Polystyrene Furniture

Armchair model “Capitello” Manufactured by Gufram Italy, 1970s Polyurethane Measurements 110 cm x 110 cm x 60h cm 43,3 in x 43,3 in x 23,6h in Literature Michael Collins. Towards Pos...

This is a Victoria & Albert Armchair, designed by Ron Arad for Moroso in 2000. This particular example dates to 2020, and has seen little use, as it was acquired for staging in a mod...

"Spitting Pink IV" by New York artist Kevin Paulsen. Crafted with a polystyrene base with pigment and plaster applied to surface, mounted in painted wooden shadowbox surround.

"Dispersion and Confluence" by artist Kevin Paulsen. Vibrant painting created with plaster and pigments on polystyrene, mounted in a shadowbox frame.

Small format painting by noted New York artist Kevin Paulsen titled "Our Decision to Eat Hair" and inscribed on back "Two Pugilists Smoking Between Rounds" and dated 2016 on reverse....

This model Kilta was designed by Finland designer Olli Mannermaa for Martela in 1955. The Kilta chair is a Finnish design classic. Kilta’s timeless design...

Mit & Ditt, Sweden. Figure from the Moomin universe made of polystyrene. The Groke. From the 2000s. Perfect condition. Original packaging. Dimensions: H 19.5 cm x W 14.0 cm.

Mit & Ditt, Sweden. Figure from the Moomin universe made of polystyrene. Mrs Fillyjonk. From the 2000s. Perfect condition. Original packaging. Dimensions: H 24.5 cm x W 9.0 cm.

Mit & Ditt, Sweden. Figure from the Moomin universe made of polystyrene. Mr. Hemulen. From the 2000s. Perfect condition. Original packaging. Dimensions: W 12.0 cm x H 21.0 cm

Mit & Ditt, Sweden. Figure from the Moomin universe made of polystyrene. Snufkin From the 2000s. Perfect condition. Original packaging. Dimensions: Height 20.0 cm x Width 8.0 cm.

A pair of outside armchairs designed in the sixties by Eero aarnio

Floor lamp or low table lamp made of printed polycarbonate, wooden handle of a banjo and wooden base. The button above serves as the switch. With globe lamp e27 220v.

Guise 5 spray coffee table by Odd Matter, the Netherlands, 2018. Nilufar edition. EPS foam, spray. Measures: 123 x 80 x H 45 cm, 48.4 x 31.5 x H 17.7 in. Guise explores the first encounter...

Fabio Novembre uses furniture design to tell intense and fascinating stories in which the protagonist is often the human figure. The Nemo Armchair is a life-size sculptural seat cast...

"The Bergundian Players" by Kevin Paulsen. Interior scene painting created with pigment on plaster, mounted on polystyrene, all in a shadow box frame.

The White Concrete Dumbo Elephant Contemporary Dining Table by Mary-Lynn & Carlo The Elephant Project Dimensions: H 76 x W 315 x D 110 cm Materials: Concrete colored, foam polystyren...

Daisy Sculptural Chair – Indoor - Outdoor White Concrete by Mary-Lynn & Carlo, 2021 The Elephant Project Dimensions: H 60 x W 69 x D 81 cm Materials: concrete colored, foam polystyre...

A life-size Greek mask becomes an inhabitable throne. The Nemo Swivel Armchair is carved from a single block of matte-black polyethylene, its classical profile turned outward while t...

Multiplug light by Thomas Ballouhey, Crossover collection, the Netherlands, 2019. Nilufar edition. MDF, polystyrene, light switch, electric socket, LED light, wiring, acrylic resin. ...

One of a kind mosaic ottoman pouf sculpture created using an original vintage small customized covered in fragments of ceramic, porcelain dishes, mirrors, glass, etc. All these diffe...

The Tokyo-Pop collection marks, in 2002, the debut on the international scene by Tokujin Yoshioka, now considered one of the masters of contemporary design. The sofa, the armchair and especially the day-bed and the stool, forget the banality of rotational molding to become sculptures. Unforgettable and unusual shapes.The Tokyo-Pop collection marks, in 2002, the debut on the international scene by Tokujin Yoshioka, now considered one of the masters of contemporary design. The Driade Tokyo Pop Daybed...

