Skip to main content

Richard Schultz Side Tables

American, 1926-2021

Many of today’s most popular outdoor furniture designs exist thanks to the talents of designer Richard Schultz. His mid-century modern style introduced unimposing pieces to gardens and outdoor spaces. The airy shapes and timeless appeal of his furniture reflect his motto: “Form follows technique.”

Born Moses Richard Schultz in Lafayette, Indiana, in 1926, he displayed an early talent as an engineer, building steam engines in his family’s basement. Although he possessed an engineer’s mind, Schultz struggled with mathematics, and he dropped out of the Iowa State University mechanical engineering program. He joined the U.S. Navy, working as a radio operator. Following his military service, he enrolled at the Institute of Design in Chicago.

After he graduated in 1950, Schultz traveled to Europe, where he spent the summer sketching. When he returned to the United States in 1951, he applied for a position as a designer at the furniture company Knoll Inc. in New York City. It is said that Florence Knoll, wife of the company’s founder Hans Knoll, hired him on the spot based solely on his sketches.

Schultz’s first assignment was to assist designer Harry Bertoia with the Bertoia Wire Collection at Knoll’s factory in Pennsylvania. Schultz’s 715 Chaise Longue, with its adjustable frame and signature solid wheel, complemented Bertoia’s collection. It was acquired in 1963 by the Museum of Modern Art for its collection of contemporary furniture. Another iconic piece Schultz produced around this time was the Petal Table. Its wooden “petal” tabletop and enameled metal base were inspired by the plant Queen Anne’s lace.

In 1966, one of Schultz’s most esteemed collections, the Leisure Collection (reissued in 1992 as the 1966 Collection), was created when Florence Knoll requested some outdoor furniture for her Florida home that could withstand the salty ocean air. Schultz designed a line of aluminum patio coffee tables and lounge chairs that were not only fashionable and comfortable but would not rust.

In 1972, Knoll laid off its designers, including Schultz, and he started his design studio — Richard Schultz Design — out of a Pennsylvania farmhouse. He enjoyed success with another of his influential pieces, the Paradigm office chair, which he sold to furniture manufacturer Stow & Davis in 1978. In 2012, Knoll acquired Richard Schultz Design and re-released many of his classic works.

Schultz died in 2021. He left a legacy as one of the 20th century’s most celebrated outdoor furniture creators.

On 1stDibs, discover a range of vintage Richard Schultz tables, building and garden elements, seating and more.

7
to
1
6
1
7
7
7
7
7
7
6
Height
to
Width
to
Depth
to
6
5
1
1
1
6
6
60
387
136
135
131
Creator: Richard Schultz
'Petal' Drinks / Side Table by Richard Schultz for Knoll Associates, Signed
By Richard Schultz, Knoll
Located in Los Angeles, CA
This signed early production 'Petal' drinks table by Richard Schultz for Knoll Associates, designed in 1960, is a favorite amongst Mid-Century Modern collectors and enthusiasts. This...
Category

1960s American Mid-Century Modern Vintage Richard Schultz Side Tables

Materials

Metal

Early Pair Richard Schultz Redwood Petal Side Tables for Knoll
By Richard Schultz, Knoll
Located in Buffalo, NY
Beautifully aged tables designed by Richard Schultz manufactured by knoll,, Retains original finish ,patina, Personally, I Iove the finish,,but can easily be sanded and refinished (r...
Category

1960s American Mid-Century Modern Vintage Richard Schultz Side Tables

Materials

Metal

Richard Schultz Petal End Table for Knoll
By Knoll, Richard Schultz
Located in Brooklyn, NY
Original vintage petal end table by Richard Schultz for Knoll. This lovely end table adorns eight individual “petals” inspired by Queen Anne’s Lace. Ea...
Category

1960s Mid-Century Modern Vintage Richard Schultz Side Tables

Materials

Aluminum

Richard Schultz Petal Side Table for Knoll
By Knoll, Richard Schultz
Located in Brooklyn, NY
Vintage example of the classic Richard Schultz petal table. 1960s edition manufactured by Knoll, with original label intact. Base has been recoat...
Category

