Acrylic Lighting

A member of the Ktribe family of products, this inspiring table light provides diffused light through a transparent diffuser that gracefully moves the eye upward. The base, rod, and ...

Pair of flush mount ceilings lamps with brass frames and acrylic diffusion. Produced in Sweden, 1960s. Please note: listed pirce is for (1) one lamps.

Pipeline Chandelier 7 Design: Caine Heintzman, Editor: AND Light By definition, the Pipeline Chandelier features a cylindrical arrangement of linear illuminated sections cinched ...

Pair Lucite and Chrome Lamps signed Hansen New York. Designed by Karl Springer. Lucite and Chrome construction.

A teak, acrylic table lamp designed and produced by a Swedish Designer, Sweden, 1960s. Socket takes standard E-26 medium base bulb. There is no maximum wattage stated on the fi...

Lattis is conceived as a light piece of jewelry for the interior. It’s something personal, emotional, and fills the space with a strong aesthetic and a dynamic atmosphere. Made of standardised basic units, Lattis can be assembled in multiple ways to address spatial requirements and lighting needs. Its plates can be adjusted to allow direct lighting...

An acrylic and nickel-plated brass wall light designed and produced by Stilux Milano, Italy, 1960s. Dimensions of back plate (inches) : 3.1 x 1.8 x 0.4 (Height x Width x Depth) ...

Gweilo Zhou H PE by Partisans It’s name means ghost in chinese. Makes sense when you look at it, right? Made from hand-molded acrylic. Suspension lamp. Hand-moulded, transparent ac...

A pair of brass and red, white and yellow-coloured acrylic table lamps designed and produced by an Italian Designer, Italy, 1950s. Sockets take E-14 bulbs. There is no maximum ...

Floating lights Model A.16.01.E64 (Form.Rows.Version.Number of Elements) Form: a (arch or half circle) Rows: 15 (16 lines) Version: 1 Number of elements: 64 lighting elements ...

A brass, acrylic, pine and moulded pine veneer floor lamp designed and produced in Sweden, 1960s. Sold with lampshade. Dimensions stated refer to the floor lamp with the lampshade.

These large dramatic original domes have a 20 inch diameter. There is a dramatic pleated pattern that curves over the top and a flared ribbed edge. We restored these lamps in a hard ...

These wall-lamps or sconces were designed by Claus Bolby and manufactured by his own company Cebo Industri in Denmark. The lamps come with a composition of yellow acrylics blocs/ba...

This floor lamp, model 'Ruban' (ribbon), was designed by Jacques Charles around 1965. Just like many other Charles designs from that period it’s shade is made out of folded metal, wh...

Cylinder shaped white acrylic shade with aluminum gold-plated buttons with floral motifs. Fitted with 3 E27 sockets. Normal singhs of use. Up to 2 available, price per lamp.

A brass, marble, teak and acrylic floor lamp designed and produced in Italy, c. 1950s. Sold with Lampshade. Stated dimensions refer to the Floor Lamp with the Shade.

A brass and acrylic sconce designed and produced in Sweden, c. 1950s. Variable dimensions, measured as illustrated in the first image. Backplate Dimensions (inches): 4.75" H x 2....

A metal and acrylic, two-light sconce designed and produced in Italy, c. 1950s. Overall Dimensions (inches): 19.31"H x 4.06"W x 6.06"D Backplate Dimensions (inches): 2.81 Diameter ...

Brand: Verpan Design: Verner Panton Model: Moon Opal Pendant Ø34 Originally designed in 1960, the Moon Pendant is one of Verner Panton's earliest lighting designs and an iconic exam...

Marco Zanuso Model 275 'Zanuso' table lamp in white for Oluce. Executed in white metal and opal perspex diffuser, this is one of the most refined Minimalist Italian designs of the ...

Art Deco Walter Von Nessen Pattyn Style Aluminum & Acrylic Skyscraper Table Lamp. Item features an acrylic base, aluminum "skyscraper" column, sleek sculptural form. Circa Early 20th...

Pair of acrylic wall lights designed and produced in Sweden, c. 1960s. Overall Dimensions (inches): 8.5"H x 4.5"W x 4.25"D Backplate Dimensions (inches): 2.125"H x 1.375"W x 0.125"...

1970 s table lamp from Italy ,in original vintage condition adjustable heights and shade can pivot from left to right and up and down . The lowest shade height is 14.5 and the highes...