The Tokyo-Pop collection marks, in 2002, the debut on the international scene by Tokujin Yoshioka, now considered one of the masters of contemporary design. The sofa, the armchair and especially the day-bed and the stool, forget the banality of rotational molding to become sculptures. Unforgettable and unusual shapes.The Tokyo-Pop collection marks, in 2002, the debut on the international scene by Tokujin Yoshioka, now considered one of the masters of contemporary design. The Driade Tokyo...

The Tokyo-Pop collection marks, in 2002, the debut on the international scene by Tokujin Yoshioka, now considered one of the masters of contemporar...

Jerry Round Coffee Table – Indoor-Outdoor Yellow Concrete by Mary-Lynn & Carlo Dimensions: D 150 x H 40 cm Materials: concrete colored, foam polystyrene Finish: water, stains repelle...

MAD Architects have reinvigorated this favourite of mid-20th century design, the floor-ceiling suspension light. The drooping ridged surface of the PU and stainless steel shade conve...

Vintage Microchip Sculpture featuring a Lady's Head. $1,275 This piece of abstract art features a female head made out of nails, screws, electronic boards and a few other random materials all fixed onto a styrofoam head. Some red paint has been applied to the 'lips'. A nice addition to your artwork collection...

A demonstration of both imagination and strong design skills, the Monochrome console table is a remarkable piece that stands out in any room or sett...

A garden planter with a traditional truncated conical shape - almost an archetype of its own shape - that responds in a simple way to an old demand, interpreted in a new, sophisticat...

PLAVNYK is the visual center of the collection and any room wherever it appears. Made of lightweight author's material, it can reach almost two meters in height. It is a real shining...

Is more than two meters long and can illuminate any table, bar or entire corridor. And thanks to its amazing artistic form, it will become a decoration of the room and a favorite of ...

The Philippe Starck large planter Holly All for Serralunga is not just a pot. It can also be a chair or unique sculpture, part of the category of outdoor patio furniture. The hole th...

Sculptural Kaa Buffet Table – Playful Blue Concrete by Mary-Lynn & Carlo Dimensions: 200 x D 50 x H 92 cm. Materials: concrete colored, foam polystyrene Finish: water, stains repelle...

Grand Plie Sofa Designed by Ludovica & Roberto Palomba Dimensions:W2420 x D1450 x H820 mm Suitable for outdoor use, structure in polythylene in white or light grey An outdoor sofa b...

Pair of Colored Concrete Daisy Chairs - Indoor - Outdoor by Mary-Lynn & Carlo The elephant project Dimensions: H 60 x W 69 x D 81 cm Materials: Concrete colored, foam polystyrene Fin...

Set of 2 Sculptural Elephant Leg Parota Wood Table Lamps by Isabel Moncada Dimensions: Medium: Ø 53.5 x H 91 cm. Small: Ø 48.5 x H 74 cm. Materials: Turned parota wood base and fabri...

This sculptural 21st-century coffee table is made in Italy and handcrafted in lacquered wood with a tabletop in Dalmatian polystyrene, a synthetic material that looks like a precious stone. This material is light and resistant, evoking the presence of a monolithic stone...

This model Kilta was designed by Finland designer Olli Mannermaa for Martela in 1955. The Kilta chair is a Finnish design classic. Kilta’s timeless design...

This rug is produced in association with Tapetah. Reference in high-end carpets in Brazil, Tapetah has the innovation as one of its greatest pillars. In more than 20 years of operati...

Coil #3 low cabinet by Bram Kerkhofs Dimensions: D80 x W40 x H144.5 cm Materials: Stainless steel, aluminum, elastic rope (natural rubber, polyethylene). Other dimensions are av...

TITI Sculptural Stool – Indoor - Outdoor White Concrete by Mary-Lynn & Carlo Dimensions: D 40 x H 50 cm Materials: concrete colored, foam polystyrene Finish: water, stains repellent ...

Table lamp with diffused light adjustable by moving the petals. Frame made of painted aluminium with polycarbonate petals. Diffuser made of milk-white and opaline polyethylene. Trans...

3 Backrest Cushions and 2 side cushions included Serralunga, together with French designer Philippe Nigro, has developed Cannisse, an outdoor sofa with an extremely naturalistic vis...

MAD Architects have reinvigorated this favourite of mid-20th century design, the floor-ceiling suspension light. The drooping ridged surface of the PU a...