Mid-20th Century American Mid-Century Modern Richard Schultz Side Tables

Materials

Wood

Petal' End or Side Table by Richard Schultz for Knoll
By Knoll, Richard Schultz
Located in Sagaponack, NY
A Mid-Century Modern 'Petal' end/side table designed by Richard Shultz. With a flower-like pine top on a white enameled eight-point cast iron pedestal base. Manufactured in the USA b...
Category

1960s American Mid-Century Modern Vintage Richard Schultz Side Tables

Materials

Iron

Unique Richard Schultz Petal Side Table Prototype
By Richard Schultz
Located in Munich, DE
the petals of this table are made of ceramic ! the serial production petals are made of wood. natural or painted white. purchased from an former knoll employee.....
Category

1960s American Mid-Century Modern Vintage Richard Schultz Side Tables

Materials

Metal

Pair of Richard Schultz Petal Side Tables
By Knoll, Richard Schultz
Located in North Miami, FL
Always fresh and charming! Early pair of Knoll petal tables by Richard Schultz with white enameled bases and redwood tops. Over-sprayed remains of or...
Category

1960s American Mid-Century Modern Vintage Richard Schultz Side Tables

Materials

Metal

Related Items
1966 Vintage Richard Schultz for Knoll Patio Dining Table Outdoor Collection
By Knoll, Richard Schultz
Located in Chula Vista, CA
Patio table 1966 Vintage Richard Schultz for Knoll Patio Dining Table Outdoor Collection Outdoor Vintage Metal Table by Richard Schultz, Patio Din...
Category

1960s American Mid-Century Modern Vintage Richard Schultz Side Tables

Materials

Aluminum, Enamel

MR Table by Mies Van der Rohe for Knoll
By Ludwig Mies van der Rohe, Knoll
Located in Hawthorne, CA
MR Table designed by Mies Van Der Rohe executes his iconic bent tubular chrome frame combined with thick glass top. Originally designed for the Tugendhat Hous...
Category

1970s Unknown Mid-Century Modern Vintage Richard Schultz Side Tables

Materials

Chrome

Unique Richard Schultz Coffee Table for Knoll International
By Richard Schultz
Located in Munich, DE
I never saw this model before not in real life and not in any Knoll catalog. Tabletop is teakwood.
Category

1950s German Mid-Century Modern Vintage Richard Schultz Side Tables

Materials

Teak

Richard Schultz Vintage Cocktail Table
By Richard Schultz
Located in Water Mill, NY
Vintage Richard Schultz cocktail table with enameled steel top and aluminum frame for Knoll.
Category

Mid-20th Century American Mid-Century Modern Richard Schultz Side Tables

Materials

Aluminum, Steel

Richard Schultz Vintage Cocktail Table
Richard Schultz Vintage Cocktail Table
H 15.25 in W 28 in D 28 in
Mid-Century Modern 1966 Richard Schultz for Knoll Square Patio Dining Table
By Richard Schultz, Knoll
Located in Philadelphia, PA
A classic outdoor patio dining table designed by Richard Schultz for Knoll. It features gray frame with white porcelain top. Clean ready to use condition.
Category

1990s American Mid-Century Modern Richard Schultz Side Tables

Materials

Aluminum, Steel

Richard Schultz 1996 Series Coffee Table
By Knoll, Richard Schultz
Located in Chicago, IL
Richard Schultz outdoor coffee table for Knoll. This table has a white powder-coated cast and extruded aluminum frame with white enameled porcelain on steel tabletop. The table has a...
Category

1960s American Mid-Century Modern Vintage Richard Schultz Side Tables

Materials

Steel

Pair of Richard Schultz Cocktail Tables
By Knoll, Richard Schultz
Located in Stockton, NJ
A pair of vintage 1960s Richard Schultz for Knoll cocktail tables- with a twist. Each has been repainted in matte black and the tops replaced with thick slate.
Category

