Cast Stone Side Tables

This side table features one walnut drawer, a cast-concrete top and hand-turned walnut legs. The fascia is cold-rolled steel laminated to a walnut veneer core. The steel, a character...

This simple and elegant design is composed of a hand-turned upright piece of wood that is cast into a concrete base. Shown in walnut, the concrete base is a rough "cracked" cast. The...

This simple and elegant design is composed of a hand-turned upright piece of wood that is cast into a concrete base. Shown in wenge, the concrete base is either a clean cube or a rou...

Contemporary Jesmonite side table - Pilotis carved by Malgorzata Bany. Inspired by support columns that lift a building above ground or water. Each piece is formed using a mould m...

Black Tripod Side Table by Kasanai Dimensions: D 38 x H 65 cm. Materials: Cement, wood, recycled paper, glue, paint. 6 kg. The fusion of sturdiness and elegance, along with the blen...

Elephante stool IV - Studio Noon Unique piece Signed Dimensions: 24” H x 24” W x 24” D Material: Pigmented cement Noon is a Philadelphia based collaboration between designer/archite...

Medium Table En Forme Libre Dimensions: 236 x 107 x h 74cm Materials: Beton Ciré (Polished Concrete). Technique: Concrete. Polished. Designer's B...

Big Foot Table Low by 101 Copenhagen. Designed by Kristian Sofus Hansen & Tommy Hyldahl Dimensions: L65 / W65 /H43 cm Materials: fiber concrete At...

Contemporary Jesmonite side table - Pilotis by Malgorzata Bany. Inspired by support columns that lift a building above ground or water. Each piece is formed using a mould made of ...

“Revolve” – No. 6 This is made in a limited edition of only 3 pieces + 1 AP The three sculptural furniture pieces are made in three different colors, making them all truly one of a kind. The piece in the photo has been sold, but you can request your favorite color under customization. This would be made to order and numbered as No. 02/03. The piece is made from plaster, fish glue, and pigments. It's waxed and weighs 62kg (137lb). About Revolve: The starting point of this project is rooted in Flensted Mouritzen's interest in old stucco materials and moulding techniques. It has grown into a fascination with the two-dimensional line of the running mould technique being transformed through a specifically created turning machine...

Set of 2 big foot tables tall by 101 Copenhagen Designed by Kristian Sofus Hansen & Tommy Hyldahl Dimensions: L 45 / W 45 /H 51 CM Materials: fiber conc...

Table side table by Vaust. Open edition. Dimensions: D 26 x H 53 cm. Materials: exposed concrete, aluminium. Also available: Custom material selection can be offered upon request...

X side table The subtle curves of this side table are an exquisite complement to the rigid geometry of the concrete cruciform base. The wooden tabletop is lathe-turned to a high p...

Burned black crown table tall by 101 Copenhagen Designed by Kristian Sofus Hansen & Tommy Hyldahl Dimensions: L 45 / W 45 /H 50 cm. Materials: fiber con...

The "Anchor" side table is directly inspired by the urban nautical landscape and water lined border of our neighbourhood of Red Hook Brooklyn, NY. A ...

Coffee crown table low by 101 Copenhagen Designed by Kristian Sofus Hansen & Tommy Hyldahl Dimensions: D 65 x W 65 x 41 cm. Materials: fiber concrete ...

Los Angeles-based artist James De Wulf, has been widely recognized for his original and innovative work with concrete design. Known for his commitment to pushing the limits of his ar...

Bone White crown table tall by 101 Copenhagen Designed by Kristian Sofus Hansen & Tommy Hyldahl Dimensions: L45 / W45 /H50 CM Materials: Fiber Concrete ...

Bone white crown table Low by 101 Copenhagen Designed by Kristian Sofus Hansen & Tommy Hyldahl Dimensions: L65 / W65 /H41 CM Materials: Fiber Concrete ...

Big Foot table, bone white, coffee table or side table, modern sculpture design in fibre concrete, contemporary work. Big Foot Table is made from concrete and fibre. It is inspired ...