Adesso dining table by Kenneth Cobonpue Materials: Fiberglass. Aluminum. Dimensions: Diameter 100 cm x height 73 cm The boldly colored frame and geometric weave pattern of the ...

Coil drop cabinet wall mounted/ side table by Bram Kerkhofs Dimensions: D 40 x W 40 x H 75.2cm Materials:Stainless steel, aluminium, elastic rope (natural rubber, polyethylene). ...

Coil #3 cabinet wall mounted by Bram Kerkhofs Dimensions: D 80 x W 40 x H 122.4 cm. Materials: stainless steel, aluminium, elastic rope (natural rubber, polyethylene). Other dim...

TITI 01 Sculptural Stool – All-Weather Yellow Concrete by Mary-Lynn & Carlo, 2021. The Elephant Project. Dimensions: stool H 42 x W 42 x D 42 cm. Materials: concrete colored, foam po...

Easy armchair by Kenneth Cobonpue Materials: Polyethylene. Aluminum. Dimensions: 75 x 81 x H 98 cm The boldly colored frame and geometric weave pattern of the Adesso ottoman an...

Serralunga, together with French designer Philippe Nigro, has developed Cannisse, an outdoor armchair with an extremely naturalistic vision. Canisse is an open-air retreat, a shelter...

This model Kilta was designed by Finland designer Olli Mannermaa for Martela in 1955. The Kilta chair is a Finnish design Classic. Kilta’s timeless design...

Table lamp with diffused light adjustable by moving the petals. Frame made of painted aluminium with polycarbonate petals. Diffuser made of milk-white and opaline polyethylene. Trans...

Table lamp with diffused light adjustable by moving the petals. Frame made of painted aluminium with polycarbonate petals. Diffuser made of milk-white and opaline polyethylene. Trans...

This Model Kilta was designed by finland designer Olli Mannermaa for Martela in 1955. The Kilta chair is a Finnish design classic. Kilta’s timeless design and comfortable seat guara...

The Tokyo-Pop collection marks, in 2002, the debut on the international scene by Tokujin Yoshioka, now considered one of the masters of contemporary design. The sofa, the armchair and especially the day-bed and the stool, forget the banality of rotational molding to become sculptures. Unforgettable and unusual shapes.The Tokyo-Pop collection marks, in 2002, the debut on the international scene by Tokujin Yoshioka, now considered one of the masters of contemporary design. The Driade Tokyo...

Listed for sale is a Double Horizontal Prop Light Suspended, 2700K, made of polystyrene, PMMA and glass. The lamp was designed by Bertjan Pot and produced by Moooi in the Netherland...

The ‘Lady Kelly’ chair, designed by Anna Aagaard Jensen in 2018, challenges societal norms about gender, space, and power. Reserved exclusively for women, the chair compels its sitte...

The ‘Lady Ivy’ chair, designed by Anna Aagaard Jensen in 2018, challenges societal norms about gender, space, and power. Reserved exclusively for women, the chair compels its sitter ...

Object by Parisian object designer Thomas Ballouhey from his final project "Ways of Altering" at the Design Academy Eindhoven. This bowl is a captivating creation that seamlessly mer...

MAD architects have reinvigorated this favorite of mid-20th century design, the floor-ceiling suspension light. The drooping ridged surface of the PU and stainless steel shade conveys an alien Chrysalis, protecting a creature in a state of metamorphosis. The lights can be ordered in individual units or as a set (mix and match). The suspension lights come in three sizes: large ($5000 each), medium ($4000 each) and small ($3000 each). The lights can be set up in 2 ways: one is floor-to-ceiling (with “tails” in the end), the other is just hanging light set...

Working intuitively with hands-on techniques and a wide range of materials, young Norwegian designer Sigve Knutson creates objects that question contemporary mass-produced design. After presenting the critically acclaimed solo project Drawn to Production with Carwan Gallery during Milan Design Week in 2017, Knutson presents a new solo show at the gallery with works created in the past five years — including new objects inspired by the local context of Piraeus and created specially for the exhibition. Entitled Assembly, the exhibition explores the freehand, improvisatory approach that is part of Knutson’s practice, which is often driven by the pure joy of putting things together without planning or designing anything in advance. Each object he creates is unique and results from a process led by experimentation and an intuitive use of tools, to create archetypal forms that, in the designer’s own words, display different “gradients of functionality”. Abstract wood columns thus coexist in his work with playfully stacked shelves...