1960s North American Mid-Century Modern Vintage Richard Schultz Side Tables

Materials

Slate, Aluminum

Pair of Richard Schultz Cocktail Tables
Pair of Richard Schultz Cocktail Tables
H 15.25 in W 28 in D 28 in
Richard Schultz for Knoll 'Petal' Coffee Table
By Knoll, Richard Schultz
Located in Brooklyn, NY
Circular mid-century coffee table designed by Richard Schultz for Knoll. Made of composite top on metal legs. This series was specifically designed to accompany the ‘Diamond’ chairs ...
Category

Mid-20th Century Mid-Century Modern Richard Schultz Side Tables

Materials

Aluminum

Hans Bellman for Knoll Tripod End or Side Tables
By Hans Bellmann, Knoll
Located in Atlanta, GA
Sculptural Tripod Tables, designed by Hans Bellmann for Knoll, American, circa 1960s. They are a versatile size and can be used as side or end tables, or as nightstands. Low maintena...
Category

1960s American Mid-Century Modern Vintage Richard Schultz Side Tables

Materials

Metal

Warren Platner for Knoll Mid Century End Table
By Knoll, Warren Platner
Located in Countryside, IL
Warren Platner for Knoll Mid Century End Table This table measures: 16 wide x 16 deep x 18.25 inches high, with a glass top of 24 ...
Category

1970s American Mid-Century Modern Vintage Richard Schultz Side Tables

Materials

Brass

Original Richard Schultz Rosewood Coffee Table for Knoll, 1970s
By Knoll, Richard Schultz
Located in Miami, FL
Original Richard Schultz Rosewood Coffee Table for Knoll 1970s, rosewood veneered wood with chromed steel legs. Nice condition with some normal scratches ...
Category

1970s American Mid-Century Modern Vintage Richard Schultz Side Tables

Materials

Steel, Chrome

Platner Side Table by Knoll in Rare Copper
By Warren Platner, Knoll
Located in Highland, IN
With his "Platner Collection" for Knoll in 1966, Warren Platner introduced a richness and luxury to post-war American modernism that had not existed previously. The matching group included side chairs, lounge chairs, a settee and tables. They were offered in polished chrome, rich bronze, and for a single year in 1969, in copper. The smallest of the collection of tables Warren Platner designed for Knoll in 1966, this side table nonetheless has great visual presence. The wire rods of the base capture space, create shifting moire' patterns, and support the top. This rare copper...
Category

1960s American Mid-Century Modern Vintage Richard Schultz Side Tables

Materials

Copper

Previously Available Items
Pair of Schultz Petal Tables
By Knoll, Richard Schultz
Located in Kalamazoo, MI
This pair of Petal Tables designed by Richard Schultz features beautifully weathered rosewood petals in a variety of gray tones. Sold by Knoll International in approximately 1965. Ea...
Category

Mid-20th Century American Mid-Century Modern Richard Schultz Side Tables

Materials

Rosewood

Mid-Century Modern Outdoor Enameled Cocktail Table Richard Schultz for Knoll
By Richard Schultz, Florence Knoll
Located in Port Jervis, NY
Fabulous cocktail table by Richard Schultz for Knoll in enameled steel top, orange and a powder coated base, circa 1974. Some minor chips to the top mostly on the corners which have ...
Category

1960s American Mid-Century Modern Vintage Richard Schultz Side Tables

Materials

Aluminum, Steel

1960s Richard Schultz for Knoll Coffee Side Table
By Richard Schultz, Knoll
Located in Miami, FL
Classic Richard Schultz table design for Knoll. Designed for outside use and great for the inside as well. Bright, crisp and sunny yellow over a white lacquered base. Re-lacquered an...
Category

1960s American Mid-Century Modern Vintage Richard Schultz Side Tables

Materials

Metal, Aluminum

Sculptural Petal Table by Richard Schultz for Knoll
By Knoll, Richard Schultz
Located in Atlanta, GA
Sculptural "Petal" table, designed by Richard Schultz for Knoll, American, circa 1960s. Retains it's wonderfully patinated original finish. This table is a versatile size and is perf...
Category