PÅLE Sculpted side table by Lucas Tyra Morten 2018 Limited edition of 23 Dimensions: Ø 30, H 56 cm Material: Sculpted in raw concrete With element...

The Cube Series was first founded in 2013 through a partnership with an engineer-turned-concrete-artisan in Toronto to make productive (re)-use of a historic, decommissioned pump pattern that had been in storage locally for over a half century. Patterns are the original ‘positives’ used in the production of sand-cast metal parts, a method of casting dating back to 1300BC. While patterns are still commonly used in manufacturing, they are regularly decommissioned and archived in response to industry innovation. There is a growing abundance of unproductive Industrial patterns...

Contemporary Jesmonite side table - Pilotis by Malgorzata Bany. Inspired by support columns that lift a building above ground or water. Each piece is formed using a mould made of ...

Contemporary Jesmonite side table - Pilotis by Malgorzata Bany. Inspired by support columns that lift a building above ground or water. Each piece is formed using a mould made of ...

Contemporary Jesmonite side table - Pilotis by Malgorzata Bany. Inspired by support columns that lift a building above ground or water. Each piece i...

Contemporary Jesmonite side table - Pilotis by Malgorzata Bany. Inspired by support columns that lift a building above ground or water. Each piece is formed using a mould made of ...

The Metric Stool and Table translates Philipp Aduatz’s characteristic sculptural language into a compact and versatile studio edition piece. Handcrafted in small batches in collabora...

The Metric Stool and Table translates Philipp Aduatz’s characteristic sculptural language into a compact and versatile studio edition piece. Handcrafted in small batches in collabora...

The Metric Stool and Table translates Philipp Aduatz’s characteristic sculptural language into a compact and versatile studio edition piece. Handcrafted in small batches in collabora...

This side table combines black concrete with an arched steel base, echoing the compositional strategy of its rosé counterpart but in a more elemental, grounded tone. Its formal logic...

This round table combines softly pigmented green concrete with iridescent steel panels that shift in color. Its tripartite construction remains, but the play of hues adds a sensorial...

This side table combines a cast spine with two curved galvanized steel panels, creating a bold negative space t its core. Visible bolts expose the construction, giving the piece tect...

Handcrafted in Spain by expert artisans, this oval-shaped dining table from Marlot Baus combines timeless design with modern craftsmanship. Each piece is carefully made using our sig...

Rodrigo Pinto High side table From the series “Tierras Hipnóticas” (Hypnopompic lands) Manufactured by Rodrigo Pinto Santiago de Chile, 2020 Produc...

Rodrigo Pinto Oval side table From the series “Tierras Hipnóticas” (Hypnopompic lands) Manufactured by Rodrigo Pinto Santiago de Chile, 2020 Produce...

Rodrigo Pinto Gueridon From the series “Tierras Hipnóticas” (Hypnopompic lands) Manufactured by Rodrigo Pinto Santiago de Chile, 2020 Produced in ex...

ANC-66 Side Table in Natural Ash Wood And Concrete by Heilig Objects Dimensions: D 44 x W 44 x H 48 cm. Materials: Ash wood and alabaster white concrete top. Daniel Heilig. A young ...

Figura Side Table by Christian Friedl Unique Piece. Dimensions: D 73 x W 98 x H 65 cm. Materials: Oak, concrete. I`m an eye-catcher of a special kind. The oak tree I come from fell ...

“Revolve” – No. 3 in Black (no. 02/03) This is made in a limited edition of only 3 pieces + 1 AP The three sculptural furniture pieces are made in three different colors, making them all truly one of a kind. You can buy this unique piece or request your favorite color under customization. The piece is made from plaster, fish glue, and pigments. It's waxed and weighs 36kg (79.4 lb). About Revolve: The starting point of this project is rooted in Flensted Mouritzen's interest in old stucco materials and moulding techniques. It has grown into a fascination with the two-dimensional line of the running mould technique being transformed through a specifically created turning machine...