Inspired by the shape of the hourglass, the Clessidra lamp from Antonio Citterio emits diffused direct and indirect light. This stunning wall light has a body made of die-cast alumin...

Large Space Age table lamp produced by Fagerhults in the 1970s. Base made of chromed metal and shade of chromed metal / acrylic.

Pair of large gilt metal sconces with molded glass leaves and flowers. Shaped like an urn with branches of flowers. Five lights each. Measurements Height: 30" Depth: 11.5" Width: 20.5"

Gio Ponti 'Luna Verticale' Floor Lamp in Brass for Tato Italia Originally designed by Italian icon Gio Ponti in 1957, the 'Luna Verticale' floor lamp is an authorized re-edition by ...

A two-armed, brass and acrylic table lamp, designed and produced in Finland, 1960s. Overall Dimensions (inches): 13.75” H x 18.5" W x 5" D Wear consistent with age and use Bulb Sp...

Thorn Preinet, England. Black metal and acrylic shades. A pair of wall lamps (downlight). In perfect condition. 1960/70s. Without cord. Two bulbs are included. Measures: length...

A member of the K-tribe family of products, this inspiring table light provides diffused light through a transparent diffuser that gracefully moves the eye upward. The base, rod, and...

I’ve been trying to identify who designed and produced this 'cool af' lamp since I bought it in Italy over a decade ago. The white plexi reflectors call to mind Joe Colombo’s semi-spherical Continental bookshelves. It also evokes the Quasar Model by Gianfranco Fini for Edition New Lamp, Roma. It would certainly be companionable with Gino Sarfatti’s model 548...

Halo pendant light by Levitron. A circular direct & indirect luminary offering elegant architectural design while delivering efficient and even ligh...

This minimalistic 'L-shaped' designed floor lamp was made in the 1970's/1980's. It is made out of white lacquered metal and a heavy, black, metal base. The inbuild reflector provides...

Vintage Hollywood Regency Brass Empire Style Acrylic Column Green Pink and Gold Table Lamps by Crystal Clear Ind. - Pair. Item features acrylic shafts in green and pink with pink pai...

Pipeline pendant CM-4-P Design: Caine Heintzman, Editor: AND Light Materials: – Aluminum body – Cast acrylic Dimensions: 146 x 62 x 7.5 cm 57,5” x 24,5“ x 3” Adjustable drop length...

Vintage Art Deco Style Figural Frosted Acrylic and Glass Torchiere Floor Lamp. Item features a glass torchiere shade, brass plated figural accents, frosted acrylic shaft, salmon and ...

Cypress Light by Kim Mesches H 60" x W 27" x D 14" Hand-Dyed Mesh, Epoxy, Acrylic Base, LED Light Available Rooted in themes of movement and transformation, the sculptures evoke...

Suspension lamp 'Sonora' designed by Vico Magistretti in 1976. Suspension lamp, giving direct and diffused light in blown PMMA. Manufactured by Oluce, Italy. The story of Sonora ...

Huge oversize pendant lamp in glossy white acrylic. Suspended by an adjustable cable, it houses four E27 bulbs that cast a warm, diffused glow. A timeless piece of Elio Martinelli’s ...

1950s Floor lamp, signed Maison Arlus. Metal frame and teak panels, two removable molded acrylic shades, and two independent switches at the base, each controlling one side. The fl...

Contemporary pendant lamp 'Iris' Electrical : Voltage: 120 V – 277 V Lamp: Integral 34 W 35 V DC LED The model shown in picture: - Diameter: 90 cm Height. 30 cm - Finish: Silver - Wire height: 300 cm (adjustable drop length) - Modules : B and B...

The timeless Elise lamp pays tribute to the advent of the machine age. Its refined machined aluminum base combined with its towering frosted acrylic diffuse...

Postmodern Clear Acrylic and Chrome Five-Light Chandelier, the chrome support with with black resin spheres terminating in black patinated circular base with five chrome arms and lig...

Newly lacquered in a brilliant white hi-gloss, enameled finish, with a tapered neck base. Newly plated and polished brass details. Brass base, atomic symbol center, end caps, neck st...

Italian Modernist Teakwood Table Lamps with Acrylic Curved Shades, 1950s Gorgeous pair of Italian table lamps made during the mid-century, approx. 1950s. Reminds strongly to the Gin...

Rare Pair of Lamps and Flower Vase Cubo Luce by Studio OPI for Cini&Nils, Made in Italy, 1970s.  Rare Pair of Lamps and Minimal Flower Vase in white acrylic, Model Cubo Luce, Designe...

