture Menorah Israeli David Palombo

Brutalist Hand Forged Iron Mosaic Sculpture Menorah Israeli David Palombo

By David Palombo

Located in Surfside, FL

Hand Forged Iron Stone Mosaic Hanukah Menorah Candelabra David Palombo was an Israeli sculptor and painter. He was born in Turkey to a traditional family and immigrated to the Land of Israel with his parents in 1923. They lived in the Nahalat Shiva neighborhood of Jerusalem. In 1940 he began his studies at Bezalel Academy of Arts and Design, and from 1942 was a student of sculptor Ze’ev Ben-Zvi. For a period of time, Palombo was an assistant at Ben-Zvi’s studio and also taught at Bezalel. During this period he was also a member of the “Histadrut HaNoar HaOved VeHaLomed” (The General Federation of Students and Young Workers in Israel). In the 1940s he took art lessons at night. In 1948 he went to Paris, where he visited the studio of the sculptor Constantin Brancusi whose work influenced him. Around 1958 he married the artist Shulamit Sirota. In 1960 he quit his job to devote himself to art. In 1964 he married for the second time to the artist Yona Palombo. The two of them went to live in an abandoned home on Mount Zion in Jerusalem. In 1966 he was killed when the motorcycle on which he was riding ran into a chain stretched across the street to prevent the desecration of Shabbat. His widow opened a museum in their home that was active until the year 2000. Work by Palombo is included in the Judaic collection of the Jewish Museum (a well known Hanukkah menora). Palombo executed the impressive metal gates of the Tent of Remembrance at the Yad Vashem, the memorial to the martyrs of the holocaust, as well as the gates to the Knesset Building the United Nations Educational Scientific and Cultural Organization (Unesco award) awarded him a scholarship for study in Japan. He worked in marble, granite, bronze, iron and steel. as well as with glass mosaic tiles. Palombo’s early works, in the 1950s, were influenced by modernist sculptors such as Brancusi. These works were composed of abstract images from nature and were carved out of stone or wood. At the end of the 1950s he began making metal sculptors, using the technique of welding. His work took on a more abstract and expressive character. Education 1940 Painting with Isidor Ascheim, New Bezalel School for Arts and Crafts, Jerusalem 1942 Sculpture with Zeev Ben Zvi, Jerusalem 1956 Mosaic, Ravenna, Italy 1958 Welding Course Awards And Prizes 1966 UNESCO Award Exhibitions: Sculpture in Israel, 1948-1958 Mishkan Museum of Art, Kibbutz Ein Harod Artists: Zvi Aldouby, Yitzhak Danziger, Arieh Merzer, Dov Feigin, Aaron Priver, David Palumbo, Menashe Kadishman, Kosso Eloul, Yehiel Shemi, Zahara Schatz. The Spring Exhibition of Jerusalem Artists, Artists' House, Jerusalem Artists: Palombo, David Bezalel Schatz, Mordechai Levanon, Fima, Ludwig Blum 12 Artists, The Bezalel National Museum, Jerusalem Avraham Ofek, Aviva Uri, Avigdor Arikha, Yosl Bergner, Lea Nikel, Palombo, Ruth Zarfati...

Category

Mid-20th Century Arte Povera Charles Sherman Art

Materials

Stone, Iron

Brutalist Hand Forged Iron Mosaic Sculpture Wall Sconce Israeli David Palombo
Brutalist Hand Forged Iron Mosaic Sculpture Wall Sconce Israeli David Palombo