“Revolve” – No. 2 in Yellow (no. 01/03) This is made in a limited edition of only 3 pieces + 1 AP The three sculptural furniture pieces are made in three different colors, making them all truly one of a kind. You can buy this unique piece or request your favorite color under customization. The piece is made from plaster, fish glue, and pigments. It's waxed and weighs 65kg (143 lb). About Revolve: The starting point of this project is rooted in Flensted Mouritzen's interest in old stucco materials and moulding techniques. It has grown into a fascination with the two-dimensional line of the running mould technique being transformed through a specifically created turning machine...

Black Mottled Side Table by Kasanai Dimensions: D 46 x H 61 cm. Materials: Cement, recycled paper, glue, paint. 6 kg. The fusion of sturdiness and elegance, along with the blend of ...

Grey Side Table by Kasanai Dimensions: D 35 x W 30 x H 59 cm. Materials: Concrete, wood, recycled paper. 8 kg. The fusion of sturdiness and elegance, along with the blend of archaism and modernity. More than just a surface for placing objects, these tables are functional pieces of art that effortlessly become focal points within any room. Crafted with an eco-friendly mixture of cement, recycled paper, glue, and paint, this table undergoes meticulous experimentation to achieve a material closely resembling wood in its properties. The result is a natural texture and strength that ensures durability, setting it apart as a unique and sustainable piece. One remarkable attribute of this material is its slight elasticity. Unlike rigid materials that may be prone to splitting or crumbling under pressure, this table material exhibits a flexible nature, providing a level of resilience that enhances its longevity. Donatas Žukauskas...

Mason's table by MOB Limited editions of 5 + 1 prototype Designer: BAST (France) Dimensions: H 75 x D 60 x W 60 cm Material: concrete The mason’s table is conceived to be bui...

SC.45.120.AC.BL.1 (2") surface by MOB Limited editions of 15 + 1 prototype Designer: BAST (France) Dimensions: H 45 x D 120 Material: 12mm steel sheet, steel structure, white po...

Sten side table, stool by Lucas Tyra Morten 2020 Limited Edition of 15. Dimensions: D 80, W 80, H 45 cm. Material: Waxed concrete. A solid stone that grows elegantly from the ground and shapes an undefined sense to the context. Sten stool does not have a defined bottom and top which enables the observer to interact in many different ways. Objects comes with a “Certificate of Authenticity”. Objects are signed on hand casted tin...

Set of 2 Crown tables tall by 101 Copenhagen Designed by Kristian Sofus Hansen & Tommy Hyldahl Dimensions: L 45 / W 45 /H 50 cm. Materials: fiber concrete The collection of tab...

Set of 2 crown tables low by 101 Copenhagen Designed by Kristian Sofus Hansen & Tommy Hyldahl Dimensions: L 65 / W 65 /H 41 CM Materials: Fiber Concret...

Binary brass gueridon by Adam Ruiz & Robin Hervé Dimensions: 70 x 45 x 45 cm Materials: Sculpted brass and concrete Hand-sculpted Limited, signed and numbered from an edition of ...

The Cube Series was first founded in 2013 through a partnership with an engineer-turned-concrete-artisan in Toronto to make productive (re)-use of a historic, decommissioned pump pattern that had been in storage locally for over a half century. Patterns are the original ‘positives’ used in the production of sand-cast metal parts, a method of casting dating back to 1300BC. While patterns are still commonly used in manufacturing, they are regularly decommissioned and archived in response to industry innovation. There is a growing abundance of unproductive Industrial patterns...

The Cube Series was first founded in 2013 through a partnership with an engineer-turned-concrete-artisan in Toronto to make productive (re)-use of a historic, decommissioned pump pattern that had been in storage locally for over a half century. Patterns are the original ‘positives’ used in the production of sand-cast metal parts, a method of casting dating back to 1300BC. While patterns are still commonly used in manufacturing, they are regularly decommissioned and archived in response to industry innovation. There is a growing abundance of unproductive Industrial patterns...