Ceiling lamp model Stoby designed by Konsthantverk and manufactured by themselves. The production of lamps, wall lights and floor lamps are manufactured using craftsman’s technique...

Assembled in the 1980’s these shells have a nice patina With lucite circular bases and new shades Measurement is to the top of the finial Shade measurements: 12 height x 18.13 diam...

A striking study in light, reflection, and form, this large “Sconfine Sfera” pendant by Matteo Thun for Zumtobel is a perfect embodiment of the designer’s poetic minimalism. Combinin...

Ettore Sottsass was an influential Italian architect and designer whose work reshaped postwar design thinking. Born in 1917, he became a central figure in 20th-century design, moving...

This model “625” lamp is designed by Elio Martinelli in 1968 for Martinelli Luce. No words needed for this amazing space age mushroom lamp. The base is made of enameled metal with t...

This elegant tripod floor lamp has a mid-century inspired design. The lamp has a brass body with hand-stitched leather accents. The light is diffused by acrylic diffusers which provi...

An adjustable metal and white acrylic pendant light likely designed and produced in Italy, c. 1970s. Wear consistent with age and use. Variable drop. Overall Dimensions (inches): ...

VALE - Pendant lamp Design: Caine Heintzman, Editor: ANDLight The Vale series optimises functionality through its multidirectional luminescence while diffusing soft ambient light...

NILS KÄHLER. Rare ceiling lamp, Denmark, mid 20th century. Top and bottom in golden glazed ceramic with geometric relief pattern. Fixation of white lacquered steel and lampshade in ...

Midcentury pendant lamp by Claus Bolby. Aluminum brass finish with transparent acrylic molded art inlay detail. Beautiful art lamp having glowing of the acrylic when illuminated. Wi...

1846 Italian modern 2 light ceiling light clear glass panel with frosted acrylic side panels

Stunning large high-quality luxury 24-carat brass-plated chandelier. Very shiny with fabulous mirror effect and sparkling countless clear acrylic crystal faceted beads (a pair availa...

A set of three pending lamps of different sizes designed by Miguel Milá, circa 1970. Manufactured by Tramo (Spain). In good original condition, with minor wear consistent with age and use. Miguel Milá represents like no other person Spanish contemporary design. He belongs to the Pioneer's generation of the 1950s and has seen how many of his pieces of furniture and lamps have become real classics. Miguel Milá was born in a Catalan aristocratic family with strong links with the artistic world (his ancestors assigned the Milá House, also known as La Pedrera, to Gaudí) and started working as an interior designer in the architecture studio of his brother Alfonso Milá and Federico Correa. It was the end of the 1950s, a time of crisis when Spain hardly knew what Industrial Design was. There was practically no industry, everything was generally handmade. This framework marked the way Miguel Milá understood design, being sensitive to the pleasure of touching and closer to traditional techniques. Despite the shortage of objects, means and raw materials of the time, Miguel Milá started designing lamps and furniture, that he soon manufactured in his own company, Tramo. Miguel Milá set up this company with two friends, architects F. Ribas Barangé and E. Pérez Ullibari. This is how Miguel Milá got involved with Industrial Design. Out of Tramo, apocopation of Trabajos molestos (annoying works, that is, all the things little brothers have to do), many projects came out. For instance, he developed the previous versions of the famous TMC and TMM lamps (1958 and 1961), timeless Classic designs that are still selling nowadays. Sometime after, he set up his own Industrial and interior design studio. Miguel Milá participated with the designers and architects of that period in the first meetings in Barcelona to discuss on modernity in architecture, out of which came the question of how to promote design and implant its professional practice. These meetings culminated in the foundation of the ADI-FAD, together with Antoni de Moragas, André Ricard, Bohigas, Cirici Pellicer, Manel Cases and Rafael Marquina. From its beginnings, this association sought to foster Spanish design abroad, and to make a connection between young Spanish professionals and international design. "I am in reality a pre-Industrial designer- has Milá stated-. I feel more comfortable with the technical procedures that allow correcting failures, experimenting during the process, and controlling it to the maximum. That is where my preference for noble materials comes from, the preference for materials that know how to age." This is the case, among others, of the wooden Cesta lamps...

A pendant light that feels as at home in an industrial space as it would in museum exhibit: The OK Light plays with expectations to provide functional light that is surprising and ea...