1960s American Mid-Century Modern Vintage Richard Schultz Side Tables

Materials

Metal

Contemporary Modern Richard Schultz Knoll Corner Accent Side Table Gunmetal
By Knoll, Richard Schultz
Located in Keego Harbor, MI
For your consideration is a gorgeous accent corner table, with a gunmetal base, by Richard Shultz for Knoll, circa 1990s. In excellent condition. The dimensions are 29.5" W x 27" D x...
Category

1990s American Richard Schultz Side Tables

Materials

Metal

Pair of Richard Schultz Outdoor Chairs and Medium Table
By Richard Schultz
Located in Phoenix, AZ
Richard Schultz’s 1966 Collection is regarded as the first modern outdoor furniture and has remained the category standard ever since. Schultz designed the 1966 collection at the request of Florence Knoll after she retired. She wanted outdoor furniture that could withstand corrosive Florida ocean air. This pair of white chairs...
Category

1980s North American Mid-Century Modern Vintage Richard Schultz Side Tables

Materials

Aluminum, Enamel, Steel

Pair of Early Richard Schultz Petal Tables by Knoll, 1960's
By Richard Schultz
Located in Ft Lauderdale, FL
Pair of early Richard Schultz Petal tables by Knoll, 1960's in white lacquer tops with enameled bases. Early Knoll label. Color varies due ...
Category

Mid-20th Century Mid-Century Modern Richard Schultz Side Tables

Materials

Metal

Richard Schultz for Knoll Petal Side Table
By Richard Schultz
Located in Phoenix, AZ
This iconic 1970s Knoll petal side table by Richard Shultz is the perfect way to add some midcentury whimsy to any room. The white aluminum base is powder ...
Category

1970s American Mid-Century Modern Vintage Richard Schultz Side Tables

Materials

Aluminum

Richard Schultz Petal Tables
By Knoll, Richard Schultz
Located in Chicago, IL
Schultz for Knoll indoor or outdoor tables, Schultz cites Queen Anne's Lace as his inspiration for these delicate tables with its flower-like top sprouting from the elegant pedestal ...
Category

1960s American Mid-Century Modern Vintage Richard Schultz Side Tables

Materials

Metal

Richard Schultz Petal Side Table by Knoll
By Knoll, Richard Schultz
Located in Utrecht, NL
Side or end table with eight individual teak wood “petals”, each supported by its own branch, which stems from the original steel and aluminum base. A whimsical yet highly functional...
Category

1960s American Mid-Century Modern Vintage Richard Schultz Side Tables

Materials

Aluminum, Steel

Sculptural "Petal" Table Designed by Richard Schultz
By Richard Schultz
Located in Atlanta, GA
Sculptural "Petal" table designed by Richard Schultz for Knoll, American, circa 1960s. This example has had the petals refinished and the base repainted. This table is a versatile si...
Category

1960s American Mid-Century Modern Vintage Richard Schultz Side Tables

Materials

Metal

Richard Schultz for Knoll Petal Side Table
By Richard Schultz
Located in St.Petersburg, FL
A nice Richard Schultz for Knoll "Petal" table, circa 1960s. Another one available to make a pair.
Category

1960s American Mid-Century Modern Vintage Richard Schultz Side Tables

Richard Schultz side tables for sale on 1stDibs.

Richard Schultz side tables are available for sale on 1stDibs. These distinctive items are frequently made of metal and are designed with extraordinary care. There are many options to choose from in our collection of Richard Schultz side tables, although brown editions of this piece are particularly popular. Many of the original side tables by Richard Schultz were created in the mid-century modern style in united states during the mid-20th century. If you’re looking for additional options, many customers also consider side tables by Lawrence Peabody, Tony Paul, and Founders Furniture Company. Prices for Richard Schultz side tables can differ depending upon size, time period and other attributes — on 1stDibs, these items begin at $1,175 and can go as high as $4,200, while a piece like these, on average, fetch $2,600.

Recently Viewed

View All