Brutalist Hand Forged Iron Mosaic Sculpture Wall Sconce Israeli David Palombo

By David Palombo

Located in Surfside, FL

Hand Forged Iron Stone Mosaic Pricket Sconce Candelabra Holocaust Memorial Judaic Wall Sconce Sculpture David Palombo was an Israeli sculptor and painter. He was born in Turkey to a traditional family and immigrated to the Land of Israel with his parents in 1923. They lived in the Nahalat Shiva neighborhood of Jerusalem. In 1940 he began his studies at Bezalel Academy of Arts and Design, and from 1942 was a student of sculptor Ze’ev Ben-Zvi. For a period of time, Palombo was an assistant at Ben-Zvi’s studio and also taught at Bezalel. During this period he was also a member of the “Histadrut HaNoar HaOved VeHaLomed” (The General Federation of Students and Young Workers in Israel). In the 1940s he took art lessons at night. In 1948 he went to Paris, where he visited the studio of the sculptor Constantin Brancusi whose work influenced him. Around 1958 he married the artist Shulamit Sirota. In 1960 he quit his job to devote himself to art. In 1964 he married for the second time to the artist Yona Palombo. The two of them went to live in an abandoned home on Mount Zion in Jerusalem. In 1966 he was killed when the motorcycle on which he was riding ran into a chain stretched across the street to prevent the desecration of Shabbat. His widow opened a museum in their home that was active until the year 2000. Work by Palombo is included in the Judaic collection of the Jewish Museum (a well known Hanukkah menora). Palombo executed the impressive metal gates of the Tent of Remembrance at the Yad Vashem, the memorial to the martyrs of the holocaust, as well as the gates to the Knesset Building the United Nations Educational Scientific and Cultural Organization (Unesco award) awarded him a scholarship for study in Japan. He worked in marble, granite, bronze, iron and steel. as well as with glass mosaic tiles. Palombo’s early works, in the 1950s, were influenced by modernist sculptors such as Brancusi. These works were composed of abstract images from nature and were carved out of stone or wood. At the end of the 1950s he began making metal sculptors, using the technique of welding. His work took on a more abstract and expressive character. Education 1940 Painting with Isidor Ascheim, New Bezalel School for Arts and Crafts, Jerusalem 1942 Sculpture with Zeev Ben Zvi, Jerusalem 1956 Mosaic, Ravenna, Italy 1958 Welding Course Awards And Prizes 1966 UNESCO Award Exhibitions: Sculpture in Israel, 1948-1958 Mishkan Museum of Art, Kibbutz Ein Harod Artists: Zvi Aldouby, Yitzhak Danziger, Arieh Merzer, Dov Feigin, Aaron Priver, David Palumbo, Menashe Kadishman, Kosso Eloul, Yehiel Shemi, Zahara Schatz. The Spring Exhibition of Jerusalem Artists, Artists' House, Jerusalem Artists: Palombo, David Bezalel Schatz, Mordechai Levanon, Fima, Ludwig Blum 12 Artists, The Bezalel National Museum, Jerusalem Avraham Ofek, Aviva Uri, Avigdor Arikha, Yosl Bergner, Lea Nikel, Palombo, Ruth Zarfati...

Category

Mid-20th Century Arte Povera Charles Sherman Art

Materials

Iron

Synthesis S by Tom Price - Resin, tar, acrylic, steel and LED sculpture
Synthesis S by Tom Price - Resin, tar, acrylic, steel and LED sculpture

Synthesis S by Tom Price - Resin, tar, acrylic, steel and LED sculpture

By Tom Price

Located in Paris, FR

Synthesis S is a sculpture by the English artist Tom Price. Resin, tar, steel, acrylic, LED. 200.5 cm × 40 cm × 40 cm (Dimensions include the stand). In the Synthesis series, Tom Pr...

Category

2010s Contemporary Charles Sherman Art

Materials

Steel

Charles Sherman art for sale on 1stDibs.

Find a wide variety of authentic Charles Sherman art available for sale on 1stDibs. You can also browse by medium to find art by Charles Sherman in metal, stainless steel, glass and more. Not every interior allows for large Charles Sherman art, so small editions measuring 9 inches across are available. Charles Sherman art prices can differ depending upon medium, time period and other attributes. On 1stDibs, the price for these items starts at $3,900 and tops out at $25,000, while the average work can sell for $8,000.