Artemide Chairs

Wonderful set of 4 orange Selene chairs. These iconic chairs were designed by Vico Magistretti and produced by Artemide in Italy in 1969. Fully original and in great vintage conditi...

A set of two Selene stackable chairs in red resin reinforced with fiberglass, designed by Vico Magistretti in 1967 and produced by Artemide Milano in the 1970s. The Selene chair was designed in 1967 by Magistretti to be produced in a plastic material, as he affirmed: "The seat and the back are simple curved surfaces. For me, the legs represented the real image of the piece, with as small a volume as that of any common wooden chair. I solved it by exploiting the molding of a plastic material formed by a simple 3-millimeter-thick sheet with a simple but very resistant "S" cross-section which inter-related the object with ordinary chairs without however the elephant legs so untypical of chairs. It was fun working with the model maker on the wood model." When produced in series, "a unit comes out of the machine every five minutes": Selene is the fruit of a single compression molding process on a pre-impregnated sheet (Ottagono 15 / 1969). Magistretti solves the problem of leg resistance by adopting an "S-shaped" configuration that confers resistance to a sheet only 3 millimeters thick. The formal and structural solution had already been previously adopted for the Chimera lamp (a self-supporting methacrylate sheet) and in developing the legs of the Demetrio table...

Édités par Artemide dans les années 70, ces fauteuils Gaudi signés Vico Magistretti sont devenus des classiques du design italien. Avec leur silhouette sculpturale en polypropylène m...

Sedia in materiale plastico.

Selene chairs, of modern Italian design, entirely in glossy black plastic, designed by Vico Magistretti for Artemide in the 1960s. Pair of Selene model chairs with monocoque structur...

Toga chair was realized in hot-press moulded black fibreglass designed by Sergio Mazza in 1968 and manufactured by Artemide, Italy. The Toga chair is pa...

A set of two Selene stackable chairs in red resin reinforced with fiberglass, designed by Vico Magistretti in 1967 and produced by Artemide Milano in the 1970s. The Selene chair was designed in 1967 by Magistretti to be produced in a plastic material, as he affirmed: "The seat and the back are simple curved surfaces. For me, the legs represented the real image of the piece, with as small a volume as that of any common wooden chair. I solved it by exploiting the molding of a plastic material formed by a simple 3-millimeter-thick sheet with a simple but very resistant "S" cross-section which inter-related the object with ordinary chairs without however the elephant legs so untypical of chairs. It was fun working with the model maker on the wood model." When produced in series, "a unit comes out of the machine every five minutes": Selene is the fruit of a single compression molding process on a pre-impregnated sheet (Ottagono 15 / 1969). Magistretti solves the problem of leg resistance by adopting an "S-shaped" configuration that confers resistance to a sheet only 3 millimeters thick. The formal and structural solution had already been previously adopted for the Chimera lamp...

Space Age vintage armchair model Gaudi by Vico Magistretti from plastic in yellow color tone for Artemide 1968, Italy. The wonderful armchair model Gaudi in the rare color tone lemon yellow shows...